boards_header.txt

################################################################################
#                                                                              #
#       ####  ########  ########                  #####                        #
#      #    #    ##        ##                    ##```                         #
#      #    #    ##        ##   ### #   # #   #  ##      ###  ####  ####       #
#      ######    ##        ##    #  ##  #  # #   ##     #   # #   # #          #
#      #    #    ##        ##    #  # # #   #    ##     #   # ####  ###        #
#      #    #    ##        ##    #  #  ##   #    ##___  #   # # #   #          #
#      #    #    ##        ##   ### #   #   #     #####  ###  #  #  ####       #
#______________________________________________________________________________#
#                                                                              #
#      Copyright Spence Konde and other          ##                            #
#      contributors 2018-2021                   #  #                           #
#      megaTinyCore is free software.     # #     #        ###        ###      #
#      (LGPL v2.1) see LICENSE.md and     # #    #    ##         ##            #
#      License section of README.md        #    ####  ##         ##            #
#______________________________________________________________________________#
#                 BOARDS.TXT SHOULD NOT BE EDITED DIRECTLY                     #
#     It is generated with extras/development/create_boards_txt.py             #
#     That file is horrifying, but trying to maintain a >5k line boards.txt    #
#     was simply not tenable. Please submit no PRs to change boards.txt        #
#     Changes need to be made in those scripts instead.                        #
#______________________________________________________________________________#
#           THIS SHOULD BE CONSIDERED A BETA (AT BEST) CURRENTLY!              #
#           That is why the version above is not 2.0.0                         #
#______________________________________________________________________________#
#                                                                              #
#              ###  #   #  ####   #   #  ####  #   #  #   #   ###              #
#             #     #   #  #   #  ## ##  #     ##  #  #   #  #                 #
#              ###  #   #  ####   # # #  ###   # # #  #   #   ###              #
#                 # #   #  #   #  #   #  #     #  ##  #   #      #             #
#              ###   ###   ####   #   #  ####  #   #   ###    ###              #
#______________________________________________________________________________#
#                                                                              #
#    There are many menus provided for configuring various aspects of the      #
#    core. Many require setting fuses, and these are only written when the     #
#    "Burn Bootloader" command is used (even for boards without one - it       #
#    still is the only thing that sets fuses, because setting fuses wrong      #
#    can leave the board in a near-bricked state.                              #
#                                                                              #
#    Not all menus are available for all board - some are specific to one      #
#    bootloader, or to one or more boards. Refer to the documentation for      #
#    more information.                                                         #
#______________________________________________________________________________#

menu.chip=Chip
menu.clock=Clock Source+Speed (Only set on bootload)
menu.pinmap=Pin Mapping
menu.millis=millis()/micros()
menu.softserial=Built-in Software Serial ("Serial")
menu.bod=B.O.D. Level (Only set on bootload)

# Not used for bootloader configurations:
menu.eesave=Save EEPROM (Only set on bootload)


# Specific to the x41, 1634 and 828:
menu.bodact=B.O.D. Mode (active) (Only set on bootload)
menu.bodpd=B.O.D. Mode (sleep) (Only set on bootload)

# Specific to 828 and 841:
menu.wiremode=Wire Modes

# Specific to x41 and x61:
menu.remap=Peripheral Pin Mapping

# Only relevant for bootloader board definitions:
menu.bootentry=Bootloader Entry Conditions (only set on bootload)

# Specific to the 1634 and x41 with Optiboot:
menu.bootloaderuart=Bootloader UART (only set on bootload)

# Specific to the 861 with optiboot, replaces softserial
menu.softserial861=Built-in softserial ("Serial") and Optiboot pins


# Specific to Micronucleus:
menu.usbpins=Micronucleus USB Pins (set on bootload, must match hardware)
menu.burnmode=Burn Bootloader Method
menu.resetpin=Reset Pin (Only set on bootload via ISP)

# All parts, at the bottom
menu.optimization="Compiler optimization flags"
#______________________________________________________________________________#
#                                                                              #
#      ####    ###    ###   ####   ####       #   #  ###  #   # ####  ###      #
#      #   #  #   #  #   #  #   #  #   #      ##  # #   # ## ## #    #         #
#      ####   #   #  #####  ####   #   #      # # # ##### # # # ###   ###      #
#      #   #  #   #  #   #  #  #   #   #      #  ## #   # #   # #        #     #
#      ####    ###   #   #  #   #  ####       #   # #   # #   # ####  ###      #
#______________________________________________________________________________#