vsense voltage regulator from STi-v3.10 branch #8

waby38b · 2023-05-10T19:37:49Z

Here a link to vsense voltage regulator driver ported from STi-3.10 branch

Minor cleanup to match actual Linux framework

devm_xxx()
DEFINE_SIMPLE_DEV_PM_OPS
module_platform_driver

Each physical partition can provide multiple services each with UUID. Each such service can be presented as logical partition with a unique combination of VM ID and UUID. The number of distinct UUID in a system will be less than or equal to the number of logical partitions. However, currently it fails to register more than one logical partition or service within a physical partition as the device name contains only VM ID while both VM ID and UUID are maintained in the partition information. The kernel complains with the below message: | sysfs: cannot create duplicate filename '/devices/arm-ffa-8001' | CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc7 #8 | Hardware name: FVP Base RevC (DT) | Call trace: | dump_backtrace+0xf8/0x118 | show_stack+0x18/0x24 | dump_stack_lvl+0x50/0x68 | dump_stack+0x18/0x24 | sysfs_create_dir_ns+0xe0/0x13c | kobject_add_internal+0x220/0x3d4 | kobject_add+0x94/0x100 | device_add+0x144/0x5d8 | device_register+0x20/0x30 | ffa_device_register+0x88/0xd8 | ffa_setup_partitions+0x108/0x1b8 | ffa_init+0x2ec/0x3a4 | do_one_initcall+0xcc/0x240 | do_initcall_level+0x8c/0xac | do_initcalls+0x54/0x94 | do_basic_setup+0x1c/0x28 | kernel_init_freeable+0x100/0x16c | kernel_init+0x20/0x1a0 | ret_from_fork+0x10/0x20 | kobject_add_internal failed for arm-ffa-8001 with -EEXIST, don't try to | register things with the same name in the same directory. | arm_ffa arm-ffa: unable to register device arm-ffa-8001 err=-17 | ARM FF-A: ffa_setup_partitions: failed to register partition ID 0x8001 By virtue of being random enough to avoid collisions when generated in a distributed system, there is no way to compress UUID keys to the number of bits required to identify each. We can eliminate '-' in the name but it is not worth eliminating 4 bytes and add unnecessary logic for doing that. Also v1.0 doesn't provide the UUID of the partitions which makes it hard to use the same for the device name. So to keep it simple, let us alloc an ID using ida_alloc() and append the same to "arm-ffa" to make up a unique device name. Also stash the id value in ffa_dev to help freeing the ID later when the device is destroyed. Fixes: e781858 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration") Reported-by: Lucian Paul-Trifu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sudeep Holla <[email protected]>

The cited commit adds a compeletion to remove dependency on rtnl lock. But it causes a deadlock for multiple encapsulations: crash> bt ffff8aece8a64000 PID: 1514557 TASK: ffff8aece8a64000 CPU: 3 COMMAND: "tc" #0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418 #2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898 #3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8 #4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb #5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core] #6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core] #7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core] #8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core] #9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core] #10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core] #11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core] torvalds#12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8 torvalds#13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower] torvalds#14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower] torvalds#15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047 torvalds#16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31 torvalds#17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853 torvalds#18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835 torvalds#19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27 torvalds#20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245 torvalds#21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482 torvalds#22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a torvalds#23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2 torvalds#24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2 torvalds#25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f torvalds#26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8 torvalds#27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c crash> bt 0xffff8aeb07544000 PID: 1110766 TASK: ffff8aeb07544000 CPU: 0 COMMAND: "kworker/u20:9" #0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418 #2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88 #3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b #4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core] #5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core] #6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core] #7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c #8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012 #9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d #10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f After the first encap is attached, flow will be added to encap entry's flows list. If neigh update is running at this time, the following encaps of the flow can't hold the encap_tbl_lock and sleep. If neigh update thread is waiting for that flow's init_done, deadlock happens. Fix it by holding lock outside of the for loop. If neigh update is running, prevent encap flows from offloading. Since the lock is held outside of the for loop, concurrent creation of encap entries is not allowed. So remove unnecessary wait_for_completion call for res_ready. Fixes: 95435ad ("net/mlx5e: Only access fully initialized flows in neigh update") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>

Currently, the per cpu upcall counters are allocated after the vport is created and inserted into the system. This could lead to the datapath accessing the counters before they are allocated resulting in a kernel Oops. Here is an example: PID: 59693 TASK: ffff0005f4f51500 CPU: 0 COMMAND: "ovs-vswitchd" #0 [ffff80000a39b5b0] __switch_to at ffffb70f0629f2f4 #1 [ffff80000a39b5d0] __schedule at ffffb70f0629f5cc #2 [ffff80000a39b650] preempt_schedule_common at ffffb70f0629fa60 #3 [ffff80000a39b670] dynamic_might_resched at ffffb70f0629fb58 #4 [ffff80000a39b680] mutex_lock_killable at ffffb70f062a1388 #5 [ffff80000a39b6a0] pcpu_alloc at ffffb70f0594460c #6 [ffff80000a39b750] __alloc_percpu_gfp at ffffb70f05944e68 #7 [ffff80000a39b760] ovs_vport_cmd_new at ffffb70ee6961b90 [openvswitch] ... PID: 58682 TASK: ffff0005b2f0bf00 CPU: 0 COMMAND: "kworker/0:3" #0 [ffff80000a5d2f40] machine_kexec at ffffb70f056a0758 #1 [ffff80000a5d2f70] __crash_kexec at ffffb70f057e2994 #2 [ffff80000a5d3100] crash_kexec at ffffb70f057e2ad8 #3 [ffff80000a5d3120] die at ffffb70f0628234c #4 [ffff80000a5d31e0] die_kernel_fault at ffffb70f062828a8 #5 [ffff80000a5d3210] __do_kernel_fault at ffffb70f056a31f4 #6 [ffff80000a5d3240] do_bad_area at ffffb70f056a32a4 #7 [ffff80000a5d3260] do_translation_fault at ffffb70f062a9710 #8 [ffff80000a5d3270] do_mem_abort at ffffb70f056a2f74 #9 [ffff80000a5d32a0] el1_abort at ffffb70f06297dac #10 [ffff80000a5d32d0] el1h_64_sync_handler at ffffb70f06299b24 #11 [ffff80000a5d3410] el1h_64_sync at ffffb70f056812dc torvalds#12 [ffff80000a5d3430] ovs_dp_upcall at ffffb70ee6963c84 [openvswitch] torvalds#13 [ffff80000a5d3470] ovs_dp_process_packet at ffffb70ee6963fdc [openvswitch] torvalds#14 [ffff80000a5d34f0] ovs_vport_receive at ffffb70ee6972c78 [openvswitch] torvalds#15 [ffff80000a5d36f0] netdev_port_receive at ffffb70ee6973948 [openvswitch] torvalds#16 [ffff80000a5d3720] netdev_frame_hook at ffffb70ee6973a28 [openvswitch] torvalds#17 [ffff80000a5d3730] __netif_receive_skb_core.constprop.0 at ffffb70f06079f90 We moved the per cpu upcall counter allocation to the existing vport alloc and free functions to solve this. Fixes: 95637d9 ("net: openvswitch: release vport resources on failure") Fixes: 1933ea3 ("net: openvswitch: Add support to count upcall packets") Signed-off-by: Eelco Chaudron <[email protected]> Reviewed-by: Simon Horman <[email protected]> Acked-by: Aaron Conole <[email protected]> Signed-off-by: David S. Miller <[email protected]>

The cited commit holds encap tbl lock unconditionally when setting up dests. But it may cause the following deadlock: PID: 1063722 TASK: ffffa062ca5d0000 CPU: 13 COMMAND: "handler8" #0 [ffffb14de05b7368] __schedule at ffffffffa1d5aa91 #1 [ffffb14de05b7410] schedule at ffffffffa1d5afdb #2 [ffffb14de05b7430] schedule_preempt_disabled at ffffffffa1d5b528 #3 [ffffb14de05b7440] __mutex_lock at ffffffffa1d5d6cb #4 [ffffb14de05b74e8] mutex_lock_nested at ffffffffa1d5ddeb #5 [ffffb14de05b74f8] mlx5e_tc_tun_encap_dests_set at ffffffffc12f2096 [mlx5_core] #6 [ffffb14de05b7568] post_process_attr at ffffffffc12d9fc5 [mlx5_core] #7 [ffffb14de05b75a0] mlx5e_tc_add_fdb_flow at ffffffffc12de877 [mlx5_core] #8 [ffffb14de05b75f0] __mlx5e_add_fdb_flow at ffffffffc12e0eef [mlx5_core] #9 [ffffb14de05b7660] mlx5e_tc_add_flow at ffffffffc12e12f7 [mlx5_core] #10 [ffffb14de05b76b8] mlx5e_configure_flower at ffffffffc12e1686 [mlx5_core] #11 [ffffb14de05b7720] mlx5e_rep_indr_offload at ffffffffc12e3817 [mlx5_core] torvalds#12 [ffffb14de05b7730] mlx5e_rep_indr_setup_tc_cb at ffffffffc12e388a [mlx5_core] torvalds#13 [ffffb14de05b7740] tc_setup_cb_add at ffffffffa1ab2ba8 torvalds#14 [ffffb14de05b77a0] fl_hw_replace_filter at ffffffffc0bdec2f [cls_flower] torvalds#15 [ffffb14de05b7868] fl_change at ffffffffc0be6caa [cls_flower] torvalds#16 [ffffb14de05b7908] tc_new_tfilter at ffffffffa1ab71f0 [1031218.028143] wait_for_completion+0x24/0x30 [1031218.028589] mlx5e_update_route_decap_flows+0x9a/0x1e0 [mlx5_core] [1031218.029256] mlx5e_tc_fib_event_work+0x1ad/0x300 [mlx5_core] [1031218.029885] process_one_work+0x24e/0x510 Actually no need to hold encap tbl lock if there is no encap action. Fix it by checking if encap action exists or not before holding encap tbl lock. Fixes: 37c3b9f ("net/mlx5e: Prevent encap offload when neigh update is running") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>

Normally, x->replay_esn and x->preplay_esn should be allocated at xfrm_alloc_replay_state_esn(...) in xfrm_state_construct(...), hence the xfrm_update_ae_params(...) is okay to update them. However, the current implementation of xfrm_new_ae(...) allows a malicious user to directly dereference a NULL pointer and crash the kernel like below. BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 8253067 P4D 8253067 PUD 8e0e067 PMD 0 Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 98 Comm: poc.npd Not tainted 6.4.0-rc7-00072-gdad9774deaf1 #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.o4 RIP: 0010:memcpy_orig+0xad/0x140 Code: e8 4c 89 5f e0 48 8d 7f e0 73 d2 83 c2 20 48 29 d6 48 29 d7 83 fa 10 72 34 4c 8b 06 4c 8b 4e 08 c RSP: 0018:ffff888008f57658 EFLAGS: 00000202 RAX: 0000000000000000 RBX: ffff888008bd0000 RCX: ffffffff8238e571 RDX: 0000000000000018 RSI: ffff888007f64844 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff888008f57818 R13: ffff888007f64aa4 R14: 0000000000000000 R15: 0000000000000000 FS: 00000000014013c0(0000) GS:ffff88806d600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000054d8000 CR4: 00000000000006f0 Call Trace: <TASK> ? __die+0x1f/0x70 ? page_fault_oops+0x1e8/0x500 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? __pfx_page_fault_oops+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x11/0x40 ? fixup_exception+0x36/0x460 ? _raw_spin_unlock_irqrestore+0x11/0x40 ? exc_page_fault+0x5e/0xc0 ? asm_exc_page_fault+0x26/0x30 ? xfrm_update_ae_params+0xd1/0x260 ? memcpy_orig+0xad/0x140 ? __pfx__raw_spin_lock_bh+0x10/0x10 xfrm_update_ae_params+0xe7/0x260 xfrm_new_ae+0x298/0x4e0 ? __pfx_xfrm_new_ae+0x10/0x10 ? __pfx_xfrm_new_ae+0x10/0x10 xfrm_user_rcv_msg+0x25a/0x410 ? __pfx_xfrm_user_rcv_msg+0x10/0x10 ? __alloc_skb+0xcf/0x210 ? stack_trace_save+0x90/0xd0 ? filter_irq_stacks+0x1c/0x70 ? __stack_depot_save+0x39/0x4e0 ? __kasan_slab_free+0x10a/0x190 ? kmem_cache_free+0x9c/0x340 ? netlink_recvmsg+0x23c/0x660 ? sock_recvmsg+0xeb/0xf0 ? __sys_recvfrom+0x13c/0x1f0 ? __x64_sys_recvfrom+0x71/0x90 ? do_syscall_64+0x3f/0x90 ? entry_SYSCALL_64_after_hwframe+0x72/0xdc ? copyout+0x3e/0x50 netlink_rcv_skb+0xd6/0x210 ? __pfx_xfrm_user_rcv_msg+0x10/0x10 ? __pfx_netlink_rcv_skb+0x10/0x10 ? __pfx_sock_has_perm+0x10/0x10 ? mutex_lock+0x8d/0xe0 ? __pfx_mutex_lock+0x10/0x10 xfrm_netlink_rcv+0x44/0x50 netlink_unicast+0x36f/0x4c0 ? __pfx_netlink_unicast+0x10/0x10 ? netlink_recvmsg+0x500/0x660 netlink_sendmsg+0x3b7/0x700 This Null-ptr-deref bug is assigned CVE-2023-3772. And this commit adds additional NULL check in xfrm_update_ae_params to fix the NPD. Fixes: d8647b7 ("xfrm: Add user interface for esn and big anti-replay windows") Signed-off-by: Lin Ma <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>

Disable BH around the call to napi_schedule() to avoid following error: NOHZ tick-stop error: local softirq work is pending, handler #8!!! Fixes: ec4c7e1 ("lan78xx: Introduce NAPI polling support") Signed-off-by: Oleksij Rempel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

Fix softirq's not being handled during napi_schedule() call when receiving marker packets for queue disable by disabling local bottom half. The issue can be seen on ifdown: NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #8!!! Using ftrace to catch the failing scenario: ifconfig [003] d.... 22739.830624: softirq_raise: vec=3 [action=NET_RX] <idle>-0 [003] ..s.. 22739.831357: softirq_entry: vec=3 [action=NET_RX] No interrupt and CPU is idle. After the patch when disabling local BH before calling napi_schedule: ifconfig [003] d.... 22993.928336: softirq_raise: vec=3 [action=NET_RX] ifconfig [003] ..s1. 22993.928337: softirq_entry: vec=3 [action=NET_RX] Fixes: c2d548c ("idpf: add TX splitq napi poll support") Reviewed-by: Jesse Brandeburg <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Signed-off-by: Emil Tantilov <[email protected]> Signed-off-by: Alan Brady <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Krishneil Singh <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>

At current x1e80100 interface table, interface #3 is wrongly connected to DP controller #0 and interface #4 wrongly connected to DP controller #2. Fix this problem by connect Interface #3 to DP controller #0 and interface #4 connect to DP controller #1. Also add interface #6, #7 and #8 connections to DP controller to complete x1e80100 interface table. Changs in V3: -- add v2 changes log Changs in V2: -- add x1e80100 to subject -- add Fixes Fixes: e3b1f36 ("drm/msm/dpu: Add X1E80100 support") Signed-off-by: Kuogee Hsieh <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Reviewed-by: Abel Vesa <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/585549/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Abhinav Kumar <[email protected]>

vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 torvalds#12 [ffffa65531497b68] printk at ffffffff89318306 torvalds#13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 torvalds#14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] torvalds#15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] torvalds#16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] torvalds#17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] torvalds#18 [ffffa65531497f10] kthread at ffffffff892d2e72 torvalds#19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Acked-by: Jason Wang <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>

When CONFIG_DEBUG_BUGVERBOSE=n, we fail to add necessary padding bytes to bug_table entries, and as a result the last entry in a bug table will be ignored, potentially leading to an unexpected panic(). All prior entries in the table will be handled correctly. The arm64 ABI requires that struct fields of up to 8 bytes are naturally-aligned, with padding added within a struct such that struct are suitably aligned within arrays. When CONFIG_DEBUG_BUGVERPOSE=y, the layout of a bug_entry is: struct bug_entry { signed int bug_addr_disp; // 4 bytes signed int file_disp; // 4 bytes unsigned short line; // 2 bytes unsigned short flags; // 2 bytes } ... with 12 bytes total, requiring 4-byte alignment. When CONFIG_DEBUG_BUGVERBOSE=n, the layout of a bug_entry is: struct bug_entry { signed int bug_addr_disp; // 4 bytes unsigned short flags; // 2 bytes < implicit padding > // 2 bytes } ... with 8 bytes total, with 6 bytes of data and 2 bytes of trailing padding, requiring 4-byte alginment. When we create a bug_entry in assembly, we align the start of the entry to 4 bytes, which implicitly handles padding for any prior entries. However, we do not align the end of the entry, and so when CONFIG_DEBUG_BUGVERBOSE=n, the final entry lacks the trailing padding bytes. For the main kernel image this is not a problem as find_bug() doesn't depend on the trailing padding bytes when searching for entries: for (bug = __start___bug_table; bug < __stop___bug_table; ++bug) if (bugaddr == bug_addr(bug)) return bug; However for modules, module_bug_finalize() depends on the trailing bytes when calculating the number of entries: mod->num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry); ... and as the last bug_entry lacks the necessary padding bytes, this entry will not be counted, e.g. in the case of a single entry: sechdrs[i].sh_size == 6 sizeof(struct bug_entry) == 8; sechdrs[i].sh_size / sizeof(struct bug_entry) == 0; Consequently module_find_bug() will miss the last bug_entry when it does: for (i = 0; i < mod->num_bugs; ++i, ++bug) if (bugaddr == bug_addr(bug)) goto out; ... which can lead to a kenrel panic due to an unhandled bug. This can be demonstrated with the following module: static int __init buginit(void) { WARN(1, "hello\n"); return 0; } static void __exit bugexit(void) { } module_init(buginit); module_exit(bugexit); MODULE_LICENSE("GPL"); ... which will trigger a kernel panic when loaded: ------------[ cut here ]------------ hello Unexpected kernel BRK exception at EL1 Internal error: BRK handler: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: hello(O+) CPU: 0 PID: 50 Comm: insmod Tainted: G O 6.9.1 #8 Hardware name: linux,dummy-virt (DT) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : buginit+0x18/0x1000 [hello] lr : buginit+0x18/0x1000 [hello] sp : ffff800080533ae0 x29: ffff800080533ae0 x28: 0000000000000000 x27: 0000000000000000 x26: ffffaba8c4e70510 x25: ffff800080533c30 x24: ffffaba8c4a28a58 x23: 0000000000000000 x22: 0000000000000000 x21: ffff3947c0eab3c0 x20: ffffaba8c4e3f000 x19: ffffaba846464000 x18: 0000000000000006 x17: 0000000000000000 x16: ffffaba8c2492834 x15: 0720072007200720 x14: 0720072007200720 x13: ffffaba8c49b27c8 x12: 0000000000000312 x11: 0000000000000106 x10: ffffaba8c4a0a7c8 x9 : ffffaba8c49b27c8 x8 : 00000000ffffefff x7 : ffffaba8c4a0a7c8 x6 : 80000000fffff000 x5 : 0000000000000107 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff3947c0eab3c0 Call trace: buginit+0x18/0x1000 [hello] do_one_initcall+0x80/0x1c8 do_init_module+0x60/0x218 load_module+0x1ba4/0x1d70 __do_sys_init_module+0x198/0x1d0 __arm64_sys_init_module+0x1c/0x28 invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xd8 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x190/0x194 Code: d0ffffe0 910003fd 91000000 9400000b (d4210000) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: BRK handler: Fatal exception Fix this by always aligning the end of a bug_entry to 4 bytes, which is correct regardless of CONFIG_DEBUG_BUGVERBOSE. Fixes: 9fb7410 ("arm64/BUG: Use BRK instruction for generic BUG traps") Signed-off-by: Yuanbin Xie <[email protected]> Signed-off-by: Jiangfeng Xiao <[email protected]> Reviewed-by: Mark Rutland <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>

A system crash like this Failing address: 200000cb7df6f000 TEID: 200000cb7df6f403 Fault in home space mode while using kernel ASCE. AS:00000002d71bc007 R3:00000003fe5b8007 S:000000011a446000 P:000000015660c13d Oops: 0038 ilc:3 [#1] PREEMPT SMP Modules linked in: mlx5_ib ... CPU: 8 PID: 7556 Comm: bash Not tainted 6.9.0-rc7 #8 Hardware name: IBM 3931 A01 704 (LPAR) Krnl PSW : 0704e00180000000 0000014b75e7b606 (ap_parse_bitmap_str+0x10e/0x1f8) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 0000000000000001 ffffffffffffffc0 0000000000000001 00000048f96b75d3 000000cb00000100 ffffffffffffffff ffffffffffffffff 000000cb7df6fce0 000000cb7df6fce0 00000000ffffffff 000000000000002b 00000048ffffffff 000003ff9b2dbc80 200000cb7df6fcd8 0000014bffffffc0 000000cb7df6fbc8 Krnl Code: 0000014b75e7b5fc: a7840047 brc 8,0000014b75e7b68a 0000014b75e7b600: 18b2 lr %r11,%r2 #0000014b75e7b602: a7f4000a brc 15,0000014b75e7b616 >0000014b75e7b606: eb22d00000e6 laog %r2,%r2,0(%r13) 0000014b75e7b60c: a7680001 lhi %r6,1 0000014b75e7b610: 187b lr %r7,%r11 0000014b75e7b612: 84960021 brxh %r9,%r6,0000014b75e7b654 0000014b75e7b616: 18e9 lr %r14,%r9 Call Trace: [<0000014b75e7b606>] ap_parse_bitmap_str+0x10e/0x1f8 ([<0000014b75e7b5dc>] ap_parse_bitmap_str+0xe4/0x1f8) [<0000014b75e7b758>] apmask_store+0x68/0x140 [<0000014b75679196>] kernfs_fop_write_iter+0x14e/0x1e8 [<0000014b75598524>] vfs_write+0x1b4/0x448 [<0000014b7559894c>] ksys_write+0x74/0x100 [<0000014b7618a440>] __do_syscall+0x268/0x328 [<0000014b761a3558>] system_call+0x70/0x98 INFO: lockdep is turned off. Last Breaking-Event-Address: [<0000014b75e7b636>] ap_parse_bitmap_str+0x13e/0x1f8 Kernel panic - not syncing: Fatal exception: panic_on_oops occured when /sys/bus/ap/a[pq]mask was updated with a relative mask value (like +0x10-0x12,+60,-90) with one of the numeric values exceeding INT_MAX. The fix is simple: use unsigned long values for the internal variables. The correct checks are already in place in the function but a simple int for the internal variables was used with the possibility to overflow. Reported-by: Marc Hartmayer <[email protected]> Signed-off-by: Harald Freudenberger <[email protected]> Tested-by: Marc Hartmayer <[email protected]> Reviewed-by: Holger Dengler <[email protected]> Cc: <[email protected]> Signed-off-by: Heiko Carstens <[email protected]>

Currently if we request a feature that is not set in the Kernel config we fail silently and return all the available features. However, the man page indicates we should return an EINVAL. We need to fix this issue since we can end up with a Kernel warning should a program request the feature UFFD_FEATURE_WP_UNPOPULATED on a kernel with the config not set with this feature. [ 200.812896] WARNING: CPU: 91 PID: 13634 at mm/memory.c:1660 zap_pte_range+0x43d/0x660 [ 200.820738] Modules linked in: [ 200.869387] CPU: 91 PID: 13634 Comm: userfaultfd Kdump: loaded Not tainted 6.9.0-rc5+ #8 [ 200.877477] Hardware name: Dell Inc. PowerEdge R6525/0N7YGH, BIOS 2.7.3 03/30/2022 [ 200.885052] RIP: 0010:zap_pte_range+0x43d/0x660 Link: https://lkml.kernel.org/r/[email protected] Fixes: e06f1e1 ("userfaultfd: wp: enabled write protection in userfaultfd API") Signed-off-by: Audra Mitchell <[email protected]> Cc: Al Viro <[email protected]> Cc: Andrea Arcangeli <[email protected]> Cc: Christian Brauner <[email protected]> Cc: Jan Kara <[email protected]> Cc: Mike Rapoport <[email protected]> Cc: Peter Xu <[email protected]> Cc: Rafael Aquini <[email protected]> Cc: Shaohua Li <[email protected]> Cc: Shuah Khan <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

The test thread will start N benchmark kthreads and then schedule out until the test time finished and notify the benchmark kthreads to stop. The benchmark kthreads will keep running until notified to stop. There's a problem with current implementation when the benchmark kthreads number is equal to the CPUs on a non-preemptible kernel: since the scheduler will balance the kthreads across the CPUs and when the test time's out the test thread won't get a chance to be scheduled on any CPU then cannot notify the benchmark kthreads to stop. This can be easily reproduced on a VM (simulated with 16 CPUs) with PREEMPT_VOLUNTARY: estuary:/mnt$ ./dma_map_benchmark -t 16 -s 1 rcu: INFO: rcu_sched self-detected stall on CPU rcu: 10-...!: (5221 ticks this GP) idle=ed24/1/0x4000000000000000 softirq=142/142 fqs=0 rcu: (t=5254 jiffies g=-559 q=45 ncpus=16) rcu: rcu_sched kthread starved for 5255 jiffies! g-559 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=12 rcu: Unless rcu_sched kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_sched state:R running task stack:0 pid:16 tgid:16 ppid:2 flags:0x00000008 Call trace __switch_to+0xec/0x138 __schedule+0x2f8/0x1080 schedule+0x30/0x130 schedule_timeout+0xa0/0x188 rcu_gp_fqs_loop+0x128/0x528 rcu_gp_kthread+0x1c8/0x208 kthread+0xec/0xf8 ret_from_fork+0x10/0x20 Sending NMI from CPU 10 to CPUs 0: NMI backtrace for cpu 0 CPU: 0 PID: 332 Comm: dma-map-benchma Not tainted 6.10.0-rc1-vanilla-LSE #8 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : arm_smmu_cmdq_issue_cmdlist+0x218/0x730 lr : arm_smmu_cmdq_issue_cmdlist+0x488/0x730 sp : ffff80008748b630 x29: ffff80008748b630 x28: 0000000000000000 x27: ffff80008748b780 x26: 0000000000000000 x25: 000000000000bc70 x24: 000000000001bc70 x23: ffff0000c12af080 x22: 0000000000010000 x21: 000000000000ffff x20: ffff80008748b700 x19: ffff0000c12af0c0 x18: 0000000000010000 x17: 0000000000000001 x16: 0000000000000040 x15: ffffffffffffffff x14: 0001ffffffffffff x13: 000000000000ffff x12: 00000000000002f1 x11: 000000000001ffff x10: 0000000000000031 x9 : ffff800080b6b0b8 x8 : ffff0000c2a48000 x7 : 000000000001bc71 x6 : 0001800000000000 x5 : 00000000000002f1 x4 : 01ffffffffffffff x3 : 000000000009aaf1 x2 : 0000000000000018 x1 : 000000000000000f x0 : ffff0000c12af18c Call trace: arm_smmu_cmdq_issue_cmdlist+0x218/0x730 __arm_smmu_tlb_inv_range+0xe0/0x1a8 arm_smmu_iotlb_sync+0xc0/0x128 __iommu_dma_unmap+0x248/0x320 iommu_dma_unmap_page+0x5c/0xe8 dma_unmap_page_attrs+0x38/0x1d0 map_benchmark_thread+0x118/0x2c0 kthread+0xec/0xf8 ret_from_fork+0x10/0x20 Solve this by adding scheduling point in the kthread loop, so if there're other threads in the system they may have a chance to run, especially the thread to notify the test end. However this may degrade the test concurrency so it's recommended to run this on an idle system. Signed-off-by: Yicong Yang <[email protected]> Acked-by: Barry Song <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>

…le_direct_reclaim() The task sometimes continues looping in throttle_direct_reclaim() because allow_direct_reclaim(pgdat) keeps returning false. #0 [ffff80002cb6f8d0] __switch_to at ffff8000080095ac #1 [ffff80002cb6f900] __schedule at ffff800008abbd1c #2 [ffff80002cb6f990] schedule at ffff800008abc50c #3 [ffff80002cb6f9b0] throttle_direct_reclaim at ffff800008273550 #4 [ffff80002cb6fa20] try_to_free_pages at ffff800008277b68 #5 [ffff80002cb6fae0] __alloc_pages_nodemask at ffff8000082c4660 #6 [ffff80002cb6fc50] alloc_pages_vma at ffff8000082e4a98 #7 [ffff80002cb6fca0] do_anonymous_page at ffff80000829f5a8 #8 [ffff80002cb6fce0] __handle_mm_fault at ffff8000082a5974 #9 [ffff80002cb6fd90] handle_mm_fault at ffff8000082a5bd4 At this point, the pgdat contains the following two zones: NODE: 4 ZONE: 0 ADDR: ffff00817fffe540 NAME: "DMA32" SIZE: 20480 MIN/LOW/HIGH: 11/28/45 VM_STAT: NR_FREE_PAGES: 359 NR_ZONE_INACTIVE_ANON: 18813 NR_ZONE_ACTIVE_ANON: 0 NR_ZONE_INACTIVE_FILE: 50 NR_ZONE_ACTIVE_FILE: 0 NR_ZONE_UNEVICTABLE: 0 NR_ZONE_WRITE_PENDING: 0 NR_MLOCK: 0 NR_BOUNCE: 0 NR_ZSPAGES: 0 NR_FREE_CMA_PAGES: 0 NODE: 4 ZONE: 1 ADDR: ffff00817fffec00 NAME: "Normal" SIZE: 8454144 PRESENT: 98304 MIN/LOW/HIGH: 68/166/264 VM_STAT: NR_FREE_PAGES: 146 NR_ZONE_INACTIVE_ANON: 94668 NR_ZONE_ACTIVE_ANON: 3 NR_ZONE_INACTIVE_FILE: 735 NR_ZONE_ACTIVE_FILE: 78 NR_ZONE_UNEVICTABLE: 0 NR_ZONE_WRITE_PENDING: 0 NR_MLOCK: 0 NR_BOUNCE: 0 NR_ZSPAGES: 0 NR_FREE_CMA_PAGES: 0 In allow_direct_reclaim(), while processing ZONE_DMA32, the sum of inactive/active file-backed pages calculated in zone_reclaimable_pages() based on the result of zone_page_state_snapshot() is zero. Additionally, since this system lacks swap, the calculation of inactive/ active anonymous pages is skipped. crash> p nr_swap_pages nr_swap_pages = $1937 = { counter = 0 } As a result, ZONE_DMA32 is deemed unreclaimable and skipped, moving on to the processing of the next zone, ZONE_NORMAL, despite ZONE_DMA32 having free pages significantly exceeding the high watermark. The problem is that the pgdat->kswapd_failures hasn't been incremented. crash> px ((struct pglist_data *) 0xffff00817fffe540)->kswapd_failures $1935 = 0x0 This is because the node deemed balanced. The node balancing logic in balance_pgdat() evaluates all zones collectively. If one or more zones (e.g., ZONE_DMA32) have enough free pages to meet their watermarks, the entire node is deemed balanced. This causes balance_pgdat() to exit early before incrementing the kswapd_failures, as it considers the overall memory state acceptable, even though some zones (like ZONE_NORMAL) remain under significant pressure. The patch ensures that zone_reclaimable_pages() includes free pages (NR_FREE_PAGES) in its calculation when no other reclaimable pages are available (e.g., file-backed or anonymous pages). This change prevents zones like ZONE_DMA32, which have sufficient free pages, from being mistakenly deemed unreclaimable. By doing so, the patch ensures proper node balancing, avoids masking pressure on other zones like ZONE_NORMAL, and prevents infinite loops in throttle_direct_reclaim() caused by allow_direct_reclaim(pgdat) repeatedly returning false. The kernel hangs due to a task stuck in throttle_direct_reclaim(), caused by a node being incorrectly deemed balanced despite pressure in certain zones, such as ZONE_NORMAL. This issue arises from zone_reclaimable_pages() returning 0 for zones without reclaimable file- backed or anonymous pages, causing zones like ZONE_DMA32 with sufficient free pages to be skipped. The lack of swap or reclaimable pages results in ZONE_DMA32 being ignored during reclaim, masking pressure in other zones. Consequently, pgdat->kswapd_failures remains 0 in balance_pgdat(), preventing fallback mechanisms in allow_direct_reclaim() from being triggered, leading to an infinite loop in throttle_direct_reclaim(). This patch modifies zone_reclaimable_pages() to account for free pages (NR_FREE_PAGES) when no other reclaimable pages exist. This ensures zones with sufficient free pages are not skipped, enabling proper balancing and reclaim behavior. [[email protected]: coding-style cleanups] Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: 5a1c84b ("mm: remove reclaim and compaction retry approximations") Signed-off-by: Seiji Nishikawa <[email protected]> Cc: Mel Gorman <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

This fixes the following hard lockup in isolate_lru_folios() during memory reclaim. If the LRU mostly contains ineligible folios this may trigger watchdog. watchdog: Watchdog detected hard LOCKUP on cpu 173 RIP: 0010:native_queued_spin_lock_slowpath+0x255/0x2a0 Call Trace: _raw_spin_lock_irqsave+0x31/0x40 folio_lruvec_lock_irqsave+0x5f/0x90 folio_batch_move_lru+0x91/0x150 lru_add_drain_per_cpu+0x1c/0x40 process_one_work+0x17d/0x350 worker_thread+0x27b/0x3a0 kthread+0xe8/0x120 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1b/0x30 lruvec->lru_lock owner： PID: 2865 TASK: ffff888139214d40 CPU: 40 COMMAND: "kswapd0" #0 [fffffe0000945e60] crash_nmi_callback at ffffffffa567a555 #1 [fffffe0000945e68] nmi_handle at ffffffffa563b171 #2 [fffffe0000945eb0] default_do_nmi at ffffffffa6575920 #3 [fffffe0000945ed0] exc_nmi at ffffffffa6575af4 #4 [fffffe0000945ef0] end_repeat_nmi at ffffffffa6601dde [exception RIP: isolate_lru_folios+403] RIP: ffffffffa597df53 RSP: ffffc90006fb7c28 RFLAGS: 00000002 RAX: 0000000000000001 RBX: ffffc90006fb7c60 RCX: ffffea04a2196f88 RDX: ffffc90006fb7c60 RSI: ffffc90006fb7c60 RDI: ffffea04a2197048 RBP: ffff88812cbd3010 R8: ffffea04a2197008 R9: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: ffffea04a2197008 R13: ffffea04a2197048 R14: ffffc90006fb7de8 R15: 0000000003e3e937 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 <NMI exception stack> #5 [ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53 #6 [ffffc90006fb7cf8] shrink_active_list at ffffffffa597f788 #7 [ffffc90006fb7da8] balance_pgdat at ffffffffa5986db0 #8 [ffffc90006fb7ec0] kswapd at ffffffffa5987354 #9 [ffffc90006fb7ef8] kthread at ffffffffa5748238 crash> Scenario: User processe are requesting a large amount of memory and keep page active. Then a module continuously requests memory from ZONE_DMA32 area. Memory reclaim will be triggered due to ZONE_DMA32 watermark alarm reached. However pages in the LRU(active_anon) list are mostly from the ZONE_NORMAL area. Reproduce: Terminal 1: Construct to continuously increase pages active(anon). mkdir /tmp/memory mount -t tmpfs -o size=1024000M tmpfs /tmp/memory dd if=/dev/zero of=/tmp/memory/block bs=4M tail /tmp/memory/block Terminal 2: vmstat -a 1 active will increase. procs ---memory--- ---swap-- ---io---- -system-- ---cpu--- ... r b swpd free inact active si so bi bo 1 0 0 1445623076 45898836 83646008 0 0 0 1 0 0 1445623076 43450228 86094616 0 0 0 1 0 0 1445623076 41003480 88541364 0 0 0 1 0 0 1445623076 38557088 90987756 0 0 0 1 0 0 1445623076 36109688 93435156 0 0 0 1 0 0 1445619552 33663256 95881632 0 0 0 1 0 0 1445619804 31217140 98327792 0 0 0 1 0 0 1445619804 28769988 100774944 0 0 0 1 0 0 1445619804 26322348 103222584 0 0 0 1 0 0 1445619804 23875592 105669340 0 0 0 cat /proc/meminfo | head Active(anon) increase. MemTotal: 1579941036 kB MemFree: 1445618500 kB MemAvailable: 1453013224 kB Buffers: 6516 kB Cached: 128653956 kB SwapCached: 0 kB Active: 118110812 kB Inactive: 11436620 kB Active(anon): 115345744 kB Inactive(anon): 945292 kB When the Active(anon) is 115345744 kB, insmod module triggers the ZONE_DMA32 watermark. perf record -e vmscan:mm_vmscan_lru_isolate -aR perf script isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=2 nr_skipped=2 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=0 nr_skipped=0 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=28835844 nr_skipped=28835844 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=28835844 nr_skipped=28835844 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=29 nr_skipped=29 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=0 nr_skipped=0 nr_taken=0 lru=active_anon See nr_scanned=28835844. 28835844 * 4k = 115343376KB approximately equal to 115345744 kB. If increase Active(anon) to 1000G then insmod module triggers the ZONE_DMA32 watermark. hard lockup will occur. In my device nr_scanned = 0000000003e3e937 when hard lockup. Convert to memory size 0x0000000003e3e937 * 4KB = 261072092 KB. [ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53 ffffc90006fb7c30: 0000000000000020 0000000000000000 ffffc90006fb7c40: ffffc90006fb7d40 ffff88812cbd3000 ffffc90006fb7c50: ffffc90006fb7d30 0000000106fb7de8 ffffc90006fb7c60: ffffea04a2197008 ffffea0006ed4a48 ffffc90006fb7c70: 0000000000000000 0000000000000000 ffffc90006fb7c80: 0000000000000000 0000000000000000 ffffc90006fb7c90: 0000000000000000 0000000000000000 ffffc90006fb7ca0: 0000000000000000 0000000003e3e937 ffffc90006fb7cb0: 0000000000000000 0000000000000000 ffffc90006fb7cc0: 8d7c0b56b7874b00 ffff88812cbd3000 About the Fixes: Why did it take eight years to be discovered? The problem requires the following conditions to occur: 1. The device memory should be large enough. 2. Pages in the LRU(active_anon) list are mostly from the ZONE_NORMAL area. 3. The memory in ZONE_DMA32 needs to reach the watermark. If the memory is not large enough, or if the usage design of ZONE_DMA32 area memory is reasonable, this problem is difficult to detect. notes: The problem is most likely to occur in ZONE_DMA32 and ZONE_NORMAL, but other suitable scenarios may also trigger the problem. Link: https://lkml.kernel.org/r/[email protected] Fixes: b2e1875 ("mm, vmscan: begin reclaiming pages on a per-node basis") Signed-off-by: liuye <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Yang Shi <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

libtraceevent parses and returns an array of argument fields, sometimes larger than RAW_SYSCALL_ARGS_NUM (6) because it includes "__syscall_nr", idx will traverse to index 6 (7th element) whereas sc->fmt->arg holds 6 elements max, creating an out-of-bounds access. This runtime error is found by UBsan. The error message: $ sudo UBSAN_OPTIONS=print_stacktrace=1 ./perf trace -a --max-events=1 builtin-trace.c:1966:35: runtime error: index 6 out of bounds for type 'syscall_arg_fmt [6]' #0 0x5c04956be5fe in syscall__alloc_arg_fmts /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:1966 #1 0x5c04956c0510 in trace__read_syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2110 #2 0x5c04956c372b in trace__syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2436 #3 0x5c04956d2f39 in trace__init_syscalls_bpf_prog_array_maps /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:3897 #4 0x5c04956d6d25 in trace__run /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:4335 #5 0x5c04956e112e in cmd_trace /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:5502 #6 0x5c04956eda7d in run_builtin /home/howard/hw/linux-perf/tools/perf/perf.c:351 #7 0x5c04956ee0a8 in handle_internal_command /home/howard/hw/linux-perf/tools/perf/perf.c:404 #8 0x5c04956ee37f in run_argv /home/howard/hw/linux-perf/tools/perf/perf.c:448 #9 0x5c04956ee8e9 in main /home/howard/hw/linux-perf/tools/perf/perf.c:556 #10 0x79eb3622a3b7 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 #11 0x79eb3622a47a in __libc_start_main_impl ../csu/libc-start.c:360 torvalds#12 0x5c04955422d4 in _start (/home/howard/hw/linux-perf/tools/perf/perf+0x4e02d4) (BuildId: 5b6cab2d59e96a4341741765ad6914a4d784dbc6) 0.000 ( 0.014 ms): Chrome_ChildIO/117244 write(fd: 238, buf: !, count: 1) = 1 Fixes: 5e58fcf ("perf trace: Allow allocating sc->arg_fmt even without the syscall tracepoint") Signed-off-by: Howard Chu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Namhyung Kim <[email protected]>

This fixes the following hard lockup in isolate_lru_folios() during memory reclaim. If the LRU mostly contains ineligible folios this may trigger watchdog. watchdog: Watchdog detected hard LOCKUP on cpu 173 RIP: 0010:native_queued_spin_lock_slowpath+0x255/0x2a0 Call Trace: _raw_spin_lock_irqsave+0x31/0x40 folio_lruvec_lock_irqsave+0x5f/0x90 folio_batch_move_lru+0x91/0x150 lru_add_drain_per_cpu+0x1c/0x40 process_one_work+0x17d/0x350 worker_thread+0x27b/0x3a0 kthread+0xe8/0x120 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1b/0x30 lruvec->lru_lock owner： PID: 2865 TASK: ffff888139214d40 CPU: 40 COMMAND: "kswapd0" #0 [fffffe0000945e60] crash_nmi_callback at ffffffffa567a555 #1 [fffffe0000945e68] nmi_handle at ffffffffa563b171 #2 [fffffe0000945eb0] default_do_nmi at ffffffffa6575920 #3 [fffffe0000945ed0] exc_nmi at ffffffffa6575af4 #4 [fffffe0000945ef0] end_repeat_nmi at ffffffffa6601dde [exception RIP: isolate_lru_folios+403] RIP: ffffffffa597df53 RSP: ffffc90006fb7c28 RFLAGS: 00000002 RAX: 0000000000000001 RBX: ffffc90006fb7c60 RCX: ffffea04a2196f88 RDX: ffffc90006fb7c60 RSI: ffffc90006fb7c60 RDI: ffffea04a2197048 RBP: ffff88812cbd3010 R8: ffffea04a2197008 R9: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: ffffea04a2197008 R13: ffffea04a2197048 R14: ffffc90006fb7de8 R15: 0000000003e3e937 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 <NMI exception stack> #5 [ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53 #6 [ffffc90006fb7cf8] shrink_active_list at ffffffffa597f788 #7 [ffffc90006fb7da8] balance_pgdat at ffffffffa5986db0 #8 [ffffc90006fb7ec0] kswapd at ffffffffa5987354 #9 [ffffc90006fb7ef8] kthread at ffffffffa5748238 crash> Scenario: User processe are requesting a large amount of memory and keep page active. Then a module continuously requests memory from ZONE_DMA32 area. Memory reclaim will be triggered due to ZONE_DMA32 watermark alarm reached. However pages in the LRU(active_anon) list are mostly from the ZONE_NORMAL area. Reproduce: Terminal 1: Construct to continuously increase pages active(anon). mkdir /tmp/memory mount -t tmpfs -o size=1024000M tmpfs /tmp/memory dd if=/dev/zero of=/tmp/memory/block bs=4M tail /tmp/memory/block Terminal 2: vmstat -a 1 active will increase. procs ---memory--- ---swap-- ---io---- -system-- ---cpu--- ... r b swpd free inact active si so bi bo 1 0 0 1445623076 45898836 83646008 0 0 0 1 0 0 1445623076 43450228 86094616 0 0 0 1 0 0 1445623076 41003480 88541364 0 0 0 1 0 0 1445623076 38557088 90987756 0 0 0 1 0 0 1445623076 36109688 93435156 0 0 0 1 0 0 1445619552 33663256 95881632 0 0 0 1 0 0 1445619804 31217140 98327792 0 0 0 1 0 0 1445619804 28769988 100774944 0 0 0 1 0 0 1445619804 26322348 103222584 0 0 0 1 0 0 1445619804 23875592 105669340 0 0 0 cat /proc/meminfo | head Active(anon) increase. MemTotal: 1579941036 kB MemFree: 1445618500 kB MemAvailable: 1453013224 kB Buffers: 6516 kB Cached: 128653956 kB SwapCached: 0 kB Active: 118110812 kB Inactive: 11436620 kB Active(anon): 115345744 kB Inactive(anon): 945292 kB When the Active(anon) is 115345744 kB, insmod module triggers the ZONE_DMA32 watermark. perf record -e vmscan:mm_vmscan_lru_isolate -aR perf script isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=2 nr_skipped=2 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=0 nr_skipped=0 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=28835844 nr_skipped=28835844 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=28835844 nr_skipped=28835844 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=29 nr_skipped=29 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=0 nr_skipped=0 nr_taken=0 lru=active_anon See nr_scanned=28835844. 28835844 * 4k = 115343376KB approximately equal to 115345744 kB. If increase Active(anon) to 1000G then insmod module triggers the ZONE_DMA32 watermark. hard lockup will occur. In my device nr_scanned = 0000000003e3e937 when hard lockup. Convert to memory size 0x0000000003e3e937 * 4KB = 261072092 KB. [ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53 ffffc90006fb7c30: 0000000000000020 0000000000000000 ffffc90006fb7c40: ffffc90006fb7d40 ffff88812cbd3000 ffffc90006fb7c50: ffffc90006fb7d30 0000000106fb7de8 ffffc90006fb7c60: ffffea04a2197008 ffffea0006ed4a48 ffffc90006fb7c70: 0000000000000000 0000000000000000 ffffc90006fb7c80: 0000000000000000 0000000000000000 ffffc90006fb7c90: 0000000000000000 0000000000000000 ffffc90006fb7ca0: 0000000000000000 0000000003e3e937 ffffc90006fb7cb0: 0000000000000000 0000000000000000 ffffc90006fb7cc0: 8d7c0b56b7874b00 ffff88812cbd3000 About the Fixes: Why did it take eight years to be discovered? The problem requires the following conditions to occur: 1. The device memory should be large enough. 2. Pages in the LRU(active_anon) list are mostly from the ZONE_NORMAL area. 3. The memory in ZONE_DMA32 needs to reach the watermark. If the memory is not large enough, or if the usage design of ZONE_DMA32 area memory is reasonable, this problem is difficult to detect. notes: The problem is most likely to occur in ZONE_DMA32 and ZONE_NORMAL, but other suitable scenarios may also trigger the problem. Link: https://lkml.kernel.org/r/[email protected] Fixes: b2e1875 ("mm, vmscan: begin reclaiming pages on a per-node basis") Signed-off-by: liuye <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Yang Shi <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

vsense voltage regulator from STi-v3.10 branch #8

vsense voltage regulator from STi-v3.10 branch #8

waby38b commented May 10, 2023

vsense voltage regulator from STi-v3.10 branch #8

vsense voltage regulator from STi-v3.10 branch #8

Comments

waby38b commented May 10, 2023