update #1
Merged
update #1
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
…/git/vgupta/arc Pull ARC fixes from Vineet Gupta: - MCIP aka ARconnect fixes for SMP builds [Euginey] - preventive fix for SLC (L2 cache) flushing [Euginey] - Kconfig default fix [Ulf Magnusson] - trailing semicolon fixes [Luis de Bethencourt] - other assorted minor fixes * tag 'arc-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: setup cpu possible mask according to possible-cpus dts property ARC: mcip: update MCIP debug mask when the new cpu came online ARC: mcip: halt GFRC counter when ARC cores halt ARCv2: boot log: fix HS48 release number arc: dts: use 'atmel' as manufacturer for at24 in axs10x_mb ARC: Fix malformed ARC_EMUL_UNALIGNED default ARC: boot log: Fix trailing semicolon ARC: dw2 unwind: Fix trailing semicolon ARC: Enable fatal signals on boot for dev platforms ARCv2: Don't pretend we may set L-bit in STATUS32 with kflag instruction ARCv2: cache: fix slc_entire_op: flush only instead of flush-n-inv
…airlied/linux Pull drm fixes from Dave Airlie: "Pretty much run of the mill drm fixes. amdgpu: - power management fixes - some display fixes - one ppc 32-bit dma fix i915: - two display fixes - three gem fixes sun4i: - display regression fixes nouveau: - display regression fix virtio-gpu: - dumb airlied ioctl fix" * tag 'drm-fixes-for-v4.16-rc4' of git://people.freedesktop.org/~airlied/linux: (25 commits) drm/amdgpu: skip ECC for SRIOV in gmc late_init drm/amd/amdgpu: Correct VRAM width for APUs with GMC9 drm/amdgpu: fix&cleanups for wb_clear drm/amdgpu: Correct sdma_v4 get_wptr(v2) drm/amd/powerplay: fix power over limit on Fiji drm/amdgpu:Fixed wrong emit frame size for enc drm/amdgpu: move WB_FREE to correct place drm/amdgpu: only flush hotplug work without DC drm/amd/display: check for ipp before calling cursor operations drm/i915: Make global seqno known in i915_gem_request_execute tracepoint drm/i915: Clear the in-use marker on execbuf failure drm/i915/cnl: Fix PORT_TX_DW5/7 register address drm/i915/audio: fix check for av_enc_map overflow drm/i915: Fix rsvd2 mask when out-fence is returned virtio-gpu: fix ioctl and expose the fixed status to userspace. drm/sun4i: Protect the TCON pixel clocks drm/sun4i: Enable the output on the pins (tcon0) drm/nouveau: prefer XBGR2101010 for addfb ioctl drm/radeon: insist on 32-bit DMA for Cedar on PPC64/PPC64LE drm/amd/display: VGA black screen from s3 when attached to hook ...
The 'defconfig_list' is a weird attribute. If the '.config' is missing, conf_read_simple() iterates over all visible defaults, then it uses the first one for which fopen() succeeds. config DEFCONFIG_LIST string depends on !UML option defconfig_list default "/lib/modules/$UNAME_RELEASE/.config" default "/etc/kernel-config" default "/boot/config-$UNAME_RELEASE" default "$ARCH_DEFCONFIG" default "arch/$ARCH/defconfig" However, like other symbols, the first visible default is always written out to the .config file. This might be different from what has been actually used. For example, on my machine, the third one "/boot/config-$UNAME_RELEASE" is opened, like follows: $ rm .config $ make oldconfig 2>/dev/null scripts/kconfig/conf --oldconfig Kconfig # # using defaults found in /boot/config-4.4.0-112-generic # * * Restart config... * * * IRQ subsystem * Expose irq internals in debugfs (GENERIC_IRQ_DEBUGFS) [N/y/?] (NEW) However, the resulted .config file contains the first one since it is visible: $ grep CONFIG_DEFCONFIG_LIST .config CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" In order to stop confusing people, prevent this CONFIG option from being written to the .config file. Signed-off-by: Masahiro Yamada <[email protected]> Reviewed-by: Ulf Magnusson <[email protected]>
If CONFIG_USE_BUILTIN_DTB is enabled, but CONFIG_BUILTIN_DTB_SOURCE is empty (for example, allmodconfig), it fails to build, like this: make[2]: *** No rule to make target 'arch/sh/boot/dts/.dtb.o', needed by 'arch/sh/boot/dts/built-in.o'. Stop. Surround obj-y with ifneq ... endif. I replaced $(CONFIG_USE_BUILTIN_DTB) with 'y' since this is always the case from the following code from arch/sh/Makefile: core-$(CONFIG_USE_BUILTIN_DTB) += arch/sh/boot/dts/ Signed-off-by: Masahiro Yamada <[email protected]>
The named choice is not used in the kernel tree, but if it were used, it would not be freed. The intention of the named choice can be seen in the log of commit 5a1aa8a ("kconfig: add named choice group"). Signed-off-by: Masahiro Yamada <[email protected]> Reviewed-by: Ulf Magnusson <[email protected]>
GCC_PLUGINS_CFLAGS is already in the environment, so it is superfluous to add it in commandline of final build of init/. Signed-off-by: Cao jin <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
'--build-id' is passed to $(LD), so it should be tested by 'ld-option'. This seems a kind of misconversion when ld-option was renamed to cc-ldoption. Commit f86fd30 ("kbuild: rename ld-option to cc-ldoption") renamed all instances of 'ld-option' to 'cc-ldoption'. Then, commit 691ef3e ("kbuild: introduce ld-option") re-added 'ld-option' as a new implementation. Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Cao jin <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
The package name is ncurses-devel for Redhat based distros and libncurses-dev for Debian based distros. Signed-off-by: Arvind Prasanna <[email protected]> Acked-by: Randy Dunlap <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
…ailable The subpage_prot syscall is only functional when the system is using the Hash MMU. Since commit 5b2b807 ("powerpc/mm: Invalidate subpage_prot() system call on radix platforms") it returns ENOENT when the Radix MMU is active. Currently this just makes the test fail. Additionally the syscall is not available if the kernel is built with 4K pages, or if CONFIG_PPC_SUBPAGE_PROT=n, in which case it returns ENOSYS because the syscall is missing entirely. So check explicitly for ENOENT and ENOSYS and skip if we see either of those. Signed-off-by: Michael Ellerman <[email protected]>
This patch fixes NULL pointer crash due to active timer running for abort IOCB. From crash dump analysis it was discoverd that get_next_timer_interrupt() encountered a corrupted entry on the timer list. #9 [ffff95e1f6f0fd40] page_fault at ffffffff914fe8f8 [exception RIP: get_next_timer_interrupt+440] RIP: ffffffff90ea3088 RSP: ffff95e1f6f0fdf0 RFLAGS: 00010013 RAX: ffff95e1f6451028 RBX: 000218e2389e5f40 RCX: 00000001232ad600 RDX: 0000000000000001 RSI: ffff95e1f6f0fdf0 RDI: 0000000001232ad6 RBP: ffff95e1f6f0fe40 R8: ffff95e1f6451188 R9: 0000000000000001 R10: 0000000000000016 R11: 0000000000000016 R12: 00000001232ad5f6 R13: ffff95e1f6450000 R14: ffff95e1f6f0fdf8 R15: ffff95e1f6f0fe10 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Looking at the assembly of get_next_timer_interrupt(), address came from %r8 (ffff95e1f6451188) which is pointing to list_head with single entry at ffff95e5ff621178. 0xffffffff90ea307a <get_next_timer_interrupt+426>: mov (%r8),%rdx 0xffffffff90ea307d <get_next_timer_interrupt+429>: cmp %r8,%rdx 0xffffffff90ea3080 <get_next_timer_interrupt+432>: je 0xffffffff90ea30a7 <get_next_timer_interrupt+471> 0xffffffff90ea3082 <get_next_timer_interrupt+434>: nopw 0x0(%rax,%rax,1) 0xffffffff90ea3088 <get_next_timer_interrupt+440>: testb $0x1,0x18(%rdx) crash> rd ffff95e1f6451188 10 ffff95e1f6451188: ffff95e5ff621178 ffff95e5ff621178 x.b.....x.b..... ffff95e1f6451198: ffff95e1f6451198 ffff95e1f6451198 ..E.......E..... ffff95e1f64511a8: ffff95e1f64511a8 ffff95e1f64511a8 ..E.......E..... ffff95e1f64511b8: ffff95e77cf509a0 ffff95e77cf509a0 ...|.......|.... ffff95e1f64511c8: ffff95e1f64511c8 ffff95e1f64511c8 ..E.......E..... crash> rd ffff95e5ff621178 10 ffff95e5ff621178: 0000000000000001 ffff95e15936aa00 ..........6Y.... ffff95e5ff621188: 0000000000000000 00000000ffffffff ................ ffff95e5ff621198: 00000000000000a0 0000000000000010 ................ ffff95e5ff6211a8: ffff95e5ff621198 000000000000000c ..b............. ffff95e5ff6211b8: 00000f5800000000 ffff95e751f8d720 ....X... ..Q.... ffff95e5ff621178 belongs to freed mempool object at ffff95e5ff621080. CACHE NAME OBJSIZE ALLOCATED TOTAL SLABS SSIZE ffff95dc7fd74d00 mnt_cache 384 19785 24948 594 16k SLAB MEMORY NODE TOTAL ALLOCATED FREE ffffdc5dabfd8800 ffff95e5ff620000 1 42 29 13 FREE / [ALLOCATED] ffff95e5ff621080 (cpu 6 cache) Examining the contents of that memory reveals a pointer to a constant string in the driver, "abort\0", which is set by qla24xx_async_abort_cmd(). crash> rd ffffffffc059277c 20 ffffffffc059277c: 6e490074726f6261 0074707572726574 abort.Interrupt. ffffffffc059278c: 00676e696c6c6f50 6920726576697244 Polling.Driver i ffffffffc059279c: 646f6d207325206e 6974736554000a65 n %s mode..Testi ffffffffc05927ac: 636976656420676e 786c252074612065 ng device at %lx ffffffffc05927bc: 6b63656843000a2e 646f727020676e69 ...Checking prod ffffffffc05927cc: 6f20444920746375 0a2e706968632066 uct ID of chip.. ffffffffc05927dc: 5120646e756f4600 204130303232414c .Found QLA2200A ffffffffc05927ec: 43000a2e70696843 20676e696b636568 Chip...Checking ffffffffc05927fc: 65786f626c69616d 6c636e69000a2e73 mailboxes...incl ffffffffc059280c: 756e696c2f656475 616d2d616d642f78 ude/linux/dma-ma crash> struct -ox srb_iocb struct srb_iocb { union { struct {...} logio; struct {...} els_logo; struct {...} tmf; struct {...} fxiocb; struct {...} abt; struct ct_arg ctarg; struct {...} mbx; struct {...} nack; [0x0 ] } u; [0xb8] struct timer_list timer; [0x108] void (*timeout)(void *); } SIZE: 0x110 crash> ! bc ibase=16 obase=10 B8+40 F8 The object is a srb_t, and at offset 0xf8 within that structure (i.e. ffff95e5ff621080 + f8 -> ffff95e5ff621178) is a struct timer_list. Cc: <[email protected]> #4.4+ Fixes: 4440e46 ("[SCSI] qla2xxx: Add IOCB Abort command asynchronous handling.") Signed-off-by: Himanshu Madhani <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
Commit d8630bb ('Serialize session deletion by using work_lock') tries to fixup a deadlock when deleting sessions, but fails to take into account the locking rules. This patch resolves the situation by introducing a separate lock for processing the GNLIST response, and ensures that sess_lock is released before calling qlt_schedule_sess_delete(). Cc: Himanshu Madhani <[email protected]> Cc: Quinn Tran <[email protected]> Fixes: d8630bb ("scsi: qla2xxx: Serialize session deletion by using work_lock") Signed-off-by: Hannes Reinecke <[email protected]> Acked-by: Himanshu Madhani <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
When no loop id is assigned in qla24xx_fcport_handle_login() the login state needs to be ignored; it will get set later on in qla_chk_n2n_b4_login(). Cc: Quinn Tran <[email protected]> Cc: Himanshu Madhani <[email protected]> Fixes: 040036b ("scsi: qla2xxx: Delay loop id allocation at login") Signed-off-by: Hannes Reinecke <[email protected]> Acked-by: Himanshu Madhani <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
The fcport flags FCF_ASYNC_ACTIVE and FCF_ASYNC_SENT are used to throttle the state machine, so we need to ensure to always set and unset them correctly. Not doing so will lead to the state machine getting confused and no login attempt into remote ports. Cc: Quinn Tran <[email protected]> Cc: Himanshu Madhani <[email protected]> Fixes: 3dbec59 ("scsi: qla2xxx: Prevent multiple active discovery commands per session") Signed-off-by: Hannes Reinecke <[email protected]> Acked-by: Himanshu Madhani <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
…r oops Avoid that the recently introduced call_rcu() call in the SCSI core triggers a double call_rcu() call. Reported-by: Natanael Copa <[email protected]> Reported-by: Damien Le Moal <[email protected]> References: https://bugzilla.kernel.org/show_bug.cgi?id=198861 Fixes: 3bd6f43 ("scsi: core: Ensure that the SCSI error handler gets woken up") Signed-off-by: Bart Van Assche <[email protected]> Reviewed-by: Damien Le Moal <[email protected]> Tested-by: Damien Le Moal <[email protected]> Cc: Natanael Copa <[email protected]> Cc: Damien Le Moal <[email protected]> Cc: Alexandre Oliva <[email protected]> Cc: Pavel Tikhomirov <[email protected]> Cc: Hannes Reinecke <[email protected]> Cc: Johannes Thumshirn <[email protected]> Cc: <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
…te() When converting __scsi_error_from_host_byte() to BLK_STS error codes the case DID_OK was forgotten, resulting in it always returning an error. Fixes: 2a842ac ("block: introduce new block status code type") Cc: Doug Gilbert <[email protected]> Signed-off-by: Hannes Reinecke <[email protected]> Reviewed-by: Douglas Gilbert <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
commit a423994 ("scsi: qla2xxx: Add switch command to simplify fabric discovery") introduced regression when it did not consider FC-NVMe code path which broke NVMe LUN discovery. Fixes: a423994 ("scsi: qla2xxx: Add switch command to simplify fabric discovery") Signed-off-by: Darren Trapp <[email protected]> Signed-off-by: Himanshu Madhani <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
BUG: unable to handle kernel NULL pointer dereference at 0000000000000100 [ 985.596918] IP: _raw_spin_lock_bh+0x17/0x30 [ 985.601581] PGD 0 P4D 0 [ 985.604405] Oops: 0002 [#1] SMP : [ 985.704533] CPU: 16 PID: 1156 Comm: qedi_thread/16 Not tainted 4.16.0-rc2 #1 [ 985.712397] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 2.4.3 01/17/2017 [ 985.720747] RIP: 0010:_raw_spin_lock_bh+0x17/0x30 [ 985.725996] RSP: 0018:ffffa4b1c43d3e10 EFLAGS: 00010246 [ 985.731823] RAX: 0000000000000000 RBX: ffff94a31bd03000 RCX: 0000000000000000 [ 985.739783] RDX: 0000000000000001 RSI: ffff94a32fa16938 RDI: 0000000000000100 [ 985.747744] RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000a33 [ 985.755703] R10: 0000000000000000 R11: ffffa4b1c43d3af0 R12: 0000000000000000 [ 985.763662] R13: ffff94a301f40818 R14: 0000000000000000 R15: 000000000000000c [ 985.771622] FS: 0000000000000000(0000) GS:ffff94a32fa00000(0000) knlGS:0000000000000000 [ 985.780649] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 985.787057] CR2: 0000000000000100 CR3: 000000067a009006 CR4: 00000000001606e0 [ 985.795017] Call Trace: [ 985.797747] qedi_fp_process_cqes+0x258/0x980 [qedi] [ 985.803294] qedi_percpu_io_thread+0x10f/0x1b0 [qedi] [ 985.808931] kthread+0xf5/0x130 [ 985.812434] ? qedi_free_uio+0xd0/0xd0 [qedi] [ 985.817298] ? kthread_bind+0x10/0x10 [ 985.821372] ? do_syscall_64+0x6e/0x1a0 Signed-off-by: Manish Rangankar <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
Some required information is not exposed to userspace currently (eg. the PASID), pass this information back, along with other information which is currently communicated via sysfs, which saves some parsing effort in userspace. Signed-off-by: Alastair D'Silva <[email protected]> Acked-by: Andrew Donnellan <[email protected]> Acked-by: Frederic Barrat <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
Signed-off-by: Alastair D'Silva <[email protected]> Acked-by: Andrew Donnellan <[email protected]> Acked-by: Frederic Barrat <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
Setting an interface into a VRF fails with 'RTNETLINK answers: File
exists' if one of its VLAN interfaces is already in the same VRF.
As the VRF is an upper device of the VLAN interface, it is also showing
up as an upper device of the interface itself. The solution is to
restrict this check to devices other than master. As only one master
device can be linked to a device, the check in this case is that the
upper device (VRF) being linked to is not the same as the master device
instead of it not being any one of the upper devices.
The following example shows an interface ens12 (with a VLAN interface
ens12.10) being set into VRF green, which behaves as expected:
# ip link add link ens12 ens12.10 type vlan id 10
# ip link set dev ens12 master vrfgreen
# ip link show dev ens12
3: ens12: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel
master vrfgreen state UP mode DEFAULT group default qlen 1000
link/ether 52:54:00:4c:a0:45 brd ff:ff:ff:ff:ff:ff
But if the VLAN interface has previously been set into the same VRF,
then setting the interface into the VRF fails:
# ip link set dev ens12 nomaster
# ip link set dev ens12.10 master vrfgreen
# ip link show dev ens12.10
39: ens12.10@ens12: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
qdisc noqueue master vrfgreen state UP mode DEFAULT group default
qlen 1000 link/ether 52:54:00:4c:a0:45 brd ff:ff:ff:ff:ff:ff
# ip link set dev ens12 master vrfgreen
RTNETLINK answers: File exists
The workaround is to move the VLAN interface back into the default VRF
beforehand, but it has to be shut first so as to avoid the risk of
traffic leaking from the VRF. This fix avoids needing this workaround.
Signed-off-by: Mike Manning <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
…dest unreachable When ip_error() is called the device is the l3mdev master instead of the original device. So the forwarding check should be on the original one. Changes from v2: - Handle the original device disappearing (per David Ahern) - Minimize the change in code order Changes from v1: - Only need to reset the device on which __in_dev_get_rcu() is done (per David Ahern). Signed-off-by: Stephen Suryaputra <[email protected]> Acked-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
If ethtool_ops->get_fecparam returns an error, pass that error on to the user, rather than ignoring it. Fixes: 1a5f3da ("net: ethtool: add support for forward error correction modes") Signed-off-by: Edward Cree <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Daniel Borkmann says: ==================== pull-request: bpf 2018-02-28 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Add schedule points and reduce the number of loop iterations the test_bpf kernel module is performing in order to not hog the CPU for too long, from Eric. 2) Fix an out of bounds access in tail calls in the ppc64 BPF JIT compiler, from Daniel. 3) Fix a crash on arm64 on unaligned BPF xadd operations that could be triggered via interpreter and JIT, from Daniel. Please not that once you merge net into net-next at some point, there is a minor merge conflict in test_verifier.c since test cases had been added at the end in both trees. Resolution is trivial: keep all the test cases from both trees. ==================== Signed-off-by: David S. Miller <[email protected]>
…handler This fixes several bugs in the radix page fault handler relating to the way large pages in the memory backing the guest were handled. First, the check for large pages only checked for explicit huge pages and missed transparent huge pages. Then the check that the addresses (host virtual vs. guest physical) had appropriate alignment was wrong, meaning that the code never put a large page in the partition scoped radix tree; it was always demoted to a small page. Fixing this exposed bugs in kvmppc_create_pte(). We were never invalidating a 2MB PTE, which meant that if a page was initially faulted in without write permission and the guest then attempted to store to it, we would never update the PTE to have write permission. If we find a valid 2MB PTE in the PMD, we need to clear it and do a TLB invalidation before installing either the new 2MB PTE or a pointer to a page table page. This also corrects an assumption that get_user_pages_fast would set the _PAGE_DIRTY bit if we are writing, which is not true. Instead we mark the page dirty explicitly with set_page_dirty_lock(). This also means we don't need the dirty bit set on the host PTE when providing write access on a read fault. Signed-off-by: Paul Mackerras <[email protected]>
…acking
The current code for initializing the VRMA (virtual real memory area)
for HPT guests requires the page size of the backing memory to be one
of 4kB, 64kB or 16MB. With a radix host we have the possibility that
the backing memory page size can be 2MB or 1GB. In these cases, if the
guest switches to HPT mode, KVM will not initialize the VRMA and the
guest will fail to run.
In fact it is not necessary that the VRMA page size is the same as the
backing memory page size; any VRMA page size less than or equal to the
backing memory page size is acceptable. Therefore we now choose the
largest page size out of the set {4k, 64k, 16M} which is not larger
than the backing memory page size.
Signed-off-by: Paul Mackerras <[email protected]>
Currently exclusive TCON clock lock is never released, which, for example, prevents changing resolution on HDMI. In order to fix that, release clock when disabling TCON. TCON is always disabled first before new mode is set. Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
With the alc289, the Pin 0x1b is Headphone-Mic, so we should assign ALC269_FIXUP_DELL4_MIC_NO_PRESENCE rather than ALC225_FIXUP_DELL1_MIC_NO_PRESENCE to it. And this change is suggested by Kailang of Realtek and is verified on the machine. Fixes: 3f2f7c5 ("ALSA: hda - Fix headset mic detection problem for two Dell machines") Cc: Kailang Yang <[email protected]> Cc: <[email protected]> Signed-off-by: Hui Wang <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
The change to flush_kernel_vmap_range() wasn't sufficient to avoid the SMP stalls. The problem is some drivers call these routines with interrupts disabled. Interrupts need to be enabled for flush_tlb_all() and flush_cache_all() to work. This version adds checks to ensure interrupts are not disabled before calling routines that need IPI interrupts. When interrupts are disabled, we now drop into slower code. The attached change fixes the ordering of cache and TLB flushes in several cases. When we flush the cache using the existing PTE/TLB entries, we need to flush the TLB after doing the cache flush. We don't need to do this when we flush the entire instruction and data caches as these flushes don't use the existing TLB entries. The same is true for tmpalias region flushes. The flush_kernel_vmap_range() and invalidate_kernel_vmap_range() routines have been updated. Secondly, we added a new purge_kernel_dcache_range_asm() routine to pacache.S and use it in invalidate_kernel_vmap_range(). Nominally, purges are faster than flushes as the cache lines don't have to be written back to memory. Hopefully, this is sufficient to resolve the remaining problems due to cache speculation. So far, testing indicates that this is the case. I did work up a patch using tmpalias flushes, but there is a performance hit because we need the physical address for each page, and we also need to sequence access to the tmpalias flush code. This increases the probability of stalls. Signed-off-by: John David Anglin <[email protected]> Cc: [email protected] # 4.9+ Signed-off-by: Helge Deller <[email protected]>
For security reasons do not expose the virtual kernel memory layout to userspace. Signed-off-by: Helge Deller <[email protected]> Suggested-by: Kees Cook <[email protected]> Cc: [email protected] # 4.15 Reviewed-by: Kees Cook <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
May 3, 2018
Add DELAY_INIT quirk to fix the following problem with HP v222w 16GB Mini: usb 1-3: unable to read config index 0 descriptor/start: -110 usb 1-3: can't read configurations, error -110 usb 1-3: can't set config #1, error -110 Signed-off-by: Kamil Lulko <[email protected]> Signed-off-by: Kuppuswamy Sathyanarayanan <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
May 3, 2018
tty_unregister_driver may be called more than 1 time in some hotplug cases,it will cause the kernel oops. This patch checked dbc_tty_driver to make sure it is unregistered only 1 time. [ 175.741404] BUG: unable to handle kernel NULL pointer dereference at 0000000000000034 [ 175.742309] IP: tty_unregister_driver+0x9/0x70 [ 175.743148] PGD 0 P4D 0 [ 175.743981] Oops: 0000 [#1] SMP PTI [ 175.753904] RIP: 0010:tty_unregister_driver+0x9/0x70 [ 175.754817] RSP: 0018:ffffa8ff831d3bb0 EFLAGS: 00010246 [ 175.755753] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 175.756685] RDX: ffff92089c616000 RSI: ffffe64fe1b26080 RDI: 0000000000000000 [ 175.757608] RBP: ffff92086c988230 R08: 000000006c982701 R09: 00000001801e0016 [ 175.758533] R10: ffffa8ff831d3b48 R11: ffff92086c982100 R12: ffff92086c98827c [ 175.759462] R13: ffff92086c988398 R14: 0000000000000060 R15: ffff92089c5e9b40 [ 175.760401] FS: 0000000000000000(0000) GS:ffff9208a0100000(0000) knlGS:0000000000000000 [ 175.761334] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 175.762270] CR2: 0000000000000034 CR3: 000000011800a003 CR4: 00000000003606e0 [ 175.763225] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 175.764164] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 175.765091] Call Trace: [ 175.766014] xhci_dbc_tty_unregister_driver+0x11/0x30 [ 175.766960] xhci_dbc_exit+0x2a/0x40 [ 175.767889] xhci_stop+0x57/0x1c0 [ 175.768824] usb_remove_hcd+0x100/0x250 [ 175.769708] usb_hcd_pci_remove+0x68/0x130 [ 175.770574] pci_device_remove+0x3b/0xc0 [ 175.771435] device_release_driver_internal+0x157/0x230 [ 175.772343] pci_stop_bus_device+0x74/0xa0 [ 175.773205] pci_stop_bus_device+0x2b/0xa0 [ 175.774061] pci_stop_bus_device+0x2b/0xa0 [ 175.774907] pci_stop_bus_device+0x2b/0xa0 [ 175.775741] pci_stop_bus_device+0x2b/0xa0 [ 175.776618] pci_stop_bus_device+0x2b/0xa0 [ 175.777452] pci_stop_bus_device+0x2b/0xa0 [ 175.778273] pci_stop_bus_device+0x2b/0xa0 [ 175.779092] pci_stop_bus_device+0x2b/0xa0 [ 175.779908] pci_stop_bus_device+0x2b/0xa0 [ 175.780750] pci_stop_bus_device+0x2b/0xa0 [ 175.781543] pci_stop_and_remove_bus_device+0xe/0x20 [ 175.782338] pciehp_unconfigure_device+0xb8/0x160 [ 175.783128] pciehp_disable_slot+0x4f/0xd0 [ 175.783920] pciehp_power_thread+0x82/0xa0 [ 175.784766] process_one_work+0x147/0x3c0 [ 175.785564] worker_thread+0x4a/0x440 [ 175.786376] kthread+0xf8/0x130 [ 175.787174] ? rescuer_thread+0x360/0x360 [ 175.787964] ? kthread_associate_blkcg+0x90/0x90 [ 175.788798] ret_from_fork+0x35/0x40 Cc: <[email protected]> # 4.16 Fixes: dfba217 ("usb: xhci: Add DbC support in xHCI driver") Signed-off-by: Zhengjun Xing <[email protected]> Tested-by: Christian Kellner <[email protected]> Reviewed-by: Christian Kellner <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
May 3, 2018
…inux/kernel/git/kvmarm/kvmarm KVM/arm fixes for 4.17, take #1 - PSCI selection API, a leftover from 4.16 - Kick vcpu on active interrupt affinity change - Plug a VMID allocation race on oversubscribed systems - Silence debug messages - Update Christoffer's email address
rahrawat
pushed a commit
that referenced
this pull request
May 3, 2018
Kernel is crashing when user tries to record 'ftrace:function' event with empty filter: # perf record -e ftrace:function --filter="" ls # dmesg BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 Oops: 0000 [#1] SMP PTI ... RIP: 0010:ftrace_profile_set_filter+0x14b/0x2d0 RSP: 0018:ffffa4a7c0da7d20 EFLAGS: 00010246 RAX: ffffa4a7c0da7d64 RBX: 0000000000000000 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000092 RDI: ffff8c48ffc968f0 ... Call Trace: _perf_ioctl+0x54a/0x6b0 ? rcu_all_qs+0x5/0x30 ... After patch: # perf record -e ftrace:function --filter="" ls failed to set filter "" on event ftrace:function with 22 (Invalid argument) Also, if user tries to echo "" > filter, it used to throw an error. This behavior got changed by commit 8076559 ("tracing: Rewrite filter logic to be simpler and faster"). This patch restores the behavior as a side effect: Before patch: # echo "" > filter # After patch: # echo "" > filter bash: echo: write error: Invalid argument # Link: http://lkml.kernel.org/r/[email protected] Fixes: 8076559 ("tracing: Rewrite filter logic to be simpler and faster") Signed-off-by: Ravi Bangoria <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
May 3, 2018
The AFFS filesystem is still in use by m68k community (Link #2), but as there was no code activity and no maintainer, the filesystem appeared on the list of candidates for staging/removal (Link #1). I volunteer to act as a maintainer of AFFS to collect any fixes that might show up and to guard fs/affs/ against another spring cleaning. Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/1613268.lKBQxPXt8J@merkaba CC: Martin Steigerwald <[email protected]> CC: John Paul Adrian Glaubitz <[email protected]> Signed-off-by: David Sterba <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
Dec 20, 2018
The current Cadence QSPI driver caused a kernel panic sporadically when writing to QSPI. The problem was caused by writing more bytes than needed because the QSPI operated on 4 bytes at a time. <snip> [ 11.202044] Unable to handle kernel paging request at virtual address bffd3000 [ 11.209254] pgd = e463054d [ 11.211948] [bffd3000] *pgd=2fffb811, *pte=00000000, *ppte=00000000 [ 11.218202] Internal error: Oops: 7 [#1] SMP ARM [ 11.222797] Modules linked in: [ 11.225844] CPU: 1 PID: 1317 Comm: systemd-hwdb Not tainted 4.17.7-d0c45cd44a8f [ 11.235796] Hardware name: Altera SOCFPGA Arria10 [ 11.240487] PC is at __raw_writesl+0x70/0xd4 [ 11.244741] LR is at cqspi_write+0x1a0/0x2cc </snip> On a page boundary limit the number of bytes copied from the tx buffer to remain within the page. This patch uses a temporary buffer to hold the 4 bytes to write and then copies only the bytes required from the tx buffer. Reported-by: Adrian Amborzewicz <[email protected]> Signed-off-by: Thor Thayer <[email protected]> Signed-off-by: Boris Brezillon <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
Dec 20, 2018
When drm_new_set_master() fails, set is_master to 0, to prevent a possible NULL pointer deref. Here is a problematic flow: we check is_master in drm_is_current_master(), then proceed to call drm_lease_owner() passing master. If we do not restore is_master status when drm_new_set_master() fails, we may have a situation in which is_master will be 1 and master itself, NULL, leading to the deref of a NULL pointer in drm_lease_owner(). This fixes the following OOPS, observed on an ArchLinux running a 4.19.2 kernel: [ 97.804282] BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 [ 97.807224] PGD 0 P4D 0 [ 97.807224] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 97.807224] CPU: 0 PID: 1348 Comm: xfwm4 Tainted: P OE 4.19.2-arch1-1-ARCH #1 [ 97.807224] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./AB350 Pro4, BIOS P5.10 10/16/2018 [ 97.807224] RIP: 0010:drm_lease_owner+0xd/0x20 [drm] [ 97.807224] Code: 83 c4 18 5b 5d c3 b8 ea ff ff ff eb e2 b8 ed ff ff ff eb db e8 b4 ca 68 fb 0f 1f 40 00 0f 1f 44 00 00 48 89 f8 eb 03 48 89 d0 <48> 8b 90 80 00 00 00 48 85 d2 75 f1 c3 66 0f 1f 44 00 00 0f 1f 44 [ 97.807224] RSP: 0018:ffffb8cf08e07bb0 EFLAGS: 00010202 [ 97.807224] RAX: 0000000000000000 RBX: ffff9cf0f2586c00 RCX: ffff9cf0f2586c88 [ 97.807224] RDX: ffff9cf0ddbd8000 RSI: 0000000000000000 RDI: 0000000000000000 [ 97.807224] RBP: ffff9cf1040e9800 R08: 0000000000000000 R09: 0000000000000000 [ 97.807224] R10: ffffdeb30fd5d680 R11: ffffdeb30f5d6808 R12: ffff9cf1040e9888 [ 97.807224] R13: 0000000000000000 R14: dead000000000200 R15: ffff9cf0f2586cc8 [ 97.807224] FS: 00007f4145513180(0000) GS:ffff9cf10ea00000(0000) knlGS:0000000000000000 [ 97.807224] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 97.807224] CR2: 0000000000000080 CR3: 00000003d7548000 CR4: 00000000003406f0 [ 97.807224] Call Trace: [ 97.807224] drm_is_current_master+0x1a/0x30 [drm] [ 97.807224] drm_master_release+0x3e/0x130 [drm] [ 97.807224] drm_file_free.part.0+0x2be/0x2d0 [drm] [ 97.807224] drm_open+0x1ba/0x1e0 [drm] [ 97.807224] drm_stub_open+0xaf/0xe0 [drm] [ 97.807224] chrdev_open+0xa3/0x1b0 [ 97.807224] ? cdev_put.part.0+0x20/0x20 [ 97.807224] do_dentry_open+0x132/0x340 [ 97.807224] path_openat+0x2d1/0x14e0 [ 97.807224] ? mem_cgroup_commit_charge+0x7a/0x520 [ 97.807224] do_filp_open+0x93/0x100 [ 97.807224] ? __check_object_size+0x102/0x189 [ 97.807224] ? _raw_spin_unlock+0x16/0x30 [ 97.807224] do_sys_open+0x186/0x210 [ 97.807224] do_syscall_64+0x5b/0x170 [ 97.807224] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 97.807224] RIP: 0033:0x7f4147b07976 [ 97.807224] Code: 89 54 24 08 e8 7b f4 ff ff 8b 74 24 0c 48 8b 3c 24 41 89 c0 44 8b 54 24 08 b8 01 01 00 00 89 f2 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 77 30 44 89 c7 89 44 24 08 e8 a6 f4 ff ff 8b 44 [ 97.807224] RSP: 002b:00007ffcced96ca0 EFLAGS: 00000293 ORIG_RAX: 0000000000000101 [ 97.807224] RAX: ffffffffffffffda RBX: 00005619d5037f80 RCX: 00007f4147b07976 [ 97.807224] RDX: 0000000000000002 RSI: 00005619d46b969c RDI: 00000000ffffff9c [ 98.040039] RBP: 0000000000000024 R08: 0000000000000000 R09: 0000000000000000 [ 98.040039] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000024 [ 98.040039] R13: 0000000000000012 R14: 00005619d5035950 R15: 0000000000000012 [ 98.040039] Modules linked in: nct6775 hwmon_vid algif_skcipher af_alg nls_iso8859_1 nls_cp437 vfat fat uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common arc4 videodev media snd_usb_audio snd_hda_codec_hdmi snd_usbmidi_lib snd_rawmidi snd_seq_device mousedev input_leds iwlmvm mac80211 snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec edac_mce_amd kvm_amd snd_hda_core kvm iwlwifi snd_hwdep r8169 wmi_bmof cfg80211 snd_pcm irqbypass snd_timer snd libphy soundcore pinctrl_amd rfkill pcspkr sp5100_tco evdev gpio_amdpt k10temp mac_hid i2c_piix4 wmi pcc_cpufreq acpi_cpufreq vboxnetflt(OE) vboxnetadp(OE) vboxpci(OE) vboxdrv(OE) msr sg crypto_user ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 fscrypto uas usb_storage dm_crypt hid_generic usbhid hid [ 98.040039] dm_mod raid1 md_mod sd_mod crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel pcbc ahci libahci aesni_intel aes_x86_64 libata crypto_simd cryptd glue_helper ccp xhci_pci rng_core scsi_mod xhci_hcd nvidia_drm(POE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm agpgart nvidia_uvm(POE) nvidia_modeset(POE) nvidia(POE) ipmi_devintf ipmi_msghandler [ 98.040039] CR2: 0000000000000080 [ 98.040039] ---[ end trace 3b65093b6fe62b2f ]--- [ 98.040039] RIP: 0010:drm_lease_owner+0xd/0x20 [drm] [ 98.040039] Code: 83 c4 18 5b 5d c3 b8 ea ff ff ff eb e2 b8 ed ff ff ff eb db e8 b4 ca 68 fb 0f 1f 40 00 0f 1f 44 00 00 48 89 f8 eb 03 48 89 d0 <48> 8b 90 80 00 00 00 48 85 d2 75 f1 c3 66 0f 1f 44 00 00 0f 1f 44 [ 98.040039] RSP: 0018:ffffb8cf08e07bb0 EFLAGS: 00010202 [ 98.040039] RAX: 0000000000000000 RBX: ffff9cf0f2586c00 RCX: ffff9cf0f2586c88 [ 98.040039] RDX: ffff9cf0ddbd8000 RSI: 0000000000000000 RDI: 0000000000000000 [ 98.040039] RBP: ffff9cf1040e9800 R08: 0000000000000000 R09: 0000000000000000 [ 98.040039] R10: ffffdeb30fd5d680 R11: ffffdeb30f5d6808 R12: ffff9cf1040e9888 [ 98.040039] R13: 0000000000000000 R14: dead000000000200 R15: ffff9cf0f2586cc8 [ 98.040039] FS: 00007f4145513180(0000) GS:ffff9cf10ea00000(0000) knlGS:0000000000000000 [ 98.040039] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 98.040039] CR2: 0000000000000080 CR3: 00000003d7548000 CR4: 00000000003406f0 Signed-off-by: Sergio Correia <[email protected]> Cc: [email protected] Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Sean Paul <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
Dec 20, 2018
coprocessor_flush_all may be called from a context of a thread that is different from the thread being flushed. In that case contents of the cpenable special register may not match ti->cpenable of the target thread, resulting in unhandled coprocessor exception in the kernel context. Set cpenable special register to the ti->cpenable of the target register for the duration of the flush and restore it afterwards. This fixes the following crash caused by coprocessor register inspection in native gdb: (gdb) p/x $w0 Illegal instruction in kernel: sig: 9 [#1] PREEMPT Call Trace: ___might_sleep+0x184/0x1a4 __might_sleep+0x41/0xac exit_signals+0x14/0x218 do_exit+0xc9/0x8b8 die+0x99/0xa0 do_illegal_instruction+0x18/0x6c common_exception+0x77/0x77 coprocessor_flush+0x16/0x3c arch_ptrace+0x46c/0x674 sys_ptrace+0x2ce/0x3b4 system_call+0x54/0x80 common_exception+0x77/0x77 note: gdb[100] exited with preempt_count 1 Killed Cc: [email protected] Signed-off-by: Max Filippov <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
Dec 20, 2018
Reported by syzkaller: BUG: unable to handle kernel NULL pointer dereference at 0000000000000014 PGD 800000040410c067 P4D 800000040410c067 PUD 40410d067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 3 PID: 2567 Comm: poc Tainted: G OE 4.19.0-rc5 torvalds#16 RIP: 0010:kvm_pv_send_ipi+0x94/0x350 [kvm] Call Trace: kvm_emulate_hypercall+0x3cc/0x700 [kvm] handle_vmcall+0xe/0x10 [kvm_intel] vmx_handle_exit+0xc1/0x11b0 [kvm_intel] vcpu_enter_guest+0x9fb/0x1910 [kvm] kvm_arch_vcpu_ioctl_run+0x35c/0x610 [kvm] kvm_vcpu_ioctl+0x3e9/0x6d0 [kvm] do_vfs_ioctl+0xa5/0x690 ksys_ioctl+0x6d/0x80 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x83/0x6e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe The reason is that the apic map has not yet been initialized, the testcase triggers pv_send_ipi interface by vmcall which results in kvm->arch.apic_map is dereferenced. This patch fixes it by checking whether or not apic map is NULL and bailing out immediately if that is the case. Fixes: 4180bf1 (KVM: X86: Implement "send IPI" hypercall) Reported-by: Wei Wu <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Radim Krčmář <[email protected]> Cc: Wei Wu <[email protected]> Signed-off-by: Wanpeng Li <[email protected]> Cc: [email protected] Signed-off-by: Paolo Bonzini <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
Dec 20, 2018
Reported by syzkaller: BUG: unable to handle kernel NULL pointer dereference at 00000000000001c8 PGD 80000003ec4da067 P4D 80000003ec4da067 PUD 3f7bfa067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 5059 Comm: debug Tainted: G OE 4.19.0-rc5 torvalds#16 RIP: 0010:__lock_acquire+0x1a6/0x1990 Call Trace: lock_acquire+0xdb/0x210 _raw_spin_lock+0x38/0x70 kvm_ioapic_scan_entry+0x3e/0x110 [kvm] vcpu_enter_guest+0x167e/0x1910 [kvm] kvm_arch_vcpu_ioctl_run+0x35c/0x610 [kvm] kvm_vcpu_ioctl+0x3e9/0x6d0 [kvm] do_vfs_ioctl+0xa5/0x690 ksys_ioctl+0x6d/0x80 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x83/0x6e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe The reason is that the testcase writes hyperv synic HV_X64_MSR_SINT6 msr and triggers scan ioapic logic to load synic vectors into EOI exit bitmap. However, irqchip is not initialized by this simple testcase, ioapic/apic objects should not be accessed. This can be triggered by the following program: #define _GNU_SOURCE #include <endian.h> #include <stdint.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/syscall.h> #include <sys/types.h> #include <unistd.h> uint64_t r[3] = {0xffffffffffffffff, 0xffffffffffffffff, 0xffffffffffffffff}; int main(void) { syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0); long res = 0; memcpy((void*)0x20000040, "/dev/kvm", 9); res = syscall(__NR_openat, 0xffffffffffffff9c, 0x20000040, 0, 0); if (res != -1) r[0] = res; res = syscall(__NR_ioctl, r[0], 0xae01, 0); if (res != -1) r[1] = res; res = syscall(__NR_ioctl, r[1], 0xae41, 0); if (res != -1) r[2] = res; memcpy( (void*)0x20000080, "\x01\x00\x00\x00\x00\x5b\x61\xbb\x96\x00\x00\x40\x00\x00\x00\x00\x01\x00" "\x08\x00\x00\x00\x00\x00\x0b\x77\xd1\x78\x4d\xd8\x3a\xed\xb1\x5c\x2e\x43" "\xaa\x43\x39\xd6\xff\xf5\xf0\xa8\x98\xf2\x3e\x37\x29\x89\xde\x88\xc6\x33" "\xfc\x2a\xdb\xb7\xe1\x4c\xac\x28\x61\x7b\x9c\xa9\xbc\x0d\xa0\x63\xfe\xfe" "\xe8\x75\xde\xdd\x19\x38\xdc\x34\xf5\xec\x05\xfd\xeb\x5d\xed\x2e\xaf\x22" "\xfa\xab\xb7\xe4\x42\x67\xd0\xaf\x06\x1c\x6a\x35\x67\x10\x55\xcb", 106); syscall(__NR_ioctl, r[2], 0x4008ae89, 0x20000080); syscall(__NR_ioctl, r[2], 0xae80, 0); return 0; } This patch fixes it by bailing out scan ioapic if ioapic is not initialized in kernel. Reported-by: Wei Wu <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Radim Krčmář <[email protected]> Cc: Wei Wu <[email protected]> Signed-off-by: Wanpeng Li <[email protected]> Cc: [email protected] Signed-off-by: Paolo Bonzini <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
Dec 20, 2018
When a PCIe NVMe device is not present, nvme_dev_remove_admin() calls blk_cleanup_queue() on the admin queue, which frees the hctx for that queue. Moments later, on the same path nvme_kill_queues() calls blk_mq_unquiesce_queue() on admin queue and tries to access hctx of it, which leads to following OOPS: Oops: 0000 [#1] SMP PTI RIP: 0010:sbitmap_any_bit_set+0xb/0x40 Call Trace: blk_mq_run_hw_queue+0xd5/0x150 blk_mq_run_hw_queues+0x3a/0x50 nvme_kill_queues+0x26/0x50 nvme_remove_namespaces+0xb2/0xc0 nvme_remove+0x60/0x140 pci_device_remove+0x3b/0xb0 Fixes: cb4bfda ("nvme-pci: fix hot removal during error handling") Signed-off-by: Igor Konopko <[email protected]> Reviewed-by: Keith Busch <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
Dec 20, 2018
The bug is not easily reproducable, as it may occur very infrequently (we had machines with 20minutes heavy downloading before it occurred) However, on a virual machine (VMWare on Windows 10 host) it occurred pretty frequently (1-2 seconds after a speedtest was started) dev->tx_skb mab be freed via dev_kfree_skb_irq on a callback before it is set. This causes the following problems: - double free of the skb or potential memory leak - in dmesg: 'recvmsg bug' and 'recvmsg bug 2' and eventually general protection fault Example dmesg output: [ 134.841986] ------------[ cut here ]------------ [ 134.841987] recvmsg bug: copied 9C24A555 seq 9C24B557 rcvnxt 9C25A6B3 fl 0 [ 134.841993] WARNING: CPU: 7 PID: 2629 at /build/linux-hwe-On9fm7/linux-hwe-4.15.0/net/ipv4/tcp.c:1865 tcp_recvmsg+0x44d/0xab0 [ 134.841994] Modules linked in: ipheth(OE) kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd vmw_balloon intel_rapl_perf joydev input_leds serio_raw vmw_vsock_vmci_transport vsock shpchp i2c_piix4 mac_hid binfmt_misc vmw_vmci parport_pc ppdev lp parport autofs4 vmw_pvscsi vmxnet3 hid_generic usbhid hid vmwgfx ttm drm_kms_helper syscopyarea sysfillrect mptspi mptscsih sysimgblt ahci psmouse fb_sys_fops pata_acpi mptbase libahci e1000 drm scsi_transport_spi [ 134.842046] CPU: 7 PID: 2629 Comm: python Tainted: G W OE 4.15.0-34-generic torvalds#37~16.04.1-Ubuntu [ 134.842046] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 [ 134.842048] RIP: 0010:tcp_recvmsg+0x44d/0xab0 [ 134.842048] RSP: 0018:ffffa6630422bcc8 EFLAGS: 00010286 [ 134.842049] RAX: 0000000000000000 RBX: ffff997616f4f200 RCX: 0000000000000006 [ 134.842049] RDX: 0000000000000007 RSI: 0000000000000082 RDI: ffff9976257d6490 [ 134.842050] RBP: ffffa6630422bd98 R08: 0000000000000001 R09: 000000000004bba4 [ 134.842050] R10: 0000000001e00c6f R11: 000000000004bba4 R12: ffff99760dee3000 [ 134.842051] R13: 0000000000000000 R14: ffff99760dee3514 R15: 0000000000000000 [ 134.842051] FS: 00007fe332347700(0000) GS:ffff9976257c0000(0000) knlGS:0000000000000000 [ 134.842052] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 134.842053] CR2: 0000000001e41000 CR3: 000000020e9b4006 CR4: 00000000003606e0 [ 134.842055] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 134.842055] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 134.842057] Call Trace: [ 134.842060] ? aa_sk_perm+0x53/0x1a0 [ 134.842064] inet_recvmsg+0x51/0xc0 [ 134.842066] sock_recvmsg+0x43/0x50 [ 134.842070] SYSC_recvfrom+0xe4/0x160 [ 134.842072] ? __schedule+0x3de/0x8b0 [ 134.842075] ? ktime_get_ts64+0x4c/0xf0 [ 134.842079] SyS_recvfrom+0xe/0x10 [ 134.842082] do_syscall_64+0x73/0x130 [ 134.842086] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 134.842086] RIP: 0033:0x7fe331f5a81d [ 134.842088] RSP: 002b:00007ffe8da98398 EFLAGS: 00000246 ORIG_RAX: 000000000000002d [ 134.842090] RAX: ffffffffffffffda RBX: ffffffffffffffff RCX: 00007fe331f5a81d [ 134.842094] RDX: 00000000000003fb RSI: 0000000001e00874 RDI: 0000000000000003 [ 134.842095] RBP: 00007fe32f642c70 R08: 0000000000000000 R09: 0000000000000000 [ 134.842097] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe332347698 [ 134.842099] R13: 0000000001b7e0a0 R14: 0000000001e00874 R15: 0000000000000000 [ 134.842103] Code: 24 fd ff ff e9 cc fe ff ff 48 89 d8 41 8b 8c 24 10 05 00 00 44 8b 45 80 48 c7 c7 08 bd 59 8b 48 89 85 68 ff ff ff e8 b3 c4 7d ff <0f> 0b 48 8b 85 68 ff ff ff e9 e9 fe ff ff 41 8b 8c 24 10 05 00 [ 134.842126] ---[ end trace b7138fc08c83147f ]--- [ 134.842144] general protection fault: 0000 [#1] SMP PTI [ 134.842145] Modules linked in: ipheth(OE) kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd vmw_balloon intel_rapl_perf joydev input_leds serio_raw vmw_vsock_vmci_transport vsock shpchp i2c_piix4 mac_hid binfmt_misc vmw_vmci parport_pc ppdev lp parport autofs4 vmw_pvscsi vmxnet3 hid_generic usbhid hid vmwgfx ttm drm_kms_helper syscopyarea sysfillrect mptspi mptscsih sysimgblt ahci psmouse fb_sys_fops pata_acpi mptbase libahci e1000 drm scsi_transport_spi [ 134.842161] CPU: 7 PID: 2629 Comm: python Tainted: G W OE 4.15.0-34-generic torvalds#37~16.04.1-Ubuntu [ 134.842162] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 [ 134.842164] RIP: 0010:tcp_close+0x2c6/0x440 [ 134.842165] RSP: 0018:ffffa6630422bde8 EFLAGS: 00010202 [ 134.842167] RAX: 0000000000000000 RBX: ffff99760dee3000 RCX: 0000000180400034 [ 134.842168] RDX: 5c4afd407207a6c4 RSI: ffffe868495bd300 RDI: ffff997616f4f200 [ 134.842169] RBP: ffffa6630422be08 R08: 0000000016f4d401 R09: 0000000180400034 [ 134.842169] R10: ffffa6630422bd98 R11: 0000000000000000 R12: 000000000000600c [ 134.842170] R13: 0000000000000000 R14: ffff99760dee30c8 R15: ffff9975bd44fe00 [ 134.842171] FS: 00007fe332347700(0000) GS:ffff9976257c0000(0000) knlGS:0000000000000000 [ 134.842173] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 134.842174] CR2: 0000000001e41000 CR3: 000000020e9b4006 CR4: 00000000003606e0 [ 134.842177] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 134.842178] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 134.842179] Call Trace: [ 134.842181] inet_release+0x42/0x70 [ 134.842183] __sock_release+0x42/0xb0 [ 134.842184] sock_close+0x15/0x20 [ 134.842187] __fput+0xea/0x220 [ 134.842189] ____fput+0xe/0x10 [ 134.842191] task_work_run+0x8a/0xb0 [ 134.842193] exit_to_usermode_loop+0xc4/0xd0 [ 134.842195] do_syscall_64+0xf4/0x130 [ 134.842197] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 134.842197] RIP: 0033:0x7fe331f5a560 [ 134.842198] RSP: 002b:00007ffe8da982e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 [ 134.842200] RAX: 0000000000000000 RBX: 00007fe32f642c70 RCX: 00007fe331f5a560 [ 134.842201] RDX: 00000000008f5320 RSI: 0000000001cd4b50 RDI: 0000000000000003 [ 134.842202] RBP: 00007fe32f6500f8 R08: 000000000000003c R09: 00000000009343c0 [ 134.842203] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe32f6500d0 [ 134.842204] R13: 00000000008f5320 R14: 00000000008f5320 R15: 0000000001cd4770 [ 134.842205] Code: c8 00 00 00 45 31 e4 49 39 fe 75 4d eb 50 83 ab d8 00 00 00 01 48 8b 17 48 8b 47 08 48 c7 07 00 00 00 00 48 c7 47 08 00 00 00 00 <48> 89 42 08 48 89 10 0f b6 57 34 8b 47 2c 2b 47 28 83 e2 01 80 [ 134.842226] RIP: tcp_close+0x2c6/0x440 RSP: ffffa6630422bde8 [ 134.842227] ---[ end trace b7138fc08c831480 ]--- The proposed patch eliminates a potential racing condition. Before, usb_submit_urb was called and _after_ that, the skb was attached (dev->tx_skb). So, on a callback it was possible, however unlikely that the skb was freed before it was set. That way (because dev->tx_skb was not set to NULL after it was freed), it could happen that a skb from a earlier transmission was freed a second time (and the skb we should have freed did not get freed at all) Now we free the skb directly in ipheth_tx(). It is not passed to the callback anymore, eliminating the posibility of a double free of the same skb. Depending on the retval of usb_submit_urb() we use dev_kfree_skb_any() respectively dev_consume_skb_any() to free the skb. Signed-off-by: Oliver Zweigle <[email protected]> Signed-off-by: Bernd Eckstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
Dec 20, 2018
Fix a possible NULL pointer dereference in nic_remove routine removing the nicpf module if nic_probe fails. The issue can be triggered with the following reproducer: $rmmod nicvf $rmmod nicpf [ 521.412008] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000014 [ 521.422777] Mem abort info: [ 521.425561] ESR = 0x96000004 [ 521.428624] Exception class = DABT (current EL), IL = 32 bits [ 521.434535] SET = 0, FnV = 0 [ 521.437579] EA = 0, S1PTW = 0 [ 521.440730] Data abort info: [ 521.443603] ISV = 0, ISS = 0x00000004 [ 521.447431] CM = 0, WnR = 0 [ 521.450417] user pgtable: 4k pages, 48-bit VAs, pgdp = 0000000072a3da42 [ 521.457022] [0000000000000014] pgd=0000000000000000 [ 521.461916] Internal error: Oops: 96000004 [#1] SMP [ 521.511801] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018 [ 521.518664] pstate: 80400005 (Nzcv daif +PAN -UAO) [ 521.523451] pc : nic_remove+0x24/0x88 [nicpf] [ 521.527808] lr : pci_device_remove+0x48/0xd8 [ 521.532066] sp : ffff000013433cc0 [ 521.535370] x29: ffff000013433cc0 x28: ffff810f6ac50000 [ 521.540672] x27: 0000000000000000 x26: 0000000000000000 [ 521.545974] x25: 0000000056000000 x24: 0000000000000015 [ 521.551274] x23: ffff8007ff89a110 x22: ffff000001667070 [ 521.556576] x21: ffff8007ffb170b0 x20: ffff8007ffb17000 [ 521.561877] x19: 0000000000000000 x18: 0000000000000025 [ 521.567178] x17: 0000000000000000 x16: 000000000000010ffc33ff98 x8 : 0000000000000000 [ 521.593683] x7 : 0000000000000000 x6 : 0000000000000001 [ 521.598983] x5 : 0000000000000002 x4 : 0000000000000003 [ 521.604284] x3 : ffff8007ffb17184 x2 : ffff8007ffb17184 [ 521.609585] x1 : ffff000001662118 x0 : ffff000008557be0 [ 521.614887] Process rmmod (pid: 1897, stack limit = 0x00000000859535c3) [ 521.621490] Call trace: [ 521.623928] nic_remove+0x24/0x88 [nicpf] [ 521.627927] pci_device_remove+0x48/0xd8 [ 521.631847] device_release_driver_internal+0x1b0/0x248 [ 521.637062] driver_detach+0x50/0xc0 [ 521.640628] bus_remove_driver+0x60/0x100 [ 521.644627] driver_unregister+0x34/0x60 [ 521.648538] pci_unregister_driver+0x24/0xd8 [ 521.652798] nic_cleanup_module+0x14/0x111c [nicpf] [ 521.657672] __arm64_sys_delete_module+0x150/0x218 [ 521.662460] el0_svc_handler+0x94/0x110 [ 521.666287] el0_svc+0x8/0xc [ 521.669160] Code: aa1e03e0 9102c295 d503201f f9404eb3 (b9401660) Fixes: 4863dea ("net: Adding support for Cavium ThunderX network controller") Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
Dec 20, 2018
We see the following lockdep warning: [ 2284.078521] ====================================================== [ 2284.078604] WARNING: possible circular locking dependency detected [ 2284.078604] 4.19.0+ torvalds#42 Tainted: G E [ 2284.078604] ------------------------------------------------------ [ 2284.078604] rmmod/254 is trying to acquire lock: [ 2284.078604] 00000000acd94e28 ((&n->timer)#2){+.-.}, at: del_timer_sync+0x5/0xa0 [ 2284.078604] [ 2284.078604] but task is already holding lock: [ 2284.078604] 00000000f997afc0 (&(&tn->node_list_lock)->rlock){+.-.}, at: tipc_node_stop+0xac/0x190 [tipc] [ 2284.078604] [ 2284.078604] which lock already depends on the new lock. [ 2284.078604] [ 2284.078604] [ 2284.078604] the existing dependency chain (in reverse order) is: [ 2284.078604] [ 2284.078604] -> #1 (&(&tn->node_list_lock)->rlock){+.-.}: [ 2284.078604] tipc_node_timeout+0x20a/0x330 [tipc] [ 2284.078604] call_timer_fn+0xa1/0x280 [ 2284.078604] run_timer_softirq+0x1f2/0x4d0 [ 2284.078604] __do_softirq+0xfc/0x413 [ 2284.078604] irq_exit+0xb5/0xc0 [ 2284.078604] smp_apic_timer_interrupt+0xac/0x210 [ 2284.078604] apic_timer_interrupt+0xf/0x20 [ 2284.078604] default_idle+0x1c/0x140 [ 2284.078604] do_idle+0x1bc/0x280 [ 2284.078604] cpu_startup_entry+0x19/0x20 [ 2284.078604] start_secondary+0x187/0x1c0 [ 2284.078604] secondary_startup_64+0xa4/0xb0 [ 2284.078604] [ 2284.078604] -> #0 ((&n->timer)#2){+.-.}: [ 2284.078604] del_timer_sync+0x34/0xa0 [ 2284.078604] tipc_node_delete+0x1a/0x40 [tipc] [ 2284.078604] tipc_node_stop+0xcb/0x190 [tipc] [ 2284.078604] tipc_net_stop+0x154/0x170 [tipc] [ 2284.078604] tipc_exit_net+0x16/0x30 [tipc] [ 2284.078604] ops_exit_list.isra.8+0x36/0x70 [ 2284.078604] unregister_pernet_operations+0x87/0xd0 [ 2284.078604] unregister_pernet_subsys+0x1d/0x30 [ 2284.078604] tipc_exit+0x11/0x6f2 [tipc] [ 2284.078604] __x64_sys_delete_module+0x1df/0x240 [ 2284.078604] do_syscall_64+0x66/0x460 [ 2284.078604] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 2284.078604] [ 2284.078604] other info that might help us debug this: [ 2284.078604] [ 2284.078604] Possible unsafe locking scenario: [ 2284.078604] [ 2284.078604] CPU0 CPU1 [ 2284.078604] ---- ---- [ 2284.078604] lock(&(&tn->node_list_lock)->rlock); [ 2284.078604] lock((&n->timer)#2); [ 2284.078604] lock(&(&tn->node_list_lock)->rlock); [ 2284.078604] lock((&n->timer)#2); [ 2284.078604] [ 2284.078604] *** DEADLOCK *** [ 2284.078604] [ 2284.078604] 3 locks held by rmmod/254: [ 2284.078604] #0: 000000003368be9b (pernet_ops_rwsem){+.+.}, at: unregister_pernet_subsys+0x15/0x30 [ 2284.078604] #1: 0000000046ed9c86 (rtnl_mutex){+.+.}, at: tipc_net_stop+0x144/0x170 [tipc] [ 2284.078604] #2: 00000000f997afc0 (&(&tn->node_list_lock)->rlock){+.-.}, at: tipc_node_stop+0xac/0x19 [...} The reason is that the node timer handler sometimes needs to delete a node which has been disconnected for too long. To do this, it grabs the lock 'node_list_lock', which may at the same time be held by the generic node cleanup function, tipc_node_stop(), during module removal. Since the latter is calling del_timer_sync() inside the same lock, we have a potential deadlock. We fix this letting the timer cleanup function use spin_trylock() instead of just spin_lock(), and when it fails to grab the lock it just returns so that the timer handler can terminate its execution. This is safe to do, since tipc_node_stop() anyway is about to delete both the timer and the node instance. Fixes: 6a939f3 ("tipc: Auto removal of peer down node instance") Acked-by: Ying Xue <[email protected]> Signed-off-by: Jon Maloy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
Dec 20, 2018
list_for_each_entry_safe() is not safe for deleting entries from the list if the spin lock, which protects it, is released and reacquired during the list iteration. Fix this issue by replacing this construction with a simple check if list is empty and removing the first entry in each iteration. This is almost equivalent to a revert of the commit mentioned in the Fixes: tag. This patch fixes following issue: --->8--- Unable to handle kernel NULL pointer dereference at virtual address 00000104 pgd = (ptrval) [00000104] *pgd=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 84 Comm: kworker/1:1 Not tainted 4.20.0-rc2-next-20181114-00009-g8266b35ec404 torvalds#1061 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) Workqueue: events eth_work PC is at rx_fill+0x60/0xac LR is at _raw_spin_lock_irqsave+0x50/0x5c pc : [<c065fee0>] lr : [<c0a056b8>] psr: 80000093 sp : ee7fbee8 ip : 00000100 fp : 00000000 r10: 006000c0 r9 : c10b0ab0 r8 : ee7eb5c0 r7 : ee7eb614 r6 : ee7eb5ec r5 : 000000dc r4 : ee12ac00 r3 : ee12ac24 r2 : 00000200 r1 : 60000013 r0 : ee7eb5ec Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 6d5dc04a DAC: 00000051 Process kworker/1:1 (pid: 84, stack limit = 0x(ptrval)) Stack: (0xee7fbee8 to 0xee7fc000) ... [<c065fee0>] (rx_fill) from [<c0143b7c>] (process_one_work+0x200/0x738) [<c0143b7c>] (process_one_work) from [<c0144118>] (worker_thread+0x2c/0x4c8) [<c0144118>] (worker_thread) from [<c014a8a4>] (kthread+0x128/0x164) [<c014a8a4>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20) Exception stack(0xee7fbfb0 to 0xee7fbff8) ... ---[ end trace 64480bc835eba7d6 ]--- Fixes: fea14e6 ("usb: gadget: u_ether: use better list accessors") Signed-off-by: Marek Szyprowski <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
Dec 20, 2018
Yonghong Song says: ==================== This patch set added name checking for PTR, ARRAY, VOLATILE, TYPEDEF, CONST, RESTRICT, STRUCT, UNION, ENUM and FWD types. Such a strict name checking makes BTF more sound in the kernel and future BTF-to-header-file converesion ([1]) less fragile. Patch #1 implemented btf_name_valid_identifier() for name checking which will be used in Patch #2. Patch #2 checked name validity for the above mentioned types. Patch #3 fixed two existing test_btf unit tests exposed by the strict name checking. Patch #4 added additional test cases. This patch set is against bpf tree. Patch #1 has been implemented in bpf-next commit Commit 2667a26 ("bpf: btf: Add BTF_KIND_FUNC and BTF_KIND_FUNC_PROTO"), so there is no need to apply this patch to bpf-next. In case this patch is applied to bpf-next, there will be a minor conflict like diff --cc kernel/bpf/btf.c index a09b2f94ab25,93c233ab2db6..000000000000 --- a/kernel/bpf/btf.c +++ b/kernel/bpf/btf.c @@@ -474,7 -451,7 +474,11 @@@ static bool btf_name_valid_identifier(c return !*src; } ++<<<<<<< HEAD +const char *btf_name_by_offset(const struct btf *btf, u32 offset) ++======= + static const char *btf_name_by_offset(const struct btf *btf, u32 offset) ++>>>>>>> fa9566b0847d... bpf: btf: implement btf_name_valid_identifier() { if (!offset) return "(anon)"; Just resolve the conflict by taking the "const char ..." line. Patches #2, #3 and #4 can be applied to bpf-next without conflict. [1]: http://vger.kernel.org/lpc-bpf2018.html#session-2 ==================== Signed-off-by: Alexei Starovoitov <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
Dec 20, 2018
We can concurrently try to open the same sub-channel from 2 paths: path #1: vmbus_onoffer() -> vmbus_process_offer() -> handle_sc_creation(). path #2: storvsc_probe() -> storvsc_connect_to_vsp() -> -> storvsc_channel_init() -> handle_multichannel_storage() -> -> vmbus_are_subchannels_present() -> handle_sc_creation(). They conflict with each other, but it was not an issue before the recent commit ae6935e ("vmbus: split ring buffer allocation from open"), because at the beginning of vmbus_open() we checked newchannel->state so only one path could succeed, and the other would return with -EINVAL. After ae6935e, the failing path frees the channel's ringbuffer by vmbus_free_ring(), and this causes a panic later. Commit ae6935e itself is good, and it just reveals the longstanding race. We can resolve the issue by removing path #2, i.e. removing the second vmbus_are_subchannels_present() in handle_multichannel_storage(). BTW, the comment "Check to see if sub-channels have already been created" in handle_multichannel_storage() is incorrect: when we unload the driver, we first close the sub-channel(s) and then close the primary channel, next the host sends rescind-offer message(s) so primary->sc_list will become empty. This means the first vmbus_are_subchannels_present() in handle_multichannel_storage() is never useful. Fixes: ae6935e ("vmbus: split ring buffer allocation from open") Cc: [email protected] Cc: Long Li <[email protected]> Cc: Stephen Hemminger <[email protected]> Cc: K. Y. Srinivasan <[email protected]> Cc: Haiyang Zhang <[email protected]> Signed-off-by: Dexuan Cui <[email protected]> Signed-off-by: K. Y. Srinivasan <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
Dec 20, 2018
__qdisc_drop_all() accesses skb->prev to get to the tail of the segment-list. With commit 68d2f84 ("net: gro: properly remove skb from list") the skb-list handling has been changed to set skb->next to NULL and set the list-poison on skb->prev. With that change, __qdisc_drop_all() will panic when it tries to dereference skb->prev. Since commit 992cba7 ("net: Add and use skb_list_del_init().") __list_del_entry is used, leaving skb->prev unchanged (thus, pointing to the list-head if it's the first skb of the list). This will make __qdisc_drop_all modify the next-pointer of the list-head and result in a panic later on: [ 34.501053] general protection fault: 0000 [#1] SMP KASAN PTI [ 34.501968] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.20.0-rc2.mptcp torvalds#108 [ 34.502887] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011 [ 34.504074] RIP: 0010:dev_gro_receive+0x343/0x1f90 [ 34.504751] Code: e0 48 c1 e8 03 42 80 3c 30 00 0f 85 4a 1c 00 00 4d 8b 24 24 4c 39 65 d0 0f 84 0a 04 00 00 49 8d 7c 24 38 48 89 f8 48 c1 e8 03 <42> 0f b6 04 30 84 c0 74 08 3c 04 [ 34.507060] RSP: 0018:ffff8883af507930 EFLAGS: 00010202 [ 34.507761] RAX: 0000000000000007 RBX: ffff8883970b2c80 RCX: 1ffff11072e165a6 [ 34.508640] RDX: 1ffff11075867008 RSI: ffff8883ac338040 RDI: 0000000000000038 [ 34.509493] RBP: ffff8883af5079d0 R08: ffff8883970b2d40 R09: 0000000000000062 [ 34.510346] R10: 0000000000000034 R11: 0000000000000000 R12: 0000000000000000 [ 34.511215] R13: 0000000000000000 R14: dffffc0000000000 R15: ffff8883ac338008 [ 34.512082] FS: 0000000000000000(0000) GS:ffff8883af500000(0000) knlGS:0000000000000000 [ 34.513036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 34.513741] CR2: 000055ccc3e9d020 CR3: 00000003abf32000 CR4: 00000000000006e0 [ 34.514593] Call Trace: [ 34.514893] <IRQ> [ 34.515157] napi_gro_receive+0x93/0x150 [ 34.515632] receive_buf+0x893/0x3700 [ 34.516094] ? __netif_receive_skb+0x1f/0x1a0 [ 34.516629] ? virtnet_probe+0x1b40/0x1b40 [ 34.517153] ? __stable_node_chain+0x4d0/0x850 [ 34.517684] ? kfree+0x9a/0x180 [ 34.518067] ? __kasan_slab_free+0x171/0x190 [ 34.518582] ? detach_buf+0x1df/0x650 [ 34.519061] ? lapic_next_event+0x5a/0x90 [ 34.519539] ? virtqueue_get_buf_ctx+0x280/0x7f0 [ 34.520093] virtnet_poll+0x2df/0xd60 [ 34.520533] ? receive_buf+0x3700/0x3700 [ 34.521027] ? qdisc_watchdog_schedule_ns+0xd5/0x140 [ 34.521631] ? htb_dequeue+0x1817/0x25f0 [ 34.522107] ? sch_direct_xmit+0x142/0xf30 [ 34.522595] ? virtqueue_napi_schedule+0x26/0x30 [ 34.523155] net_rx_action+0x2f6/0xc50 [ 34.523601] ? napi_complete_done+0x2f0/0x2f0 [ 34.524126] ? kasan_check_read+0x11/0x20 [ 34.524608] ? _raw_spin_lock+0x7d/0xd0 [ 34.525070] ? _raw_spin_lock_bh+0xd0/0xd0 [ 34.525563] ? kvm_guest_apic_eoi_write+0x6b/0x80 [ 34.526130] ? apic_ack_irq+0x9e/0xe0 [ 34.526567] __do_softirq+0x188/0x4b5 [ 34.527015] irq_exit+0x151/0x180 [ 34.527417] do_IRQ+0xdb/0x150 [ 34.527783] common_interrupt+0xf/0xf [ 34.528223] </IRQ> This patch makes sure that skb->prev is set to NULL when entering netem_enqueue. Cc: Prashant Bhole <[email protected]> Cc: Tyler Hicks <[email protected]> Cc: Eric Dumazet <[email protected]> Fixes: 68d2f84 ("net: gro: properly remove skb from list") Suggested-by: Eric Dumazet <[email protected]> Signed-off-by: Christoph Paasch <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
Dec 20, 2018
It was observed that a process blocked indefintely in __fscache_read_or_alloc_page(), waiting for FSCACHE_COOKIE_LOOKING_UP to be cleared via fscache_wait_for_deferred_lookup(). At this time, ->backing_objects was empty, which would normaly prevent __fscache_read_or_alloc_page() from getting to the point of waiting. This implies that ->backing_objects was cleared *after* __fscache_read_or_alloc_page was was entered. When an object is "killed" and then "dropped", FSCACHE_COOKIE_LOOKING_UP is cleared in fscache_lookup_failure(), then KILL_OBJECT and DROP_OBJECT are "called" and only in DROP_OBJECT is ->backing_objects cleared. This leaves a window where something else can set FSCACHE_COOKIE_LOOKING_UP and __fscache_read_or_alloc_page() can start waiting, before ->backing_objects is cleared There is some uncertainty in this analysis, but it seems to be fit the observations. Adding the wake in this patch will be handled correctly by __fscache_read_or_alloc_page(), as it checks if ->backing_objects is empty again, after waiting. Customer which reported the hang, also report that the hang cannot be reproduced with this fix. The backtrace for the blocked process looked like: PID: 29360 TASK: ffff881ff2ac0f80 CPU: 3 COMMAND: "zsh" #0 [ffff881ff43efbf8] schedule at ffffffff815e56f1 #1 [ffff881ff43efc58] bit_wait at ffffffff815e64ed #2 [ffff881ff43efc68] __wait_on_bit at ffffffff815e61b8 #3 [ffff881ff43efca0] out_of_line_wait_on_bit at ffffffff815e625e #4 [ffff881ff43efd08] fscache_wait_for_deferred_lookup at ffffffffa04f2e8f [fscache] #5 [ffff881ff43efd18] __fscache_read_or_alloc_page at ffffffffa04f2ffe [fscache] #6 [ffff881ff43efd58] __nfs_readpage_from_fscache at ffffffffa0679668 [nfs] #7 [ffff881ff43efd78] nfs_readpage at ffffffffa067092b [nfs] #8 [ffff881ff43efda0] generic_file_read_iter at ffffffff81187a73 #9 [ffff881ff43efe50] nfs_file_read at ffffffffa066544b [nfs] torvalds#10 [ffff881ff43efe70] __vfs_read at ffffffff811fc756 torvalds#11 [ffff881ff43efee8] vfs_read at ffffffff811fccfa torvalds#12 [ffff881ff43eff18] sys_read at ffffffff811fda62 torvalds#13 [ffff881ff43eff50] entry_SYSCALL_64_fastpath at ffffffff815e986e Signed-off-by: NeilBrown <[email protected]> Signed-off-by: David Howells <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
Dec 20, 2018
There are actually two kinds of discard merge: - one is the normal discard merge, just like normal read/write request, and call it single-range discard - another is the multi-range discard, queue_max_discard_segments(rq->q) > 1 For the former case, queue_max_discard_segments(rq->q) is 1, and we should handle this kind of discard merge like the normal read/write request. This patch fixes the following kernel panic issue[1], which is caused by not removing the single-range discard request from elevator queue. Guangwu has one raid discard test case, in which this issue is a bit easier to trigger, and I verified that this patch can fix the kernel panic issue in Guangwu's test case. [1] kernel panic log from Jens's report BUG: unable to handle kernel NULL pointer dereference at 0000000000000148 PGD 0 P4D 0. Oops: 0000 [#1] SMP PTI CPU: 37 PID: 763 Comm: kworker/37:1H Not tainted \ 4.20.0-rc3-00649-ge64d9a554a91-dirty torvalds#14 Hardware name: Wiwynn \ Leopard-Orv2/Leopard-DDR BW, BIOS LBM08 03/03/2017 Workqueue: kblockd \ blk_mq_run_work_fn RIP: \ 0010:blk_mq_get_driver_tag+0x81/0x120 Code: 24 \ 10 48 89 7c 24 20 74 21 83 fa ff 0f 95 c0 48 8b 4c 24 28 65 48 33 0c 25 28 00 00 00 \ 0f 85 96 00 00 00 48 83 c4 30 5b 5d c3 <48> 8b 87 48 01 00 00 8b 40 04 39 43 20 72 37 \ f6 87 b0 00 00 00 02 RSP: 0018:ffffc90004aabd30 EFLAGS: 00010246 \ RAX: 0000000000000003 RBX: ffff888465ea1300 RCX: ffffc90004aabde8 RDX: 00000000ffffffff RSI: ffffc90004aabde8 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff888465ea1348 R09: 0000000000000000 R10: 0000000000001000 R11: 00000000ffffffff R12: ffff888465ea1300 R13: 0000000000000000 R14: ffff888465ea1348 R15: ffff888465d10000 FS: 0000000000000000(0000) GS:ffff88846f9c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000148 CR3: 000000000220a003 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: blk_mq_dispatch_rq_list+0xec/0x480 ? elv_rb_del+0x11/0x30 blk_mq_do_dispatch_sched+0x6e/0xf0 blk_mq_sched_dispatch_requests+0xfa/0x170 __blk_mq_run_hw_queue+0x5f/0xe0 process_one_work+0x154/0x350 worker_thread+0x46/0x3c0 kthread+0xf5/0x130 ? process_one_work+0x350/0x350 ? kthread_destroy_worker+0x50/0x50 ret_from_fork+0x1f/0x30 Modules linked in: sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel \ kvm switchtec irqbypass iTCO_wdt iTCO_vendor_support efivars cdc_ether usbnet mii \ cdc_acm i2c_i801 lpc_ich mfd_core ipmi_si ipmi_devintf ipmi_msghandler acpi_cpufreq \ button sch_fq_codel nfsd nfs_acl lockd grace auth_rpcgss oid_registry sunrpc nvme \ nvme_core fuse sg loop efivarfs autofs4 CR2: 0000000000000148 \ ---[ end trace 340a1fb996df1b9b ]--- RIP: 0010:blk_mq_get_driver_tag+0x81/0x120 Code: 24 10 48 89 7c 24 20 74 21 83 fa ff 0f 95 c0 48 8b 4c 24 28 65 48 33 0c 25 28 \ 00 00 00 0f 85 96 00 00 00 48 83 c4 30 5b 5d c3 <48> 8b 87 48 01 00 00 8b 40 04 39 43 \ 20 72 37 f6 87 b0 00 00 00 02 Fixes: 445251d ("blk-mq: fix discard merge with scheduler attached") Reported-by: Jens Axboe <[email protected]> Cc: Guangwu Zhang <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Jianchao Wang <[email protected]> Signed-off-by: Ming Lei <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
Dec 20, 2018
When we use direct_IO with an NFS backing store, we can trigger a WARNING in __set_page_dirty(), as below, since we're dirtying the page unnecessarily in nfs_direct_read_completion(). To fix, replicate the logic in commit 53cbf3b ("fs: direct-io: don't dirtying pages for ITER_BVEC/ITER_KVEC direct read"). Other filesystems that implement direct_IO handle this; most use blockdev_direct_IO(). ceph and cifs have similar logic. mount 127.0.0.1:/export /nfs dd if=/dev/zero of=/nfs/image bs=1M count=200 losetup --direct-io=on -f /nfs/image mkfs.btrfs /dev/loop0 mount -t btrfs /dev/loop0 /mnt/ kernel: WARNING: CPU: 0 PID: 8067 at fs/buffer.c:580 __set_page_dirty+0xaf/0xd0 kernel: Modules linked in: loop(E) nfsv3(E) rpcsec_gss_krb5(E) nfsv4(E) dns_resolver(E) nfs(E) fscache(E) nfsd(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) fuse(E) tun(E) ip6t_rpfilter(E) ipt_REJECT(E) nf_ kernel: snd_seq(E) snd_seq_device(E) snd_pcm(E) video(E) snd_timer(E) snd(E) soundcore(E) ip_tables(E) xfs(E) libcrc32c(E) sd_mod(E) sr_mod(E) cdrom(E) ata_generic(E) pata_acpi(E) crc32c_intel(E) ahci(E) li kernel: CPU: 0 PID: 8067 Comm: kworker/0:2 Tainted: G E 4.20.0-rc1.master.20181111.ol7.x86_64 #1 kernel: Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 kernel: Workqueue: nfsiod rpc_async_release [sunrpc] kernel: RIP: 0010:__set_page_dirty+0xaf/0xd0 kernel: Code: c3 48 8b 02 f6 c4 04 74 d4 48 89 df e8 ba 05 f7 ff 48 89 c6 eb cb 48 8b 43 08 a8 01 75 1f 48 89 d8 48 8b 00 a8 04 74 02 eb 87 <0f> 0b eb 83 48 83 e8 01 eb 9f 48 83 ea 01 0f 1f 00 eb 8b 48 83 e8 kernel: RSP: 0000:ffffc1c8825b7d78 EFLAGS: 00013046 kernel: RAX: 000fffffc0020089 RBX: fffff2b603308b80 RCX: 0000000000000001 kernel: RDX: 0000000000000001 RSI: ffff9d11478115c8 RDI: ffff9d11478115d0 kernel: RBP: ffffc1c8825b7da0 R08: 0000646f6973666e R09: 8080808080808080 kernel: R10: 0000000000000001 R11: 0000000000000000 R12: ffff9d11478115d0 kernel: R13: ffff9d11478115c8 R14: 0000000000003246 R15: 0000000000000001 kernel: FS: 0000000000000000(0000) GS:ffff9d115ba00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 00007f408686f640 CR3: 0000000104d8e004 CR4: 00000000000606f0 kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 kernel: Call Trace: kernel: __set_page_dirty_buffers+0xb6/0x110 kernel: set_page_dirty+0x52/0xb0 kernel: nfs_direct_read_completion+0xc4/0x120 [nfs] kernel: nfs_pgio_release+0x10/0x20 [nfs] kernel: rpc_free_task+0x30/0x70 [sunrpc] kernel: rpc_async_release+0x12/0x20 [sunrpc] kernel: process_one_work+0x174/0x390 kernel: worker_thread+0x4f/0x3e0 kernel: kthread+0x102/0x140 kernel: ? drain_workqueue+0x130/0x130 kernel: ? kthread_stop+0x110/0x110 kernel: ret_from_fork+0x35/0x40 kernel: ---[ end trace 01341980905412c9 ]--- Signed-off-by: Dave Kleikamp <[email protected]> Signed-off-by: Santosh Shilimkar <[email protected]> [forward-ported to v4.20] Signed-off-by: Calum Mackay <[email protected]> Reviewed-by: Dave Kleikamp <[email protected]> Reviewed-by: Chuck Lever <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
Dec 20, 2018
Frank Schreiner reported, that since kernel 4.18 he faces sysfs-warnings when loading modules on a 32-bit kernel. Here is one such example: sysfs: cannot create duplicate filename '/module/nfs/sections/.text' CPU: 0 PID: 98 Comm: modprobe Not tainted 4.18.0-2-parisc #1 Debian 4.18.10-2 Backtrace: [<1017ce2c>] show_stack+0x3c/0x50 [<107a7210>] dump_stack+0x28/0x38 [<103f900c>] sysfs_warn_dup+0x88/0xac [<103f8b1c>] sysfs_add_file_mode_ns+0x164/0x1d0 [<103f9e70>] internal_create_group+0x11c/0x304 [<103fa0a0>] sysfs_create_group+0x48/0x60 [<1022abe8>] load_module.constprop.35+0x1f9c/0x23b8 [<1022b278>] sys_finit_module+0xd0/0x11c [<101831dc>] syscall_exit+0x0/0x14 This warning gets triggered by the fact, that due to commit 24b6c22 ("parisc: Build kernel without -ffunction-sections") we now get multiple .text sections in the kernel modules for which sysfs_create_group() can't create multiple virtual files. This patch works around the problem by re-enabling the -ffunction-sections compiler option for modules, while keeping it disabled for the non-module kernel code. Reported-by: Frank Scheiner <[email protected]> Fixes: 24b6c22 ("parisc: Build kernel without -ffunction-sections") Cc: <[email protected]> # v4.18+ Signed-off-by: Helge Deller <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
Dec 20, 2018
When vb2_buffer_done is called the buffer is unbound from the
request and put. The media_request_object_put also 'put's the
request reference. If the application has already closed the
request fd, then that means that the request reference at that
point goes to 0 and the whole request is released.
This means that the control handler associated with the request is
also freed and that causes this kernel oops:
[174705.995401] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908
[174705.995411] in_atomic(): 1, irqs_disabled(): 1, pid: 28071, name: vivid-000-vid-o
[174705.995416] 2 locks held by vivid-000-vid-o/28071:
[174705.995420] #0: 000000001ea3a232 (&dev->mutex#3){....}, at: vivid_thread_vid_out+0x3f5/0x550 [vivid]
[174705.995447] #1: 00000000e30a0d1e (&(&q->done_lock)->rlock){....}, at: vb2_buffer_done+0x92/0x1d0 [videobuf2_common]
[174705.995460] Preemption disabled at:
[174705.995461] [<0000000000000000>] (null)
[174705.995472] CPU: 11 PID: 28071 Comm: vivid-000-vid-o Tainted: G W 4.20.0-rc1-test-no torvalds#88
[174705.995476] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017
[174705.995481] Call Trace:
[174705.995500] dump_stack+0x46/0x60
[174705.995512] ___might_sleep.cold.79+0xe1/0xf1
[174705.995523] __mutex_lock+0x50/0x8f0
[174705.995531] ? find_held_lock+0x2d/0x90
[174705.995536] ? find_held_lock+0x2d/0x90
[174705.995542] ? find_held_lock+0x2d/0x90
[174705.995564] ? v4l2_ctrl_handler_free.part.13+0x44/0x1d0 [videodev]
[174705.995576] v4l2_ctrl_handler_free.part.13+0x44/0x1d0 [videodev]
[174705.995590] v4l2_ctrl_request_release+0x1c/0x30 [videodev]
[174705.995600] media_request_clean+0x64/0xe0 [media]
[174705.995609] media_request_release+0x19/0x40 [media]
[174705.995617] vb2_buffer_done+0xef/0x1d0 [videobuf2_common]
[174705.995630] vivid_thread_vid_out+0x2c1/0x550 [vivid]
[174705.995645] ? vivid_stop_generating_vid_cap+0x1c0/0x1c0 [vivid]
[174705.995653] kthread+0x113/0x130
[174705.995659] ? kthread_park+0x80/0x80
[174705.995667] ret_from_fork+0x35/0x40
The vb2_buffer_done function can be called from interrupt context, so
anything that sleeps is not allowed.
The solution is to increment the request refcount when the buffer is
queued and decrement it when the buffer is dequeued. Releasing the
request is fine if that happens from VIDIOC_DQBUF.
Signed-off-by: Hans Verkuil <[email protected]>
Acked-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
Dec 20, 2018
When changing mtu many times with traffic, a bug is triggered: [ 1035.684037] kernel BUG at lib/dynamic_queue_limits.c:26! [ 1035.684042] invalid opcode: 0000 [#1] SMP [ 1035.684049] Modules linked in: loop binfmt_misc 8139cp(OE) macsec tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag tcp_lp fuse uinput xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter devlink ip6_tables iptable_filter sunrpc snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep ppdev snd_seq iosf_mbi crc32_pclmul parport_pc snd_seq_device ghash_clmulni_intel parport snd_pcm aesni_intel joydev lrw snd_timer virtio_balloon sg gf128mul glue_helper ablk_helper cryptd snd soundcore i2c_piix4 pcspkr ip_tables xfs libcrc32c sr_mod sd_mod cdrom crc_t10dif crct10dif_generic ata_generic [ 1035.684102] pata_acpi virtio_console qxl drm_kms_helper syscopyarea sysfillrect sysimgblt floppy fb_sys_fops crct10dif_pclmul crct10dif_common ttm crc32c_intel serio_raw ata_piix drm libata 8139too virtio_pci drm_panel_orientation_quirks virtio_ring virtio mii dm_mirror dm_region_hash dm_log dm_mod [last unloaded: 8139cp] [ 1035.684132] CPU: 9 PID: 25140 Comm: if-mtu-change Kdump: loaded Tainted: G OE ------------ T 3.10.0-957.el7.x86_64 #1 [ 1035.684134] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 1035.684136] task: ffff8f59b1f5a080 ti: ffff8f5a2e32c000 task.ti: ffff8f5a2e32c000 [ 1035.684149] RIP: 0010:[<ffffffffba3a40d0>] [<ffffffffba3a40d0>] dql_completed+0x180/0x190 [ 1035.684162] RSP: 0000:ffff8f5a75483e50 EFLAGS: 00010093 [ 1035.684162] RAX: 00000000000000c2 RBX: ffff8f5a6f91c000 RCX: 0000000000000000 [ 1035.684162] RDX: 0000000000000000 RSI: 0000000000000184 RDI: ffff8f599fea3ec0 [ 1035.684162] RBP: ffff8f5a75483ea8 R08: 00000000000000c2 R09: 0000000000000000 [ 1035.684162] R10: 00000000000616ef R11: ffff8f5a75483b56 R12: ffff8f599fea3e00 [ 1035.684162] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000184 [ 1035.684162] FS: 00007fa8434de740(0000) GS:ffff8f5a75480000(0000) knlGS:0000000000000000 [ 1035.684162] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1035.684162] CR2: 00000000004305d0 CR3: 000000024eb66000 CR4: 00000000001406e0 [ 1035.684162] Call Trace: [ 1035.684162] <IRQ> [ 1035.684162] [<ffffffffc08cbaf8>] ? cp_interrupt+0x478/0x580 [8139cp] [ 1035.684162] [<ffffffffba14a294>] __handle_irq_event_percpu+0x44/0x1c0 [ 1035.684162] [<ffffffffba14a442>] handle_irq_event_percpu+0x32/0x80 [ 1035.684162] [<ffffffffba14a4cc>] handle_irq_event+0x3c/0x60 [ 1035.684162] [<ffffffffba14db29>] handle_fasteoi_irq+0x59/0x110 [ 1035.684162] [<ffffffffba02e554>] handle_irq+0xe4/0x1a0 [ 1035.684162] [<ffffffffba7795dd>] do_IRQ+0x4d/0xf0 [ 1035.684162] [<ffffffffba76b362>] common_interrupt+0x162/0x162 [ 1035.684162] <EOI> [ 1035.684162] [<ffffffffba0c2ae4>] ? __wake_up_bit+0x24/0x70 [ 1035.684162] [<ffffffffba1e46f5>] ? do_set_pte+0xd5/0x120 [ 1035.684162] [<ffffffffba1b64fb>] unlock_page+0x2b/0x30 [ 1035.684162] [<ffffffffba1e4879>] do_read_fault.isra.61+0x139/0x1b0 [ 1035.684162] [<ffffffffba1e9134>] handle_pte_fault+0x2f4/0xd10 [ 1035.684162] [<ffffffffba1ebc6d>] handle_mm_fault+0x39d/0x9b0 [ 1035.684162] [<ffffffffba76f5e3>] __do_page_fault+0x203/0x500 [ 1035.684162] [<ffffffffba76f9c6>] trace_do_page_fault+0x56/0x150 [ 1035.684162] [<ffffffffba76ef42>] do_async_page_fault+0x22/0xf0 [ 1035.684162] [<ffffffffba76b788>] async_page_fault+0x28/0x30 [ 1035.684162] Code: 54 c7 47 54 ff ff ff ff 44 0f 49 ce 48 8b 35 48 2f 9c 00 48 89 77 58 e9 fe fe ff ff 0f 1f 80 00 00 00 00 41 89 d1 e9 ef fe ff ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 55 8d 42 ff 48 [ 1035.684162] RIP [<ffffffffba3a40d0>] dql_completed+0x180/0x190 [ 1035.684162] RSP <ffff8f5a75483e50> It's not the same as in 7fe0ee0 patch described. As 8139cp uses shared irq mode, other device irq will trigger cp_interrupt to execute. cp_change_mtu -> cp_close -> cp_open In cp_close routine just before free_irq(), some interrupt may occur. In my environment, cp_interrupt exectutes and IntrStatus is 0x4, exactly TxOk. That will cause cp_tx to wake device queue. As device queue is started, cp_start_xmit and cp_open will run at same time which will cause kernel BUG. For example: [#] for tx descriptor At start: [#][#][#] num_queued=3 After cp_init_hw->cp_start_hw->netdev_reset_queue: [#][#][#] num_queued=0 When 8139cp starts to work then cp_tx will check num_queued mismatchs the complete_bytes. The patch will check IntrMask before check IntrStatus in cp_interrupt. When 8139cp interrupt is disabled, just return. Signed-off-by: Su Yanjun <[email protected]> Signed-off-by: David S. Miller <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
Dec 20, 2018
Revert commit c223978 "exec: make de_thread() freezable" as requested by Ingo Molnar: "So there's a new regression in v4.20-rc4, my desktop produces this lockdep splat: [ 1772.588771] WARNING: pkexec/4633 still has locks held! [ 1772.588773] 4.20.0-rc4-custom-00213-g93a49841322b #1 Not tainted [ 1772.588775] ------------------------------------ [ 1772.588776] 1 lock held by pkexec/4633: [ 1772.588778] #0: 00000000ed85fbf8 (&sig->cred_guard_mutex){+.+.}, at: prepare_bprm_creds+0x2a/0x70 [ 1772.588786] stack backtrace: [ 1772.588789] CPU: 7 PID: 4633 Comm: pkexec Not tainted 4.20.0-rc4-custom-00213-g93a49841322b #1 [ 1772.588792] Call Trace: [ 1772.588800] dump_stack+0x85/0xcb [ 1772.588803] flush_old_exec+0x116/0x890 [ 1772.588807] ? load_elf_phdrs+0x72/0xb0 [ 1772.588809] load_elf_binary+0x291/0x1620 [ 1772.588815] ? sched_clock+0x5/0x10 [ 1772.588817] ? search_binary_handler+0x6d/0x240 [ 1772.588820] search_binary_handler+0x80/0x240 [ 1772.588823] load_script+0x201/0x220 [ 1772.588825] search_binary_handler+0x80/0x240 [ 1772.588828] __do_execve_file.isra.32+0x7d2/0xa60 [ 1772.588832] ? strncpy_from_user+0x40/0x180 [ 1772.588835] __x64_sys_execve+0x34/0x40 [ 1772.588838] do_syscall_64+0x60/0x1c0 The warning gets triggered by an ancient lockdep check in the freezer: (gdb) list *0xffffffff812ece06 0xffffffff812ece06 is in flush_old_exec (./include/linux/freezer.h:57). 52 * DO NOT ADD ANY NEW CALLERS OF THIS FUNCTION 53 * If try_to_freeze causes a lockdep warning it means the caller may deadlock 54 */ 55 static inline bool try_to_freeze_unsafe(void) 56 { 57 might_sleep(); 58 if (likely(!freezing(current))) 59 return false; 60 return __refrigerator(false); 61 } I reviewed the ->cred_guard_mutex code, and the mutex is held across all of exec() - and we always did this. But there's this recent -rc4 commit: > Chanho Min (1): > exec: make de_thread() freezable c223978: exec: make de_thread() freezable I believe this commit is bogus, you cannot call try_to_freeze() from de_thread(), because it's holding the ->cred_guard_mutex." Reported-by: Ingo Molnar <[email protected]> Tested-by: Ingo Molnar <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
Dec 20, 2018
list_del() leaves the skb->next pointer poisoned, which can then lead to
a crash in e.g. OVS forwarding. For example, setting up an OVS VXLAN
forwarding bridge on sfc as per:
========
$ ovs-vsctl show
5dfd9c47-f04b-4aaa-aa96-4fbb0a522a30
Bridge "br0"
Port "br0"
Interface "br0"
type: internal
Port "enp6s0f0"
Interface "enp6s0f0"
Port "vxlan0"
Interface "vxlan0"
type: vxlan
options: {key="1", local_ip="10.0.0.5", remote_ip="10.0.0.4"}
ovs_version: "2.5.0"
========
(where 10.0.0.5 is an address on enp6s0f1)
and sending traffic across it will lead to the following panic:
========
general protection fault: 0000 [#1] SMP PTI
CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.20.0-rc3-ehc+ torvalds#701
Hardware name: Dell Inc. PowerEdge R710/0M233H, BIOS 6.4.0 07/23/2013
RIP: 0010:dev_hard_start_xmit+0x38/0x200
Code: 53 48 89 fb 48 83 ec 20 48 85 ff 48 89 54 24 08 48 89 4c 24 18 0f 84 ab 01 00 00 48 8d 86 90 00 00 00 48 89 f5 48 89 44 24 10 <4c> 8b 33 48 c7 03 00 00 00 00 48 8b 05 c7 d1 b3 00 4d 85 f6 0f 95
RSP: 0018:ffff888627b437e0 EFLAGS: 00010202
RAX: 0000000000000000 RBX: dead000000000100 RCX: ffff88862279c000
RDX: ffff888614a342c0 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff888618a88000 R08: 0000000000000001 R09: 00000000000003e8
R10: 0000000000000000 R11: ffff888614a34140 R12: 0000000000000000
R13: 0000000000000062 R14: dead000000000100 R15: ffff888616430000
FS: 0000000000000000(0000) GS:ffff888627b40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6d2bc6d000 CR3: 000000000200a000 CR4: 00000000000006e0
Call Trace:
<IRQ>
__dev_queue_xmit+0x623/0x870
? masked_flow_lookup+0xf7/0x220 [openvswitch]
? ep_poll_callback+0x101/0x310
do_execute_actions+0xaba/0xaf0 [openvswitch]
? __wake_up_common+0x8a/0x150
? __wake_up_common_lock+0x87/0xc0
? queue_userspace_packet+0x31c/0x5b0 [openvswitch]
ovs_execute_actions+0x47/0x120 [openvswitch]
ovs_dp_process_packet+0x7d/0x110 [openvswitch]
ovs_vport_receive+0x6e/0xd0 [openvswitch]
? dst_alloc+0x64/0x90
? rt_dst_alloc+0x50/0xd0
? ip_route_input_slow+0x19a/0x9a0
? __udp_enqueue_schedule_skb+0x198/0x1b0
? __udp4_lib_rcv+0x856/0xa30
? __udp4_lib_rcv+0x856/0xa30
? cpumask_next_and+0x19/0x20
? find_busiest_group+0x12d/0xcd0
netdev_frame_hook+0xce/0x150 [openvswitch]
__netif_receive_skb_core+0x205/0xae0
__netif_receive_skb_list_core+0x11e/0x220
netif_receive_skb_list+0x203/0x460
? __efx_rx_packet+0x335/0x5e0 [sfc]
efx_poll+0x182/0x320 [sfc]
net_rx_action+0x294/0x3c0
__do_softirq+0xca/0x297
irq_exit+0xa6/0xb0
do_IRQ+0x54/0xd0
common_interrupt+0xf/0xf
</IRQ>
========
So, in all listified-receive handling, instead pull skbs off the lists with
skb_list_del_init().
Fixes: 9af86f9 ("net: core: fix use-after-free in __netif_receive_skb_list_core")
Fixes: 7da517a ("net: core: Another step of skb receive list processing")
Fixes: a4ca8b7 ("net: ipv4: fix drop handling in ip_list_rcv() and ip_list_rcv_finish()")
Fixes: d8269e2 ("net: ipv6: listify ipv6_rcv() and ip6_rcv_finish()")
Signed-off-by: Edward Cree <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
Dec 20, 2018
Function graph tracing recurses into itself when stackleak is enabled, causing the ftrace graph selftest to run for up to 90 seconds and trigger the softlockup watchdog. Breakpoint 2, ftrace_graph_caller () at ../arch/arm64/kernel/entry-ftrace.S:200 200 mcount_get_lr_addr x0 // pointer to function's saved lr (gdb) bt \#0 ftrace_graph_caller () at ../arch/arm64/kernel/entry-ftrace.S:200 \#1 0xffffff80081d5280 in ftrace_caller () at ../arch/arm64/kernel/entry-ftrace.S:153 \#2 0xffffff8008555484 in stackleak_track_stack () at ../kernel/stackleak.c:106 \#3 0xffffff8008421ff8 in ftrace_ops_test (ops=0xffffff8009eaa840 <graph_ops>, ip=18446743524091297036, regs=<optimized out>) at ../kernel/trace/ftrace.c:1507 \#4 0xffffff8008428770 in __ftrace_ops_list_func (regs=<optimized out>, ignored=<optimized out>, parent_ip=<optimized out>, ip=<optimized out>) at ../kernel/trace/ftrace.c:6286 \#5 ftrace_ops_no_ops (ip=18446743524091297036, parent_ip=18446743524091242824) at ../kernel/trace/ftrace.c:6321 \#6 0xffffff80081d5280 in ftrace_caller () at ../arch/arm64/kernel/entry-ftrace.S:153 \#7 0xffffff800832fd10 in irq_find_mapping (domain=0xffffffc03fc4bc80, hwirq=27) at ../kernel/irq/irqdomain.c:876 \#8 0xffffff800832294c in __handle_domain_irq (domain=0xffffffc03fc4bc80, hwirq=27, lookup=true, regs=0xffffff800814b840) at ../kernel/irq/irqdesc.c:650 \#9 0xffffff80081d52b4 in ftrace_graph_caller () at ../arch/arm64/kernel/entry-ftrace.S:205 Rework so we mark stackleak_track_stack as notrace Co-developed-by: Arnd Bergmann <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Anders Roxell <[email protected]> Acked-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Kees Cook <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
Dec 20, 2018
Ido Schimmel says: ==================== mlxsw: Various fixes Patches #1 and #2 fix two VxLAN related issues. The first patch removes warnings that can currently be triggered from user space. Second patch avoids leaking a FID in an error path. Patch #3 fixes a too strict check that causes certain host routes not to be promoted to perform GRE decapsulation in hardware. Last patch avoids a use-after-free when deleting a VLAN device via an ioctl when it is enslaved to a bridge. I have a patchset for net-next that reworks this code and makes the driver more robust. ==================== Signed-off-by: David S. Miller <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
Dec 20, 2018
Since commit 3b8c9f1 ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings"), a call to flush_icache_range() will use an IPI to cross-call other online CPUs so that any stale instructions are flushed from their pipelines. This triggers a WARN during the hibernation resume path, where flush_icache_range() is called with interrupts disabled and is therefore prone to deadlock: | Disabling non-boot CPUs ... | CPU1: shutdown | psci: CPU1 killed. | CPU2: shutdown | psci: CPU2 killed. | CPU3: shutdown | psci: CPU3 killed. | WARNING: CPU: 0 PID: 1 at ../kernel/smp.c:416 smp_call_function_many+0xd4/0x350 | Modules linked in: | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.20.0-rc4 #1 Since all secondary CPUs have been taken offline prior to invalidating the I-cache, there's actually no need for an IPI and we can simply call __flush_icache_range() instead. Cc: <[email protected]> Fixes: 3b8c9f1 ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings") Reported-by: Kunihiko Hayashi <[email protected]> Tested-by: Kunihiko Hayashi <[email protected]> Tested-by: James Morse <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Catalin Marinas <[email protected]>
rahrawat
pushed a commit
that referenced
this pull request
Dec 20, 2018
Even if we send an IPv6 packet without options, MAX_HEADER might not be enough to account for the additional headroom required by alignment of hardware headers. On a configuration without HYPERV_NET, WLAN, AX25, and with IPV6_TUNNEL, sending short SCTP packets over IPv4 over L2TP over IPv6, we start with 100 bytes of allocated headroom in sctp_packet_transmit(), end up with 54 bytes after l2tp_xmit_skb(), and 14 bytes in ip6_finish_output2(). Those would be enough to append our 14 bytes header, but we're going to align that to 16 bytes, and write 2 bytes out of the allocated slab in neigh_hh_output(). KASan says: [ 264.967848] ================================================================== [ 264.967861] BUG: KASAN: slab-out-of-bounds in ip6_finish_output2+0x1aec/0x1c70 [ 264.967866] Write of size 16 at addr 000000006af1c7fe by task netperf/6201 [ 264.967870] [ 264.967876] CPU: 0 PID: 6201 Comm: netperf Not tainted 4.20.0-rc4+ #1 [ 264.967881] Hardware name: IBM 2827 H43 400 (z/VM 6.4.0) [ 264.967887] Call Trace: [ 264.967896] ([<00000000001347d6>] show_stack+0x56/0xa0) [ 264.967903] [<00000000017e379c>] dump_stack+0x23c/0x290 [ 264.967912] [<00000000007bc594>] print_address_description+0xf4/0x290 [ 264.967919] [<00000000007bc8fc>] kasan_report+0x13c/0x240 [ 264.967927] [<000000000162f5e4>] ip6_finish_output2+0x1aec/0x1c70 [ 264.967935] [<000000000163f890>] ip6_finish_output+0x430/0x7f0 [ 264.967943] [<000000000163fe44>] ip6_output+0x1f4/0x580 [ 264.967953] [<000000000163882a>] ip6_xmit+0xfea/0x1ce8 [ 264.967963] [<00000000017396e2>] inet6_csk_xmit+0x282/0x3f8 [ 264.968033] [<000003ff805fb0ba>] l2tp_xmit_skb+0xe02/0x13e0 [l2tp_core] [ 264.968037] [<000003ff80631192>] l2tp_eth_dev_xmit+0xda/0x150 [l2tp_eth] [ 264.968041] [<0000000001220020>] dev_hard_start_xmit+0x268/0x928 [ 264.968069] [<0000000001330e8e>] sch_direct_xmit+0x7ae/0x1350 [ 264.968071] [<000000000122359c>] __dev_queue_xmit+0x2b7c/0x3478 [ 264.968075] [<00000000013d2862>] ip_finish_output2+0xce2/0x11a0 [ 264.968078] [<00000000013d9b14>] ip_finish_output+0x56c/0x8c8 [ 264.968081] [<00000000013ddd1e>] ip_output+0x226/0x4c0 [ 264.968083] [<00000000013dbd6c>] __ip_queue_xmit+0x894/0x1938 [ 264.968100] [<000003ff80bc3a5c>] sctp_packet_transmit+0x29d4/0x3648 [sctp] [ 264.968116] [<000003ff80b7bf68>] sctp_outq_flush_ctrl.constprop.5+0x8d0/0xe50 [sctp] [ 264.968131] [<000003ff80b7c716>] sctp_outq_flush+0x22e/0x7d8 [sctp] [ 264.968146] [<000003ff80b35c68>] sctp_cmd_interpreter.isra.16+0x530/0x6800 [sctp] [ 264.968161] [<000003ff80b3410a>] sctp_do_sm+0x222/0x648 [sctp] [ 264.968177] [<000003ff80bbddac>] sctp_primitive_ASSOCIATE+0xbc/0xf8 [sctp] [ 264.968192] [<000003ff80b93328>] __sctp_connect+0x830/0xc20 [sctp] [ 264.968208] [<000003ff80bb11ce>] sctp_inet_connect+0x2e6/0x378 [sctp] [ 264.968212] [<0000000001197942>] __sys_connect+0x21a/0x450 [ 264.968215] [<000000000119aff8>] sys_socketcall+0x3d0/0xb08 [ 264.968218] [<000000000184ea7a>] system_call+0x2a2/0x2c0 [...] Just like ip_finish_output2() does for IPv4, check that we have enough headroom in ip6_xmit(), and reallocate it if we don't. This issue is older than git history. Reported-by: Jianlin Shi <[email protected]> Signed-off-by: Stefano Brivio <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
check abt timer null pointer