UAV is don't following the waypoints in mission plane

[sampathkumarch]

Describe the bug

am using pixhawk v5 . pixhawk was integrated with standred plane but the plane was no rudder direction ( airframe reference standre plane ). all sensor calibration are done then after i flyed in manual and stabilize mode . then after i given way points for mission plane so when am start the mission then given little bit of movement the plane was started then i throw plane but the plane was not going proper waypoint it going wrong direction . that's why am change the mode into stabilize mode . my point is why it's going wrong waypoints . rudder problem or parameters issue or anything else please help me

To Reproduce
Steps to reproduce the behavior

1. all sensor calibrated gyro, mag ,airspeed ,comp. level, radio
2. intially fly with stabilized and manual mode
3. Uploaded mission (attach QGC mission file)
   4 .Took off
   5.error is go the wrong waypoints
4. Expected behavior

Log Files and Screenshots

https://review.px4.io/plot_app?log=e74f3807-eb85-4861-85f4-7ee5714dcf8f

[julianoes]

Duplicate of #12267.

[sampathkumarch]

this is the am given mission plane

…

On Fri, Jun 14, 2019 at 4:48 PM Julian Oes ***@***.***> wrote: Duplicate of #12267 <#12267>. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#12268>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AL6WXQ6QVH72BPRZBOHJ6VTP2N47ZANCNFSM4HYGFNJA> .