This program will read flirc keystrokes, as read as keyboard input, then transmit associated IR signals as configured.
First, use Flirc or flirc_util to configure the input IR signals to keys as usual. Then use the
debug mode to read the IR signals to retransmit, as used for flirc_util sendir. Store them in
config.txt with the key id follwed by the IR code.
My config.txt:
115 0,2417,534,633,526,1202,555,633,526,631,527,1222,535,632,527,630,529,628,530,627,532,625,534,609,550,1223,534,1226,531,605,554,624
115 0,2418,534,633,526,1203,555,623,535,632,527,1222,535,632,527,630,528,629,530,627,532,625,534,623,536,1224,533,1226,536,621,533,624
114 0,2395,556,1204,554,1195,561,607,553,624,535,1225,532,604,555,602,556,601,558,630,529,597,562,595,564,1195,562,1229,528,629,530,607
114 0,2396,556,1202,555,1204,554,624,534,614,545,1223,535,619,539,601,558,599,560,597,561,628,531,631,528,1195,563,1228,529,597,563,641
To build you'll need the flirc sdk, libusb-1.0, and libhidapi-hidraw. Tested on Raspberry Pi.