| title | description | services | author | ms.service | ms.topic | ms.date | ms.author | ms.custom |
|---|---|---|---|---|---|---|---|---|
Azure ExpressRoute: Add a gateway to a VNet: classic |
Configure a VNet gateway for a classic deployment model VNet using PowerShell for an ExpressRoute configuration. |
expressroute |
duongau |
expressroute |
how-to |
12/06/2019 |
duau |
seodec18 |
[!div class="op_single_selector"]
This article will walk you through the steps to add, resize, and remove a virtual network (VNet) gateway for a pre-existing VNet. The steps for this configuration are specifically for VNets that were created using the classic deployment model and that will be used in an ExpressRoute configuration.
[!INCLUDE expressroute-classic-end-include]
About Azure deployment models
[!INCLUDE vpn-gateway-classic-rm]
Verify that you have installed the Azure PowerShell cmdlets needed for this configuration.
[!INCLUDE classic powershell install instructions]
[!INCLUDE expressroute-gateway-classic-ps]
After you have created the VNet gateway, you can link your VNet to an ExpressRoute circuit. See Link a Virtual Network to an ExpressRoute circuit.