Skip duplicate actions for CI #16

usaleem-ix · 2022-02-04T19:36:04Z

With the default workflow, GitHub Actions are invoked on every push and pull request. This commit adds the functionality to check if a previous successful run is present, then skip re-run for its pull request.

With the default workflow, GitHub Actions are invoked on every push and pull request. This commit adds the functionality to check if a previous successful run is present, then skip re-run for its pull request. Signed-off-by: Umer Saleem <[email protected]>

ghost

Looks like it works!

[ Upstream commit 4224cfd ] When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. Signed-off-by: suresh kumar <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 614c0b9 ] We may call arm64_apply_bp_hardening() early during entry (e.g. in el0_ia()) before it is safe to run instrumented code. Unfortunately this may result in running instrumented code in two cases: * The hardening callbacks called by arm64_apply_bp_hardening() are not marked as `noinstr`, and have been observed to be instrumented when compiled with either GCC or LLVM. * Since arm64_apply_bp_hardening() itself is only marked as `inline` rather than `__always_inline`, it is possible that the compiler decides to place it out-of-line, whereupon it may be instrumented. For example, with defconfig built with clang 13.0.0, call_hvc_arch_workaround_1() is compiled as: | <call_hvc_arch_workaround_1>: | d503233f paciasp | f81f0ffe str x30, [sp, #-16]! | 320183e0 mov w0, #0x80008000 | d503201f nop | d4000002 hvc #0x0 | f84107fe ldr x30, [sp], #16 | d50323bf autiasp | d65f03c0 ret ... but when CONFIG_FTRACE=y and CONFIG_KCOV=y this is compiled as: | <call_hvc_arch_workaround_1>: | d503245f bti c | d503201f nop | d503201f nop | d503233f paciasp | a9bf7bfd stp x29, x30, [sp, #-16]! | 910003fd mov x29, sp | 94000000 bl 0 <__sanitizer_cov_trace_pc> | 320183e0 mov w0, #0x80008000 | d503201f nop | d4000002 hvc #0x0 | a8c17bfd ldp x29, x30, [sp], #16 | d50323bf autiasp | d65f03c0 ret ... with a patchable function entry registered with ftrace, and a direct call to __sanitizer_cov_trace_pc(). Neither of these are safe early during entry sequences. This patch avoids the unsafe instrumentation by marking arm64_apply_bp_hardening() as `__always_inline` and by marking the hardening functions as `noinstr`. This avoids the potential for instrumentation, and causes clang to consistently generate the function as with the defconfig sample. Note: in the defconfig compilation, when CONFIG_SVE=y, x30 is spilled to the stack without being placed in a frame record, which will result in a missing entry if call_hvc_arch_workaround_1() is backtraced. Similar is true of qcom_link_stack_sanitisation(), where inline asm spills the LR to a GPR prior to corrupting it. This is not a significant issue presently as we will only backtrace here if an exception is taken, and in such cases we may omit entries for other reasons today. The relevant hardening functions were introduced in commits: ec82b56 ("arm64: Implement branch predictor hardening for Falkor") b092201 ("arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support") ... and these were subsequently moved in commit: d4647f0 ("arm64: Rewrite Spectre-v2 mitigation code") The arm64_apply_bp_hardening() function was introduced in commit: 0f15adb ("arm64: Add skeleton to harden the branch predictor against aliasing attacks") ... and was subsequently moved and reworked in commit: 6279017 ("KVM: arm64: Move BP hardening helpers into spectre.h") Fixes: ec82b56 ("arm64: Implement branch predictor hardening for Falkor") Fixes: b092201 ("arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support") Fixes: d4647f0 ("arm64: Rewrite Spectre-v2 mitigation code") Fixes: 0f15adb ("arm64: Add skeleton to harden the branch predictor against aliasing attacks") Fixes: 6279017 ("KVM: arm64: Move BP hardening helpers into spectre.h") Signed-off-by: Mark Rutland <[email protected]> Cc: Ard Biesheuvel <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: James Morse <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Mark Brown <[email protected]> Cc: Will Deacon <[email protected]> Acked-by: Marc Zyngier <[email protected]> Reviewed-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit fe2640b ] In remove_phb_dynamic() we use &phb->io_resource, after we've called device_unregister(&host_bridge->dev). But the unregister may have freed phb, because pcibios_free_controller_deferred() is the release function for the host_bridge. If there are no outstanding references when we call device_unregister() then phb will be freed out from under us. This has gone mainly unnoticed, but with slub_debug and page_poison enabled it can lead to a crash: PID: 7574 TASK: c0000000d492cb80 CPU: 13 COMMAND: "drmgr" #0 [c0000000e4f075a0] crash_kexec at c00000000027d7dc #1 [c0000000e4f075d0] oops_end at c000000000029608 #2 [c0000000e4f07650] __bad_page_fault at c0000000000904b4 #3 [c0000000e4f076c0] do_bad_slb_fault at c00000000009a5a8 #4 [c0000000e4f076f0] data_access_slb_common_virt at c000000000008b30 Data SLB Access [380] exception frame: R0: c000000000167250 R1: c0000000e4f07a00 R2: c000000002a46100 R3: c000000002b39ce8 R4: 00000000000000c0 R5: 00000000000000a9 R6: 3894674d000000c0 R7: 0000000000000000 R8: 00000000000000ff R9: 0000000000000100 R10: 6b6b6b6b6b6b6b6b R11: 0000000000008000 R12: c00000000023da80 R13: c0000009ffd38b00 R14: 0000000000000000 R15: 000000011c87f0f0 R16: 0000000000000006 R17: 0000000000000003 R18: 0000000000000002 R19: 0000000000000004 R20: 0000000000000005 R21: 000000011c87ede8 R22: 000000011c87c5a8 R23: 000000011c87d3a0 R24: 0000000000000000 R25: 0000000000000001 R26: c0000000e4f07cc8 R27: c00000004d1cc400 R28: c0080000031d00e8 R29: c00000004d23d800 R30: c00000004d1d2400 R31: c00000004d1d2540 NIP: c000000000167258 MSR: 8000000000009033 OR3: c000000000e9f474 CTR: 0000000000000000 LR: c000000000167250 XER: 0000000020040003 CCR: 0000000024088420 MQ: 0000000000000000 DAR: 6b6b6b6b6b6b6ba3 DSISR: c0000000e4f07920 Syscall Result: fffffffffffffff2 [NIP : release_resource+56] [LR : release_resource+48] #5 [c0000000e4f07a00] release_resource at c000000000167258 (unreliable) #6 [c0000000e4f07a30] remove_phb_dynamic at c000000000105648 #7 [c0000000e4f07ab0] dlpar_remove_slot at c0080000031a09e8 [rpadlpar_io] #8 [c0000000e4f07b50] remove_slot_store at c0080000031a0b9c [rpadlpar_io] #9 [c0000000e4f07be0] kobj_attr_store at c000000000817d8c #10 [c0000000e4f07c00] sysfs_kf_write at c00000000063e504 #11 [c0000000e4f07c20] kernfs_fop_write_iter at c00000000063d868 #12 [c0000000e4f07c70] new_sync_write at c00000000054339c #13 [c0000000e4f07d10] vfs_write at c000000000546624 #14 [c0000000e4f07d60] ksys_write at c0000000005469f4 #15 [c0000000e4f07db0] system_call_exception at c000000000030840 #16 [c0000000e4f07e10] system_call_vectored_common at c00000000000c168 To avoid it, we can take a reference to the host_bridge->dev until we're done using phb. Then when we drop the reference the phb will be freed. Fixes: 2dd9c11 ("powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb)") Reported-by: David Dai <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Tested-by: Sachin Sant <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit e4a41c2 ] The following error is reported when running "./test_progs -t for_each" under arm64: bpf_jit: multi-func JIT bug 58 != 56 [...] JIT doesn't support bpf-to-bpf calls The root cause is the size of BPF_PSEUDO_FUNC instruction increases from 2 to 3 after the address of called bpf-function is settled and there are two bpf-to-bpf calls in test_pkt_access. The generated instructions are shown below: 0x48: 21 00 C0 D2 movz x1, #0x1, lsl truenas#32 0x4c: 21 00 80 F2 movk x1, #0x1 0x48: E1 3F C0 92 movn x1, #0x1ff, lsl truenas#32 0x4c: 41 FE A2 F2 movk x1, #0x17f2, lsl truenas#16 0x50: 81 70 9F F2 movk x1, #0xfb84 Fixing it by using emit_addr_mov_i64() for BPF_PSEUDO_FUNC, so the size of jited image will not change. Fixes: 69c087b ("bpf: Add bpf_for_each_map_elem() helper") Signed-off-by: Hou Tao <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected] Signed-off-by: Sasha Levin <[email protected]>

…g the sock [ Upstream commit 3cf7203 ] There is a race condition in vxlan that when deleting a vxlan device during receiving packets, there is a possibility that the sock is released after getting vxlan_sock vs from sk_user_data. Then in later vxlan_ecn_decapsulate(), vxlan_get_sk_family() we will got NULL pointer dereference. e.g. #0 [ffffa25ec6978a38] machine_kexec at ffffffff8c669757 truenas#1 [ffffa25ec6978a90] __crash_kexec at ffffffff8c7c0a4d truenas#2 [ffffa25ec6978b58] crash_kexec at ffffffff8c7c1c48 truenas#3 [ffffa25ec6978b60] oops_end at ffffffff8c627f2b truenas#4 [ffffa25ec6978b80] page_fault_oops at ffffffff8c678fcb truenas#5 [ffffa25ec6978bd8] exc_page_fault at ffffffff8d109542 truenas#6 [ffffa25ec6978c00] asm_exc_page_fault at ffffffff8d200b62 [exception RIP: vxlan_ecn_decapsulate+0x3b] RIP: ffffffffc1014e7b RSP: ffffa25ec6978cb0 RFLAGS: 00010246 RAX: 0000000000000008 RBX: ffff8aa000888000 RCX: 0000000000000000 RDX: 000000000000000e RSI: ffff8a9fc7ab803e RDI: ffff8a9fd1168700 RBP: ffff8a9fc7ab803e R8: 0000000000700000 R9: 00000000000010ae R10: ffff8a9fcb748980 R11: 0000000000000000 R12: ffff8a9fd1168700 R13: ffff8aa000888000 R14: 00000000002a0000 R15: 00000000000010ae ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 truenas#7 [ffffa25ec6978ce8] vxlan_rcv at ffffffffc10189cd [vxlan] truenas#8 [ffffa25ec6978d90] udp_queue_rcv_one_skb at ffffffff8cfb6507 truenas#9 [ffffa25ec6978dc0] udp_unicast_rcv_skb at ffffffff8cfb6e45 truenas#10 [ffffa25ec6978dc8] __udp4_lib_rcv at ffffffff8cfb8807 truenas#11 [ffffa25ec6978e20] ip_protocol_deliver_rcu at ffffffff8cf76951 truenas#12 [ffffa25ec6978e48] ip_local_deliver at ffffffff8cf76bde truenas#13 [ffffa25ec6978ea0] __netif_receive_skb_one_core at ffffffff8cecde9b truenas#14 [ffffa25ec6978ec8] process_backlog at ffffffff8cece139 truenas#15 [ffffa25ec6978f00] __napi_poll at ffffffff8ceced1a truenas#16 [ffffa25ec6978f28] net_rx_action at ffffffff8cecf1f3 truenas#17 [ffffa25ec6978fa0] __softirqentry_text_start at ffffffff8d4000ca truenas#18 [ffffa25ec6978ff0] do_softirq at ffffffff8c6fbdc3 Reproducer: https://github.com/Mellanox/ovs-tests/blob/master/test-ovs-vxlan-remove-tunnel-during-traffic.sh Fix this by waiting for all sk_user_data reader to finish before releasing the sock. Reported-by: Jianlin Shi <[email protected]> Suggested-by: Jakub Sitnicki <[email protected]> Fixes: 6a93cc9 ("udp-tunnel: Add a few more UDP tunnel APIs") Signed-off-by: Hangbin Liu <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit ca02549 ] Set kprobe at 'jalr 1140(ra)' of vfs_write results in the following crash: [ 32.092235] Unable to handle kernel access to user memory without uaccess routines at virtual address 00aaaaaad77b1170 [ 32.093115] Oops [truenas#1] [ 32.093251] Modules linked in: [ 32.093626] CPU: 0 PID: 135 Comm: ftracetest Not tainted 6.2.0-rc2-00013-gb0aa5e5df0cb-dirty truenas#16 [ 32.093985] Hardware name: riscv-virtio,qemu (DT) [ 32.094280] epc : ksys_read+0x88/0xd6 [ 32.094855] ra : ksys_read+0xc0/0xd6 [ 32.095016] epc : ffffffff801cda80 ra : ffffffff801cdab8 sp : ff20000000d7bdc0 [ 32.095227] gp : ffffffff80f14000 tp : ff60000080f9cb40 t0 : ffffffff80f13e80 [ 32.095500] t1 : ffffffff8000c29c t2 : ffffffff800dbc54 s0 : ff20000000d7be60 [ 32.095716] s1 : 0000000000000000 a0 : ffffffff805a64ae a1 : ffffffff80a83708 [ 32.095921] a2 : ffffffff80f160a0 a3 : 0000000000000000 a4 : f229b0afdb165300 [ 32.096171] a5 : f229b0afdb165300 a6 : ffffffff80eeebd0 a7 : 00000000000003ff [ 32.096411] s2 : ff6000007ff76800 s3 : fffffffffffffff7 s4 : 00aaaaaad77b1170 [ 32.096638] s5 : ffffffff80f160a0 s6 : ff6000007ff76800 s7 : 0000000000000030 [ 32.096865] s8 : 00ffffffc3d97be0 s9 : 0000000000000007 s10: 00aaaaaad77c9410 [ 32.097092] s11: 0000000000000000 t3 : ffffffff80f13e48 t4 : ffffffff8000c29c [ 32.097317] t5 : ffffffff8000c29c t6 : ffffffff800dbc54 [ 32.097505] status: 0000000200000120 badaddr: 00aaaaaad77b1170 cause: 000000000000000d [ 32.098011] [<ffffffff801cdb72>] ksys_write+0x6c/0xd6 [ 32.098222] [<ffffffff801cdc06>] sys_write+0x2a/0x38 [ 32.098405] [<ffffffff80003c76>] ret_from_syscall+0x0/0x2 Since the rs1 and rd might be the same one, such as 'jalr 1140(ra)', hence it requires obtaining the target address from rs1 followed by updating rd. Fixes: c22b0bc ("riscv: Add kprobes supported") Signed-off-by: Liao Chang <[email protected]> Reviewed-by: Guo Ren <[email protected]> Link: https://lore.kernel.org/r/[email protected] [Palmer: Pick Guo's cleanup] Signed-off-by: Palmer Dabbelt <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 4e264be ] When a system with E810 with existing VFs gets rebooted the following hang may be observed. Pid 1 is hung in iavf_remove(), part of a network driver: PID: 1 TASK: ffff965400e5a340 CPU: 24 COMMAND: "systemd-shutdow" #0 [ffffaad04005fa50] __schedule at ffffffff8b3239cb #1 [ffffaad04005fae8] schedule at ffffffff8b323e2d #2 [ffffaad04005fb00] schedule_hrtimeout_range_clock at ffffffff8b32cebc #3 [ffffaad04005fb80] usleep_range_state at ffffffff8b32c930 #4 [ffffaad04005fbb0] iavf_remove at ffffffffc12b9b4c [iavf] #5 [ffffaad04005fbf0] pci_device_remove at ffffffff8add7513 #6 [ffffaad04005fc10] device_release_driver_internal at ffffffff8af08baa #7 [ffffaad04005fc40] pci_stop_bus_device at ffffffff8adcc5fc #8 [ffffaad04005fc60] pci_stop_and_remove_bus_device at ffffffff8adcc81e #9 [ffffaad04005fc70] pci_iov_remove_virtfn at ffffffff8adf9429 #10 [ffffaad04005fca8] sriov_disable at ffffffff8adf98e4 #11 [ffffaad04005fcc8] ice_free_vfs at ffffffffc04bb2c8 [ice] #12 [ffffaad04005fd10] ice_remove at ffffffffc04778fe [ice] #13 [ffffaad04005fd38] ice_shutdown at ffffffffc0477946 [ice] #14 [ffffaad04005fd50] pci_device_shutdown at ffffffff8add58f1 #15 [ffffaad04005fd70] device_shutdown at ffffffff8af05386 #16 [ffffaad04005fd98] kernel_restart at ffffffff8a92a870 #17 [ffffaad04005fda8] __do_sys_reboot at ffffffff8a92abd6 #18 [ffffaad04005fee0] do_syscall_64 at ffffffff8b317159 #19 [ffffaad04005ff08] __context_tracking_enter at ffffffff8b31b6fc #20 [ffffaad04005ff18] syscall_exit_to_user_mode at ffffffff8b31b50d #21 [ffffaad04005ff28] do_syscall_64 at ffffffff8b317169 #22 [ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at ffffffff8b40009b RIP: 00007f1baa5c13d7 RSP: 00007fffbcc55a98 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1baa5c13d7 RDX: 0000000001234567 RSI: 0000000028121969 RDI: 00000000fee1dead RBP: 00007fffbcc55ca0 R8: 0000000000000000 R9: 00007fffbcc54e90 R10: 00007fffbcc55050 R11: 0000000000000202 R12: 0000000000000005 R13: 0000000000000000 R14: 00007fffbcc55af0 R15: 0000000000000000 ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b During reboot all drivers PM shutdown callbacks are invoked. In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE. In ice_shutdown() the call chain above is executed, which at some point calls iavf_remove(). However iavf_remove() expects the VF to be in one of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If that's not the case it sleeps forever. So if iavf_shutdown() gets invoked before iavf_remove() the system will hang indefinitely because the adapter is already in state __IAVF_REMOVE. Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE, as we already went through iavf_shutdown(). Fixes: 9745780 ("iavf: Add waiting so the port is initialized in remove") Fixes: a841733 ("iavf: Fix race condition between iavf_shutdown and iavf_remove") Reported-by: Marius Cornea <[email protected]> Signed-off-by: Stefan Assmann <[email protected]> Reviewed-by: Michal Kubiak <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 99d4850 ] Found by leak sanitizer: ``` ==1632594==ERROR: LeakSanitizer: detected memory leaks Direct leak of 21 byte(s) in 1 object(s) allocated from: #0 0x7f2953a7077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439 #1 0x556701d6fbbf in perf_env__read_cpuid util/env.c:369 #2 0x556701d70589 in perf_env__cpuid util/env.c:465 #3 0x55670204bba2 in x86__is_amd_cpu arch/x86/util/env.c:14 #4 0x5567020487a2 in arch__post_evsel_config arch/x86/util/evsel.c:83 #5 0x556701d8f78b in evsel__config util/evsel.c:1366 #6 0x556701ef5872 in evlist__config util/record.c:108 #7 0x556701cd6bcd in test__PERF_RECORD tests/perf-record.c:112 #8 0x556701cacd07 in run_test tests/builtin-test.c:236 #9 0x556701cacfac in test_and_print tests/builtin-test.c:265 #10 0x556701cadddb in __cmd_test tests/builtin-test.c:402 #11 0x556701caf2aa in cmd_test tests/builtin-test.c:559 #12 0x556701d3b557 in run_builtin tools/perf/perf.c:323 #13 0x556701d3bac8 in handle_internal_command tools/perf/perf.c:377 #14 0x556701d3be90 in run_argv tools/perf/perf.c:421 #15 0x556701d3c3f8 in main tools/perf/perf.c:537 #16 0x7f2952a46189 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 SUMMARY: AddressSanitizer: 21 byte(s) leaked in 1 allocation(s). ``` Fixes: f7b58cb ("perf mem/c2c: Add load store event mappings for AMD") Signed-off-by: Ian Rogers <[email protected]> Acked-by: Ravi Bangoria <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 0b0747d upstream. The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 truenas#10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 truenas#11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 truenas#12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 truenas#13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 truenas#14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 truenas#15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 truenas#16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 truenas#17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 truenas#18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 truenas#19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 truenas#20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 truenas#21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 truenas#22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 truenas#23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 truenas#24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 truenas#25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 truenas#26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 truenas#27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 truenas#10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 truenas#11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 truenas#12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 truenas#13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 truenas#14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 truenas#15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 truenas#16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 truenas#17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Cc: [email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

commit 0b0747d upstream. The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Cc: [email protected] Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit a154f5f ] The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f truenas#1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 truenas#2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee truenas#3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 truenas#4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 truenas#5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c truenas#6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] truenas#7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] truenas#8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f truenas#9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 truenas#10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] truenas#11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc truenas#12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] truenas#13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] truenas#14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] truenas#15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] truenas#16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 truenas#17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] truenas#18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] truenas#19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 truenas#20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Mike Christie <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 19ecbe8 ] If komeda_pipeline_unbound_components() returns -EDEADLK, it means that a deadlock happened in the locking context. Currently, komeda is not dealing with the deadlock properly,producing the following output when CONFIG_DEBUG_WW_MUTEX_SLOWPATH is enabled: ------------[ cut here ]------------ [ 26.103984] WARNING: CPU: 2 PID: 345 at drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c:1248 komeda_release_unclaimed_resources+0x13c/0x170 [ 26.117453] Modules linked in: [ 26.120511] CPU: 2 PID: 345 Comm: [email protected] Kdump: loaded Tainted: G W 5.10.110-SE-SDK1.8-dirty truenas#16 [ 26.131374] Hardware name: Siengine Se1000 Evaluation board (DT) [ 26.137379] pstate: 20400009 (nzCv daif +PAN -UAO -TCO BTYPE=--) [ 26.143385] pc : komeda_release_unclaimed_resources+0x13c/0x170 [ 26.149301] lr : komeda_release_unclaimed_resources+0xbc/0x170 [ 26.155130] sp : ffff800017b8b8d0 [ 26.158442] pmr_save: 000000e0 [ 26.161493] x29: ffff800017b8b8d0 x28: ffff000cf2f96200 [ 26.166805] x27: ffff000c8f5a8800 x26: 0000000000000000 [ 26.172116] x25: 0000000000000038 x24: ffff8000116a0140 [ 26.177428] x23: 0000000000000038 x22: ffff000cf2f96200 [ 26.182739] x21: ffff000cfc300300 x20: ffff000c8ab77080 [ 26.188051] x19: 0000000000000003 x18: 0000000000000000 [ 26.193362] x17: 0000000000000000 x16: 0000000000000000 [ 26.198672] x15: b400e638f738ba38 x14: 0000000000000000 [ 26.203983] x13: 0000000106400a00 x12: 0000000000000000 [ 26.209294] x11: 0000000000000000 x10: 0000000000000000 [ 26.214604] x9 : ffff800012f80000 x8 : ffff000ca3308000 [ 26.219915] x7 : 0000000ff3000000 x6 : ffff80001084034c [ 26.225226] x5 : ffff800017b8bc40 x4 : 000000000000000f [ 26.230536] x3 : ffff000ca3308000 x2 : 0000000000000000 [ 26.235847] x1 : 0000000000000000 x0 : ffffffffffffffdd [ 26.241158] Call trace: [ 26.243604] komeda_release_unclaimed_resources+0x13c/0x170 [ 26.249175] komeda_crtc_atomic_check+0x68/0xf0 [ 26.253706] drm_atomic_helper_check_planes+0x138/0x1f4 [ 26.258929] komeda_kms_check+0x284/0x36c [ 26.262939] drm_atomic_check_only+0x40c/0x714 [ 26.267381] drm_atomic_nonblocking_commit+0x1c/0x60 [ 26.272344] drm_mode_atomic_ioctl+0xa3c/0xb8c [ 26.276787] drm_ioctl_kernel+0xc4/0x120 [ 26.280708] drm_ioctl+0x268/0x534 [ 26.284109] __arm64_sys_ioctl+0xa8/0xf0 [ 26.288030] el0_svc_common.constprop.0+0x80/0x240 [ 26.292817] do_el0_svc+0x24/0x90 [ 26.296132] el0_svc+0x20/0x30 [ 26.299185] el0_sync_handler+0xe8/0xf0 [ 26.303018] el0_sync+0x1a4/0x1c0 [ 26.306330] irq event stamp: 0 [ 26.309384] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 26.315650] hardirqs last disabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c [ 26.323825] softirqs last enabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c [ 26.331997] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 26.338261] ---[ end trace 20ae984fa860184a ]--- [ 26.343021] ------------[ cut here ]------------ [ 26.347646] WARNING: CPU: 3 PID: 345 at drivers/gpu/drm/drm_modeset_lock.c:228 drm_modeset_drop_locks+0x84/0x90 [ 26.357727] Modules linked in: [ 26.360783] CPU: 3 PID: 345 Comm: [email protected] Kdump: loaded Tainted: G W 5.10.110-SE-SDK1.8-dirty truenas#16 [ 26.371645] Hardware name: Siengine Se1000 Evaluation board (DT) [ 26.377647] pstate: 20400009 (nzCv daif +PAN -UAO -TCO BTYPE=--) [ 26.383649] pc : drm_modeset_drop_locks+0x84/0x90 [ 26.388351] lr : drm_mode_atomic_ioctl+0x860/0xb8c [ 26.393137] sp : ffff800017b8bb10 [ 26.396447] pmr_save: 000000e0 [ 26.399497] x29: ffff800017b8bb10 x28: 0000000000000001 [ 26.404807] x27: 0000000000000038 x26: 0000000000000002 [ 26.410115] x25: ffff000cecbefa00 x24: ffff000cf2f96200 [ 26.415423] x23: 0000000000000001 x22: 0000000000000018 [ 26.420731] x21: 0000000000000001 x20: ffff800017b8bc10 [ 26.426039] x19: 0000000000000000 x18: 0000000000000000 [ 26.431347] x17: 0000000002e8bf2c x16: 0000000002e94c6b [ 26.436655] x15: 0000000002ea48b9 x14: ffff8000121f0300 [ 26.441963] x13: 0000000002ee2ca8 x12: ffff80001129cae0 [ 26.447272] x11: ffff800012435000 x10: ffff000ed46b5e88 [ 26.452580] x9 : ffff000c9935e600 x8 : 0000000000000000 [ 26.457888] x7 : 000000008020001e x6 : 000000008020001f [ 26.463196] x5 : ffff80001085fbe0 x4 : fffffe0033a59f20 [ 26.468504] x3 : 000000008020001e x2 : 0000000000000000 [ 26.473813] x1 : 0000000000000000 x0 : ffff000c8f596090 [ 26.479122] Call trace: [ 26.481566] drm_modeset_drop_locks+0x84/0x90 [ 26.485918] drm_mode_atomic_ioctl+0x860/0xb8c [ 26.490359] drm_ioctl_kernel+0xc4/0x120 [ 26.494278] drm_ioctl+0x268/0x534 [ 26.497677] __arm64_sys_ioctl+0xa8/0xf0 [ 26.501598] el0_svc_common.constprop.0+0x80/0x240 [ 26.506384] do_el0_svc+0x24/0x90 [ 26.509697] el0_svc+0x20/0x30 [ 26.512748] el0_sync_handler+0xe8/0xf0 [ 26.516580] el0_sync+0x1a4/0x1c0 [ 26.519891] irq event stamp: 0 [ 26.522943] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 26.529207] hardirqs last disabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c [ 26.537379] softirqs last enabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c [ 26.545550] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 26.551812] ---[ end trace 20ae984fa860184b ]--- According to the call trace information,it can be located to be WARN_ON(IS_ERR(c_st)) in the komeda_pipeline_unbound_components function; Then follow the function. komeda_pipeline_unbound_components -> komeda_component_get_state_and_set_user -> komeda_pipeline_get_state_and_set_crtc -> komeda_pipeline_get_state ->drm_atomic_get_private_obj_state -> drm_atomic_get_private_obj_state -> drm_modeset_lock komeda_pipeline_unbound_components -> komeda_component_get_state_and_set_user -> komeda_component_get_state -> drm_atomic_get_private_obj_state -> drm_modeset_lock ret = drm_modeset_lock(&obj->lock, state->acquire_ctx); if (ret) return ERR_PTR(ret); Here it return -EDEADLK. deal with the deadlock as suggested by [1], using the function drm_modeset_backoff(). [1] https://docs.kernel.org/gpu/drm-kms.html?highlight=kms#kms-locking Therefore, handling this problem can be solved by adding return -EDEADLK back to the drm_modeset_backoff processing flow in the drm_mode_atomic_ioctl function. Signed-off-by: baozhu.liu <[email protected]> Signed-off-by: menghui.huang <[email protected]> Reviewed-by: Liviu Dudau <[email protected]> Signed-off-by: Liviu Dudau <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit e3e82fc ] When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 truenas#1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 truenas#2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f truenas#3 [fffffe0000549eb8] do_nmi at ffffffff81079582 truenas#4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- truenas#5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b truenas#6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 truenas#7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 truenas#8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] truenas#9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] truenas#10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] truenas#11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] truenas#12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb truenas#13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 truenas#14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 truenas#15 [ffff88aa841efb88] device_del at ffffffff82179d23 truenas#16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] truenas#17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] truenas#18 [ffff88aa841efde8] process_one_work at ffffffff811c589a truenas#19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff truenas#20 [ffff88aa841eff10] kthread at ffffffff811d87a0 truenas#21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/[email protected] Suggested-by: "Ismail, Mustafa" <[email protected]> Signed-off-by: Shifeng Li <[email protected]> Reviewed-by: Shiraz Saleem <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 19ecbe8 ] If komeda_pipeline_unbound_components() returns -EDEADLK, it means that a deadlock happened in the locking context. Currently, komeda is not dealing with the deadlock properly,producing the following output when CONFIG_DEBUG_WW_MUTEX_SLOWPATH is enabled: ------------[ cut here ]------------ [ 26.103984] WARNING: CPU: 2 PID: 345 at drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c:1248 komeda_release_unclaimed_resources+0x13c/0x170 [ 26.117453] Modules linked in: [ 26.120511] CPU: 2 PID: 345 Comm: [email protected] Kdump: loaded Tainted: G W 5.10.110-SE-SDK1.8-dirty #16 [ 26.131374] Hardware name: Siengine Se1000 Evaluation board (DT) [ 26.137379] pstate: 20400009 (nzCv daif +PAN -UAO -TCO BTYPE=--) [ 26.143385] pc : komeda_release_unclaimed_resources+0x13c/0x170 [ 26.149301] lr : komeda_release_unclaimed_resources+0xbc/0x170 [ 26.155130] sp : ffff800017b8b8d0 [ 26.158442] pmr_save: 000000e0 [ 26.161493] x29: ffff800017b8b8d0 x28: ffff000cf2f96200 [ 26.166805] x27: ffff000c8f5a8800 x26: 0000000000000000 [ 26.172116] x25: 0000000000000038 x24: ffff8000116a0140 [ 26.177428] x23: 0000000000000038 x22: ffff000cf2f96200 [ 26.182739] x21: ffff000cfc300300 x20: ffff000c8ab77080 [ 26.188051] x19: 0000000000000003 x18: 0000000000000000 [ 26.193362] x17: 0000000000000000 x16: 0000000000000000 [ 26.198672] x15: b400e638f738ba38 x14: 0000000000000000 [ 26.203983] x13: 0000000106400a00 x12: 0000000000000000 [ 26.209294] x11: 0000000000000000 x10: 0000000000000000 [ 26.214604] x9 : ffff800012f80000 x8 : ffff000ca3308000 [ 26.219915] x7 : 0000000ff3000000 x6 : ffff80001084034c [ 26.225226] x5 : ffff800017b8bc40 x4 : 000000000000000f [ 26.230536] x3 : ffff000ca3308000 x2 : 0000000000000000 [ 26.235847] x1 : 0000000000000000 x0 : ffffffffffffffdd [ 26.241158] Call trace: [ 26.243604] komeda_release_unclaimed_resources+0x13c/0x170 [ 26.249175] komeda_crtc_atomic_check+0x68/0xf0 [ 26.253706] drm_atomic_helper_check_planes+0x138/0x1f4 [ 26.258929] komeda_kms_check+0x284/0x36c [ 26.262939] drm_atomic_check_only+0x40c/0x714 [ 26.267381] drm_atomic_nonblocking_commit+0x1c/0x60 [ 26.272344] drm_mode_atomic_ioctl+0xa3c/0xb8c [ 26.276787] drm_ioctl_kernel+0xc4/0x120 [ 26.280708] drm_ioctl+0x268/0x534 [ 26.284109] __arm64_sys_ioctl+0xa8/0xf0 [ 26.288030] el0_svc_common.constprop.0+0x80/0x240 [ 26.292817] do_el0_svc+0x24/0x90 [ 26.296132] el0_svc+0x20/0x30 [ 26.299185] el0_sync_handler+0xe8/0xf0 [ 26.303018] el0_sync+0x1a4/0x1c0 [ 26.306330] irq event stamp: 0 [ 26.309384] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 26.315650] hardirqs last disabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c [ 26.323825] softirqs last enabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c [ 26.331997] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 26.338261] ---[ end trace 20ae984fa860184a ]--- [ 26.343021] ------------[ cut here ]------------ [ 26.347646] WARNING: CPU: 3 PID: 345 at drivers/gpu/drm/drm_modeset_lock.c:228 drm_modeset_drop_locks+0x84/0x90 [ 26.357727] Modules linked in: [ 26.360783] CPU: 3 PID: 345 Comm: [email protected] Kdump: loaded Tainted: G W 5.10.110-SE-SDK1.8-dirty #16 [ 26.371645] Hardware name: Siengine Se1000 Evaluation board (DT) [ 26.377647] pstate: 20400009 (nzCv daif +PAN -UAO -TCO BTYPE=--) [ 26.383649] pc : drm_modeset_drop_locks+0x84/0x90 [ 26.388351] lr : drm_mode_atomic_ioctl+0x860/0xb8c [ 26.393137] sp : ffff800017b8bb10 [ 26.396447] pmr_save: 000000e0 [ 26.399497] x29: ffff800017b8bb10 x28: 0000000000000001 [ 26.404807] x27: 0000000000000038 x26: 0000000000000002 [ 26.410115] x25: ffff000cecbefa00 x24: ffff000cf2f96200 [ 26.415423] x23: 0000000000000001 x22: 0000000000000018 [ 26.420731] x21: 0000000000000001 x20: ffff800017b8bc10 [ 26.426039] x19: 0000000000000000 x18: 0000000000000000 [ 26.431347] x17: 0000000002e8bf2c x16: 0000000002e94c6b [ 26.436655] x15: 0000000002ea48b9 x14: ffff8000121f0300 [ 26.441963] x13: 0000000002ee2ca8 x12: ffff80001129cae0 [ 26.447272] x11: ffff800012435000 x10: ffff000ed46b5e88 [ 26.452580] x9 : ffff000c9935e600 x8 : 0000000000000000 [ 26.457888] x7 : 000000008020001e x6 : 000000008020001f [ 26.463196] x5 : ffff80001085fbe0 x4 : fffffe0033a59f20 [ 26.468504] x3 : 000000008020001e x2 : 0000000000000000 [ 26.473813] x1 : 0000000000000000 x0 : ffff000c8f596090 [ 26.479122] Call trace: [ 26.481566] drm_modeset_drop_locks+0x84/0x90 [ 26.485918] drm_mode_atomic_ioctl+0x860/0xb8c [ 26.490359] drm_ioctl_kernel+0xc4/0x120 [ 26.494278] drm_ioctl+0x268/0x534 [ 26.497677] __arm64_sys_ioctl+0xa8/0xf0 [ 26.501598] el0_svc_common.constprop.0+0x80/0x240 [ 26.506384] do_el0_svc+0x24/0x90 [ 26.509697] el0_svc+0x20/0x30 [ 26.512748] el0_sync_handler+0xe8/0xf0 [ 26.516580] el0_sync+0x1a4/0x1c0 [ 26.519891] irq event stamp: 0 [ 26.522943] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 26.529207] hardirqs last disabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c [ 26.537379] softirqs last enabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c [ 26.545550] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 26.551812] ---[ end trace 20ae984fa860184b ]--- According to the call trace information,it can be located to be WARN_ON(IS_ERR(c_st)) in the komeda_pipeline_unbound_components function; Then follow the function. komeda_pipeline_unbound_components -> komeda_component_get_state_and_set_user -> komeda_pipeline_get_state_and_set_crtc -> komeda_pipeline_get_state ->drm_atomic_get_private_obj_state -> drm_atomic_get_private_obj_state -> drm_modeset_lock komeda_pipeline_unbound_components -> komeda_component_get_state_and_set_user -> komeda_component_get_state -> drm_atomic_get_private_obj_state -> drm_modeset_lock ret = drm_modeset_lock(&obj->lock, state->acquire_ctx); if (ret) return ERR_PTR(ret); Here it return -EDEADLK. deal with the deadlock as suggested by [1], using the function drm_modeset_backoff(). [1] https://docs.kernel.org/gpu/drm-kms.html?highlight=kms#kms-locking Therefore, handling this problem can be solved by adding return -EDEADLK back to the drm_modeset_backoff processing flow in the drm_mode_atomic_ioctl function. Signed-off-by: baozhu.liu <[email protected]> Signed-off-by: menghui.huang <[email protected]> Reviewed-by: Liviu Dudau <[email protected]> Signed-off-by: Liviu Dudau <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit e3e82fc ] When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f #3 [fffffe0000549eb8] do_nmi at ffffffff81079582 #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb #13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 #14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 #15 [ffff88aa841efb88] device_del at ffffffff82179d23 #16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] #17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] #18 [ffff88aa841efde8] process_one_work at ffffffff811c589a #19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff #20 [ffff88aa841eff10] kthread at ffffffff811d87a0 #21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/[email protected] Suggested-by: "Ismail, Mustafa" <[email protected]> Signed-off-by: Shifeng Li <[email protected]> Reviewed-by: Shiraz Saleem <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

…alid [ Upstream commit f2f11fc ] If smb2 request from client is invalid, The following kernel oops could happen. The patch e2b76ab: "ksmbd: add support for read compound" leads this issue. When request is invalid, It doesn't set anything in the response buffer. This patch add missing set invalid parameter error response. [ 673.085542] ksmbd: cli req too short, len 184 not 142. cmd:5 mid:109 [ 673.085580] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 673.085591] #PF: supervisor read access in kernel mode [ 673.085600] #PF: error_code(0x0000) - not-present page [ 673.085608] PGD 0 P4D 0 [ 673.085620] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 673.085631] CPU: 3 PID: 1039 Comm: kworker/3:0 Not tainted 6.6.0-rc2-tmt #16 [ 673.085643] Hardware name: AZW U59/U59, BIOS JTKT001 05/05/2022 [ 673.085651] Workqueue: ksmbd-io handle_ksmbd_work [ksmbd] [ 673.085719] RIP: 0010:ksmbd_conn_write+0x68/0xc0 [ksmbd] [ 673.085808] RAX: 0000000000000000 RBX: ffff88811ade4f00 RCX: 0000000000000000 [ 673.085817] RDX: 0000000000000000 RSI: ffff88810c2a9780 RDI: ffff88810c2a9ac0 [ 673.085826] RBP: ffffc900005e3e00 R08: 0000000000000000 R09: 0000000000000000 [ 673.085834] R10: ffffffffa3168160 R11: 63203a64626d736b R12: ffff8881057c8800 [ 673.085842] R13: ffff8881057c8820 R14: ffff8882781b2380 R15: ffff8881057c8800 [ 673.085852] FS: 0000000000000000(0000) GS:ffff888278180000(0000) knlGS:0000000000000000 [ 673.085864] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 673.085872] CR2: 0000000000000000 CR3: 000000015b63c000 CR4: 0000000000350ee0 [ 673.085883] Call Trace: [ 673.085890] <TASK> [ 673.085900] ? show_regs+0x6a/0x80 [ 673.085916] ? __die+0x25/0x70 [ 673.085926] ? page_fault_oops+0x154/0x4b0 [ 673.085938] ? tick_nohz_tick_stopped+0x18/0x50 [ 673.085954] ? __irq_work_queue_local+0xba/0x140 [ 673.085967] ? do_user_addr_fault+0x30f/0x6c0 [ 673.085979] ? exc_page_fault+0x79/0x180 [ 673.085992] ? asm_exc_page_fault+0x27/0x30 [ 673.086009] ? ksmbd_conn_write+0x68/0xc0 [ksmbd] [ 673.086067] ? ksmbd_conn_write+0x46/0xc0 [ksmbd] [ 673.086123] handle_ksmbd_work+0x28d/0x4b0 [ksmbd] [ 673.086177] process_one_work+0x178/0x350 [ 673.086193] ? __pfx_worker_thread+0x10/0x10 [ 673.086202] worker_thread+0x2f3/0x420 [ 673.086210] ? _raw_spin_unlock_irqrestore+0x27/0x50 [ 673.086222] ? __pfx_worker_thread+0x10/0x10 [ 673.086230] kthread+0x103/0x140 [ 673.086242] ? __pfx_kthread+0x10/0x10 [ 673.086253] ret_from_fork+0x39/0x60 [ 673.086263] ? __pfx_kthread+0x10/0x10 [ 673.086274] ret_from_fork_asm+0x1b/0x30 Fixes: e2b76ab ("ksmbd: add support for read compound") Reported-by: Tom Talpey <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 55a8210 ] When processing a packed profile in unpack_profile() described like "profile :ns::samba-dcerpcd /usr/lib*/samba/{,samba/}samba-dcerpcd {...}" a string ":samba-dcerpcd" is unpacked as a fully-qualified name and then passed to aa_splitn_fqname(). aa_splitn_fqname() treats ":samba-dcerpcd" as only containing a namespace. Thus it returns NULL for tmpname, meanwhile tmpns is non-NULL. Later aa_alloc_profile() crashes as the new profile name is NULL now. general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 6 PID: 1657 Comm: apparmor_parser Not tainted 6.7.0-rc2-dirty #16 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 RIP: 0010:strlen+0x1e/0xa0 Call Trace: <TASK> ? strlen+0x1e/0xa0 aa_policy_init+0x1bb/0x230 aa_alloc_profile+0xb1/0x480 unpack_profile+0x3bc/0x4960 aa_unpack+0x309/0x15e0 aa_replace_profiles+0x213/0x33c0 policy_update+0x261/0x370 profile_replace+0x20e/0x2a0 vfs_write+0x2af/0xe00 ksys_write+0x126/0x250 do_syscall_64+0x46/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 </TASK> ---[ end trace 0000000000000000 ]--- RIP: 0010:strlen+0x1e/0xa0 It seems such behaviour of aa_splitn_fqname() is expected and checked in other places where it is called (e.g. aa_remove_profiles). Well, there is an explicit comment "a ns name without a following profile is allowed" inside. AFAICS, nothing can prevent unpacked "name" to be in form like ":samba-dcerpcd" - it is passed from userspace. Deny the whole profile set replacement in such case and inform user with EPROTO and an explaining message. Found by Linux Verification Center (linuxtesting.org). Fixes: 04dc715 ("apparmor: audit policy ns specified in policy load") Signed-off-by: Fedor Pchelkin <[email protected]> Signed-off-by: John Johansen <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit f8bbc07 ] vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 truenas#1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 truenas#2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e truenas#3 [fffffe00003fced0] do_nmi at ffffffff8922660d truenas#4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 truenas#5 [ffffa655314979e8] io_serial_in at ffffffff89792594 truenas#6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 truenas#7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 truenas#8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 truenas#9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 truenas#10 [ffffa65531497ac8] console_unlock at ffffffff89316124 truenas#11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 truenas#12 [ffffa65531497b68] printk at ffffffff89318306 truenas#13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 truenas#14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] truenas#15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] truenas#16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] truenas#17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] truenas#18 [ffffa65531497f10] kthread at ffffffff892d2e72 truenas#19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Acked-by: Jason Wang <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit f8bbc07 ] vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Acked-by: Jason Wang <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

[ Upstream commit 769e6a1 ] ui_browser__show() is capturing the input title that is stack allocated memory in hist_browser__run(). Avoid a use after return by strdup-ing the string. Committer notes: Further explanation from Ian Rogers: My command line using tui is: $ sudo bash -c 'rm /tmp/asan.log*; export ASAN_OPTIONS="log_path=/tmp/asan.log"; /tmp/perf/perf mem record -a sleep 1; /tmp/perf/perf mem report' I then go to the perf annotate view and quit. This triggers the asan error (from the log file): ``` ==1254591==ERROR: AddressSanitizer: stack-use-after-return on address 0x7f2813331920 at pc 0x7f28180 65991 bp 0x7fff0a21c750 sp 0x7fff0a21bf10 READ of size 80 at 0x7f2813331920 thread T0 #0 0x7f2818065990 in __interceptor_strlen ../../../../src/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:461 truenas#1 0x7f2817698251 in SLsmg_write_wrapped_string (/lib/x86_64-linux-gnu/libslang.so.2+0x98251) truenas#2 0x7f28176984b9 in SLsmg_write_nstring (/lib/x86_64-linux-gnu/libslang.so.2+0x984b9) truenas#3 0x55c94045b365 in ui_browser__write_nstring ui/browser.c:60 truenas#4 0x55c94045c558 in __ui_browser__show_title ui/browser.c:266 truenas#5 0x55c94045c776 in ui_browser__show ui/browser.c:288 truenas#6 0x55c94045c06d in ui_browser__handle_resize ui/browser.c:206 truenas#7 0x55c94047979b in do_annotate ui/browsers/hists.c:2458 truenas#8 0x55c94047fb17 in evsel__hists_browse ui/browsers/hists.c:3412 truenas#9 0x55c940480a0c in perf_evsel_menu__run ui/browsers/hists.c:3527 truenas#10 0x55c940481108 in __evlist__tui_browse_hists ui/browsers/hists.c:3613 truenas#11 0x55c9404813f7 in evlist__tui_browse_hists ui/browsers/hists.c:3661 truenas#12 0x55c93ffa253f in report__browse_hists tools/perf/builtin-report.c:671 truenas#13 0x55c93ffa58ca in __cmd_report tools/perf/builtin-report.c:1141 truenas#14 0x55c93ffaf159 in cmd_report tools/perf/builtin-report.c:1805 truenas#15 0x55c94000c05c in report_events tools/perf/builtin-mem.c:374 truenas#16 0x55c94000d96d in cmd_mem tools/perf/builtin-mem.c:516 truenas#17 0x55c9400e44ee in run_builtin tools/perf/perf.c:350 truenas#18 0x55c9400e4a5a in handle_internal_command tools/perf/perf.c:403 truenas#19 0x55c9400e4e22 in run_argv tools/perf/perf.c:447 truenas#20 0x55c9400e53ad in main tools/perf/perf.c:561 truenas#21 0x7f28170456c9 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 truenas#22 0x7f2817045784 in __libc_start_main_impl ../csu/libc-start.c:360 truenas#23 0x55c93ff544c0 in _start (/tmp/perf/perf+0x19a4c0) (BuildId: 84899b0e8c7d3a3eaa67b2eb35e3d8b2f8cd4c93) Address 0x7f2813331920 is located in stack of thread T0 at offset 32 in frame #0 0x55c94046e85e in hist_browser__run ui/browsers/hists.c:746 This frame has 1 object(s): [32, 192) 'title' (line 747) <== Memory access at offset 32 is inside this variable HINT: this may be a false positive if your program uses some custom stack unwind mechanism, swapcontext or vfork ``` hist_browser__run isn't on the stack so the asan error looks legit. There's no clean init/exit on struct ui_browser so I may be trading a use-after-return for a memory leak, but that seems look a good trade anyway. Fixes: 05e8b08 ("perf ui browser: Stop using 'self'") Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ben Gainey <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kan Liang <[email protected]> Cc: K Prateek Nayak <[email protected]> Cc: Li Dong <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Oliver Upton <[email protected]> Cc: Paran Lee <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Sun Haiyong <[email protected]> Cc: Tim Chen <[email protected]> Cc: Yanteng Si <[email protected]> Cc: Yicong Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit 9d274c1 upstream. We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: [email protected] # 6.1+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Omar Sandoval <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 79f18a4 ] When queues are started, netif_napi_add() and napi_enable() are called. If there are 4 queues and only 3 queues are used for the current configuration, only 3 queues' napi should be registered and enabled. The ionic_qcq_enable() checks whether the .poll pointer is not NULL for enabling only the using queue' napi. Unused queues' napi will not be registered by netif_napi_add(), so the .poll pointer indicates NULL. But it couldn't distinguish whether the napi was unregistered or not because netif_napi_del() doesn't reset the .poll pointer to NULL. So, ionic_qcq_enable() calls napi_enable() for the queue, which was unregistered by netif_napi_del(). Reproducer: ethtool -L <interface name> rx 1 tx 1 combined 0 ethtool -L <interface name> rx 0 tx 0 combined 1 ethtool -L <interface name> rx 0 tx 0 combined 4 Splat looks like: kernel BUG at net/core/dev.c:6666! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 1057 Comm: kworker/3:3 Not tainted 6.10.0-rc2+ #16 Workqueue: events ionic_lif_deferred_work [ionic] RIP: 0010:napi_enable+0x3b/0x40 Code: 48 89 c2 48 83 e2 f6 80 b9 61 09 00 00 00 74 0d 48 83 bf 60 01 00 00 00 74 03 80 ce 01 f0 4f RSP: 0018:ffffb6ed83227d48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff97560cda0828 RCX: 0000000000000029 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff97560cda0a28 RBP: ffffb6ed83227d50 R08: 0000000000000400 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: ffff97560ce3c1a0 R14: 0000000000000000 R15: ffff975613ba0a20 FS: 0000000000000000(0000) GS:ffff975d5f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f734ee200 CR3: 0000000103e50000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? die+0x33/0x90 ? do_trap+0xd9/0x100 ? napi_enable+0x3b/0x40 ? do_error_trap+0x83/0xb0 ? napi_enable+0x3b/0x40 ? napi_enable+0x3b/0x40 ? exc_invalid_op+0x4e/0x70 ? napi_enable+0x3b/0x40 ? asm_exc_invalid_op+0x16/0x20 ? napi_enable+0x3b/0x40 ionic_qcq_enable+0xb7/0x180 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_start_queues+0xc4/0x290 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_link_status_check+0x11c/0x170 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_lif_deferred_work+0x129/0x280 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] process_one_work+0x145/0x360 worker_thread+0x2bb/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Fixes: 0f3154e ("ionic: Add Tx and Rx handling") Signed-off-by: Taehee Yoo <[email protected]> Reviewed-by: Brett Creeley <[email protected]> Reviewed-by: Shannon Nelson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

commit be346c1 upstream. The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Joseph Qi <[email protected]> Reviewed-by: Heming Zhao <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Changwei Ge <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>

[ Upstream commit a699781 ] A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] #8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] #9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 #10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 #11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 #12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c #13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b #14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 #15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 #16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f #17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17 ("net: export device speed and duplex via sysfs") Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by: Jamie Bainbridge <[email protected]> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Sasha Levin <[email protected]>

During the migration of Soundwire runtime stream allocation from the Qualcomm Soundwire controller to SoC's soundcard drivers the sdm845 soundcard was forgotten. At this point any playback attempt or audio daemon startup, for instance on sdm845-db845c (Qualcomm RB3 board), will result in stream pointer NULL dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000101ecf000 [0000000000000020] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: ... CPU: 5 UID: 0 PID: 1198 Comm: aplay Not tainted 6.12.0-rc2-qcomlt-arm64-00059-g9d78f315a362-dirty #18 Hardware name: Thundercomm Dragonboard 845c (DT) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : sdw_stream_add_slave+0x44/0x380 [soundwire_bus] lr : sdw_stream_add_slave+0x44/0x380 [soundwire_bus] sp : ffff80008a2035c0 x29: ffff80008a2035c0 x28: ffff80008a203978 x27: 0000000000000000 x26: 00000000000000c0 x25: 0000000000000000 x24: ffff1676025f4800 x23: ffff167600ff1cb8 x22: ffff167600ff1c98 x21: 0000000000000003 x20: ffff167607316000 x19: ffff167604e64e80 x18: 0000000000000000 x17: 0000000000000000 x16: ffffcec265074160 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffff167600ff1cec x5 : ffffcec22cfa2010 x4 : 0000000000000000 x3 : 0000000000000003 x2 : ffff167613f836c0 x1 : 0000000000000000 x0 : ffff16761feb60b8 Call trace: sdw_stream_add_slave+0x44/0x380 [soundwire_bus] wsa881x_hw_params+0x68/0x80 [snd_soc_wsa881x] snd_soc_dai_hw_params+0x3c/0xa4 __soc_pcm_hw_params+0x230/0x660 dpcm_be_dai_hw_params+0x1d0/0x3f8 dpcm_fe_dai_hw_params+0x98/0x268 snd_pcm_hw_params+0x124/0x460 snd_pcm_common_ioctl+0x998/0x16e8 snd_pcm_ioctl+0x34/0x58 __arm64_sys_ioctl+0xac/0xf8 invoke_syscall+0x48/0x104 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xe0 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x190/0x194 Code: aa0403fb f9418400 9100e000 9400102f (f8420f22) ---[ end trace 0000000000000000 ]--- 0000000000006108 <sdw_stream_add_slave>: 6108: d503233f paciasp 610c: a9b97bfd stp x29, x30, [sp, #-112]! 6110: 910003fd mov x29, sp 6114: a90153f3 stp x19, x20, [sp, #16] 6118: a9025bf5 stp x21, x22, [sp, #32] 611c: aa0103f6 mov x22, x1 6120: 2a0303f5 mov w21, w3 6124: a90363f7 stp x23, x24, [sp, #48] 6128: aa0003f8 mov x24, x0 612c: aa0203f7 mov x23, x2 6130: a9046bf9 stp x25, x26, [sp, #64] 6134: aa0403f9 mov x25, x4 <-- x4 copied to x25 6138: a90573fb stp x27, x28, [sp, #80] 613c: aa0403fb mov x27, x4 6140: f9418400 ldr x0, [x0, #776] 6144: 9100e000 add x0, x0, #0x38 6148: 94000000 bl 0 <mutex_lock> 614c: f8420f22 ldr x2, [x25, #32]! <-- offset 0x44 ^^^ This is 0x6108 + offset 0x44 from the beginning of sdw_stream_add_slave() where data abort happens. wsa881x_hw_params() is called with stream = NULL and passes it further in register x4 (5th argument) to sdw_stream_add_slave() without any checks. Value from x4 is copied to x25 and finally it aborts on trying to load a value from address in x25 plus offset 32 (in dec) which corresponds to master_list member in struct sdw_stream_runtime: struct sdw_stream_runtime { const char * name; /* 0 8 */ struct sdw_stream_params params; /* 8 12 */ enum sdw_stream_state state; /* 20 4 */ enum sdw_stream_type type; /* 24 4 */ /* XXX 4 bytes hole, try to pack */ here-> struct list_head master_list; /* 32 16 */ int m_rt_count; /* 48 4 */ /* size: 56, cachelines: 1, members: 6 */ /* sum members: 48, holes: 1, sum holes: 4 */ /* padding: 4 */ /* last cacheline: 56 bytes */ Fix this by adding required calls to qcom_snd_sdw_startup() and sdw_release_stream() to startup and shutdown routines which restores the previous correct behaviour when ->set_stream() method is called to set a valid stream runtime pointer on playback startup. Reproduced and then fix was tested on db845c RB3 board. Reported-by: Dmitry Baryshkov <[email protected]> Cc: [email protected] Fixes: 15c7fab ("ASoC: qcom: Move Soundwire runtime stream alloc to soundcards") Cc: Srinivas Kandagatla <[email protected]> Cc: Dmitry Baryshkov <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Cc: Pierre-Louis Bossart <[email protected]> Signed-off-by: Alexey Klimov <[email protected]> Tested-by: Steev Klimaszewski <[email protected]> # Lenovo Yoga C630 Reviewed-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Srinivas Kandagatla <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>

Skip duplicate actions for CI

350174c

With the default workflow, GitHub Actions are invoked on every push and pull request. This commit adds the functionality to check if a previous successful run is present, then skip re-run for its pull request. Signed-off-by: Umer Saleem <[email protected]>

usaleem-ix requested review from amotin and a user February 4, 2022 19:36

ghost approved these changes Feb 4, 2022

View reviewed changes

amotin approved these changes Feb 6, 2022

View reviewed changes

usaleem-ix merged commit 6bc8e29 into SCALE-v5.10-stable Feb 7, 2022

usaleem-ix deleted the NAS-114638 branch February 7, 2022 08:56

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Skip duplicate actions for CI #16

Skip duplicate actions for CI #16

usaleem-ix commented Feb 4, 2022

ghost left a comment

Skip duplicate actions for CI #16

Skip duplicate actions for CI #16

Conversation

usaleem-ix commented Feb 4, 2022

ghost left a comment

Choose a reason for hiding this comment