Datadog Puppet Module

This module installs the Datadog Agent and sends Puppet reports to Datadog.

Setup

Requirements

The Datadog Puppet module supports Linux and Windows and is compatible with Puppet >= 4.6.x or Puppet Enterprise version >= 2016.4. For detailed information on compatibility, check the module page on Puppet Forge.

Installation

Install the datadog_agent Puppet module in your Puppet master's module path:

puppet module install datadog-datadog_agent

Note: For CentOS/RHEL versions <7.0 and for Ubuntu < 15.04, specify the service provider as upstart:

class{ 'datadog_agent':
    service_provider => 'upstart'
  }

Upgrading

• By default Datadog Agent v7.x is installed. To use an earlier Agent version, change the setting agent_major_version.
• agent5_enable is no longer used, as it has been replaced by agent_major_version.
• agent6_extra_options has been renamed to agent_extra_options since it now applies to both Agent v6 and v7.
• agent6_log_file has been renamed to agent_log_file since it now applies to both Agent v6 and v7.
• agent5_repo_uri and agent6_repo_uri become agent_repo_uri for all Agent versions.
• conf_dir and conf6_dir become conf_dir for all Agent versions.
• The repository file created on Linux is now named datadog for all Agent versions instead of datadog5/datadog6.

Configuration

Once the datadog_agent module is installed on your puppetserver/puppetmaster (or on a masterless host), follow these configuration steps:

1. Obtain your Datadog API key.

2. Specify the module to install the Datadog Agent on your nodes.

   include datadog_agent
   

   Or assign this module using the Puppet style Parameterized class:

   class { 'datadog_agent':
       api_key => "<YOUR_DD_API_KEY>",
   }
   

3. On your puppetserver, enable reporting:

   class { 'datadog_agent':
       api_key            => "<YOUR_DD_API_KEY>",
       puppet_run_reports => true,
   }
   

   • To support reporting, your Puppet master needs the dogapi gem installed by running the Puppet Agent on your master with this configuration or installing it manually with gem. You may need to restart your puppetserver service after installing the dogapi gem.
   • puppetserver_gem is defined as a module dependency. It is installed automatically when the module is installed.

4. (Optional) Include integrations to use with the Agent, for example:

   include 'datadog_agent::integrations::mongo'
   

   If an integration does not have a manifest with a dedicated class, you can still add a configuration for it. Below is an example for the ntp check:

   class { 'datadog_agent':
       api_key      => "<YOUR_DD_API_KEY>",
       integrations => {
           "ntp" => {
               init_config => {},
               instances => [{
                   offset_threshold => 30,
               }],
           },
       },
   }
   

Integration versions

To install and pin specific integration versions, specify an integration and version number by using datadog_agent::install_integration. This uses the datadog-agent integration command to ensure a specific integration is installed or uninstalled, for example:

datadog_agent::install_integration { "mongo-1.9":
    ensure => present,
    integration_name => 'datadog-mongo',
    version => '1.9.0',
}

ensure has two options:

• present (default)
• absent (removes a previously pinned version of an integration)

Reporting

Ensure the dogapi gem is available on your system.

To enable reporting of changes to your Datadog timeline, enable the report processor on your Puppet master and reporting for your clients. The clients send a run report after each check-in back to the master.

Set the puppet_run_reports option to true in the node configuration manifest for your master:

class { "datadog-agent":
    api_key => "<YOUR_DD_API_KEY>",
    puppet_run_reports => true
    # ...
}

The Puppet configuration file is located in /etc/puppetlabs/puppet/puppet.conf.

Add these configuration options to the appropriate location:

[main]
# No modification needed to this section
# ...

[master]
# Enable reporting to Datadog
reports=datadog_reports
# If you use other reports, add datadog_reports to the end,
# for example: reports=store,log,datadog_reports
# ...

[agent]
# ...
pluginsync=true
report=true

On all of your Puppet client nodes, add the following in the same location:

[agent]
# ...
report=true

Troubleshooting

If you see the following error, ensure reports=datadog_reports is defined in [master], not [main].

err: Could not send report:
Error 400 on SERVER: Could not autoload datadog_reports:
Class Datadog_reports is already defined in Puppet::Reports

Step-by-step

This is the minimal set of modifications to get started.

1. Edit /etc/puppetlabs/puppet/puppet.conf to add the Puppet Agent:

   [master]
   report = true
   reports = datadog_reports
   pluginsync = true
   
   [agent]
   report = true
   pluginsync = true

2. Edit /etc/puppetlabs/code/environments/production/manifests/10_nodes.pp to configure your Agent:

   node "default" {
       class { "datadog_agent":
           api_key => "<YOUR_DD_API_KEY>",
       }
   }
   node "puppetmaster" {
       class { "datadog_agent":
           api_key            => "<YOUR_DD_API_KEY>",
           puppet_run_reports => true
       }
   }
   

   Note: For older versions of Puppet, edit /etc/puppet/manifests/nodes.pp.

3. Run the Puppet Agent:

   sudo systemctl restart puppetserver
   sudo puppet agent --onetime --no-daemonize --no-splay --verbose

   Example response:

   info: Retrieving plugin
   info: Caching catalog for alq-linux.dev.datadoghq.com
   info: Applying configuration version '1333470114'
   notice: Finished catalog run in 0.81 seconds
   

4. Verify your Puppet data is in Datadog by searching for sources:puppet in the Event Stream.

Masterless Puppet

1. The Datadog module and its dependencies have to be installed on all nodes running masterless.

2. Add this to each node's site.pp file:

   class { "datadog_agent":
       api_key            => "<YOUR_DD_API_KEY>",
       puppet_run_reports => true
   }
   

3. Configure reports in the [main] section of puppet.conf:

   [main]
   reports=datadog_reports
   

4. Run puppet in masterless configuration:

   puppet apply --modulepath <path_to_modules> <path_to_site.pp>

Client settings

Tagging client nodes

The Datadog Agent configuration file is recreated from the template every Puppet run. If you need to tag your nodes, add an array entry in Hiera:

datadog_agent::tags:
- 'keyname:value'
- 'anotherkey:%{factname}'

Configuration variables

These variables can be set in the datadog_agent class to control settings in the Agent:

variable name	description
agent_major_version	The version of the Agent to install: either 5, 6 or 7 (default: 7).
agent_version	Lets you pin a specific minor version of the Agent to install, for example: 1:7.16.0-1. Leave empty to install the latest version.
collect_ec2_tags	Collect an instance's custom EC2 tags as Agent tags by using true.
collect_instance_metadata	Collect an instance's EC2 metadata as Agent tags by using true.
datadog_site	The Datadog site to report to. Defaults to datadoghq.com, set to datadoghq.eu to report to the EU site (Agent v6 and v7 only).
dd_url	The Datadog intake server URL. You are unlikely to need to change this. Overrides datadog_site
host	Overrides the node's host name.
local_tags	An array of <KEY:VALUE> strings that are set as tags for the node.
non_local_traffic	Allow other nodes to relay their traffic through this node.
apm_enabled	A boolean to enable the APM Agent (defaults to false).
apm_analyzed_spans	A hash to add APM events for trace search & analytics (defaults to undef), for example: { 'app|rails.request' => 1, 'service-name|operation-name' => 0.8 }
process_enabled	A boolean to enable the process Agent (defaults to false).
scrub_args	A boolean to enable the process cmdline scrubbing (defaults to true).
custom_sensitive_words	An array to add more words beyond the default ones used by the scrubbing feature (defaults to []).
logs_enabled	A boolean to enable the logs Agent (defaults to false).
container_collect_all	A boolean to enable logs collection for all containers.
agent_extra_options1	A hash to provide additional configuration options (Agent v6 and v7 only).
hostname_extraction_regex2	A regex used to extract the hostname captured group to report the run in Datadog instead of reporting the Puppet nodename, for example: '^(?<hostname>.*\.datadoghq\.com)(\.i-\w{8}\..*)?$'

(1) agent_extra_options is used to provide a fine grain control of additional Agent v6/v7 config options. A deep merge is performed that may override options provided in the datadog_agent class parameters.

(2) hostname_extraction_regex is useful when the Puppet module and the Datadog Agent are reporting different host names for the same host in the infrastructure list.